Reviews Rotor Gauge Kit

Fowler 74-150-020 EZ-Drum Electronic Brake Drum Gage

  • Central Tools-Brake Fforcee Rotor Gauge-Digital accuracy with Swiss electronics.-Drum gages have selectable depth stops to reduce measuring errors.-Pointed Aanvill measure scored or unscored surfaces.-Show customers why their rotors or drums need replacing or turning.-Rotor gages have depth rods to check pad and shoe wear.-Specifications:.
Check Stock

New Replacement PP204 HA3004 1/2 Rotor Kit for Desa Reddy Master Heater #70-022-0100

  • ⭐PP204 / HA3004 1/2" Rotor Kit,Includes Rotor, Vanes, and Insert Rotor Kit 1/2" Thick Dia= 2 1/8"..
  • ⭐This kit (includes the vanes and insert) is used on a variety of different heater models. The other part numbers are: Desa part# PP204, GHP....
  • ⭐Other Part Numbers: PP204 , HA3004 , M22456-1 , 70-022-0100 , 700220100 , 71-022-1300 , 710221300 , SP-KFA1000 , SPKFA1000 , KFA1000 , 68-3043,and....
  • ⭐This kit (includes the vanes and insert) is Suitable for a variety of different brands, including Reddy,DESA,Master, Remington, Knipco, Koehring,....
  • ⭐Please measure the thickness of the rotor or the rotor steel ring to insure that you order the correct part.[Installation instructions, as shown in....
Check Stock

Ignition Distributor Cap and Rotor Kit, Replace D328A 10452458 D465 Compatible with Chevy GMC 4.3 Vortec - 1996-2005 Astro, 1995-2005 Blazer, 1995-2004 S10, 1999-2006 Silverado, 1995-2001 Jimmy, More

  • REPLACeMENT IGNITION DISTRIBUTOR CAP AND ROTOR KIT : The distributor cap and rotor kit is located under the car's hood. Open the hood and look for a black component near the centre of the engine. The distributor caps are stress-relieved immediately after molding to ensure dimensional stability. Symptoms of a bad or failing distributor cap: The CEL is illuminated, the vehicle does not start, the engine idles rough. If you find the distributor cap worn out or cracked, replace it immediately..
  • COMPATIBLE WITH CHEVY, OLDSMOBILE VEHICLES : 4.3L V6 Vortec engine - 1996-2005 Astro | 1995-2005 Blazer | 1996-1998 C1500 | 1996-2007 Express 1500 | 1996-2005 Express 2500 | 1996-1998 K1500 | 1996-1999 P30 | 1995-2004 S10 | 1999-2006 Silverado 1500 | 2007 Silverado 1500 Classic | 1996-2001 Bravada ignition distributor cap and rotor kit..
  • REPLACES PART # : D328A, 10452458, D465, 10452457 ignition distributor cap and rotor kit. It can compatible with GMC 4.3L V6 Vortec : 1996-1998 C1500 | 1995-2001 Jimmy | 1996-1998 K1500 | 1996-1999 P3500 | 1996-2005 Safari | 1996-2007 Savana 1500 | 1996-2005 Savana 2500 | 1997-2002 Savana 3500 | 1999-2006 Sierra 1500 | 2007 Sierra 1500 Classic | 1995-2004 Sonoma. Please check the detailed description to confirm the compatibilit....
Check Stock

Replacement 5/8\ thick PP205 HA3005 Rotor Kit for Desa, Reddy, Dyna, Glo Mi-T-M Master Heater KFA1022 710221350 71-022-1010

  • PP205 5/8" thick Rotor Kit for Reddy Master Dyna Glo Mi-T-M Portable Forced Air Heater HA3005 KFA1022 710221350 71-022-1010.
  • Rotor Kit 5/8" Thick , Diameter= 2 1/8". Kit includes: ( 1 Rotor, 4 Vanes, and 1 Insert ) M22456-2 Rotor, M8643-2 Blades, M22009 Insert.
  • DESA: Dayton, Knipco, Koehring, Master, Reddy, Remington, Sears, TSC: (PP205, HA3005, M22456-2).
  • PINNACLE: ProTemp, Master, Remington, Heat-Stream, WorkHorse, Heat Hog & SunStream: (71-022-1350, 710221350, 71-022-1010, 710221010).
  • ◆【Note:】 please look carefully at the shopping cart you choose. Beware of quality and packaging. Low prices may not be the right thing to do.
Check Stock

Pro-Parts New Replacement PP204 HA3004 1/2\ Rotor Kit for Desa Master Reddy Sears Space Heaters #70-022-0100

  • PP204, HA3004, 1/2" Rotor Kit, Includes Rotor, Vanes, and Insert.
Check Stock

Sunlite BRAKESET SUNLT MX1000 ALY RRw/FT Bolt BK

  • Used for brake systems of ordinary bikes, mountain bikes and road bikes..
  • Freewheel Threaded Hubs, Hole distance of 48mm, an inner diameter of 34mm(approx).
  • Position: Front / Rear. F-160mm/R-140mm. F-180mm/R-160mm. ROTOR MOUNTING BOLTS are included.
  • Note: F160 Front Brake: (Also named F160/R140) If installed at front wheel, it fits 160mm rotor, but if installed at rear wheel, it fits 140mm rotor. R160 Rear Brake: (Also named F180/R160) If installed at front wheel, it fits 180mm rotor, but if installed at rear wheel, it fits 160mm rotor..
  • Package Content: Mechanical Bike 160mm Rotor Front and Back Brake Disc Kit x 1.
Check Stock

BlueSunshine Front and Back Disk Brake Kit - 160mm For 80cc Gas Motorized Bicycle - Freewheel Threaded Hubs Hole distance of 48mm

  • Complete 26" Mechanical Disk Brake Kit, Front and Back - 160mm rotor diameter..
  • Center 6 bolt pattern diameter on rotor is 48mm..
  • This kit comes with 2 mounting adapter, your hub need to either have the same 6 bolt pattern to mount the rotor directly or you can use the mounting adapter on your threaded hub (1.37 x 24 tpi)..
  • This kit works best with our motorized bicycle frames and KMB frames..
  • Caliper Holders are NOT included but are required..
Check Stock

St. Croix Blower- Distribution / Convection Room-Air Motor, 80P20000-R - Replaces OEM Part

  • PP204, HA3004, 1/2" Rotor Kit and PP214 Filter Kit.
Check Stock

PP204 HA3004 1/2\ Rotor Kit Replacement - for Desa Master Reddy Sears Space Heaters # 70-022-0100 SP-KFA1000, 68-3043

  • PP205 Rotor Kit (HA3005) Fits many Reddy, Desa models.
  • Kit includes Insert M22009, Rotor M224561,4 blades M8643, and intake filter M29633 used as required.
  • Rotor Kit 5/8" ,Thick Dia= 2 1/8". Fit Models: Mi-T-M part# 68-3044.
  • DESA: Dayton, Knipco, Koehring, Master, Reddy, Remington, Sears, TSC: (PP205, HA3005, M22456-2).
  • PINNACLE: ProTemp, Master, Remington, Heat-Stream, WorkHorse, Heat Hog & SunStream: (71-022-1350, 710221350, 71-022-1010, 710221010) GHP: RMC, Dyna-Glo, Thermoheat, Dyna Glo Pro, Dyna Glo Delux: (SP-KFA1022, SPKFA1022, KFA1022).
Check Stock

Protech 51-102500-01 1/2 hp 120/1/60 Blower Motor

  • HIGH TORQUE: Adopting high quality motor steel material, DROK 3d printer stepper motor kit is provided with high torque (0.46 Nm/ 65 oz-in), low self-inductance reactance, responsive and can avoid system error..
  • LOW NOISE: The internal rotor of our anet anet a8 stepper motor kit is made with introduced German craftsmanship and there is rotor rubber covering the rotor, effectively reduce the noise..
  • DURABLE & TOUGH: Our mini motor uses high hardness metal, tough and durable. And the matte texture in the side wall can increase friction..
  • WIDE APPLICATION: This small motors can be used in various area, such as stage lighting.
  • WHAT YOU GET: The package includes 1* 42 Stepper Motor..
Check Stock

Star-Art Front and Back Disc Brake Kit - Aluminum Alloy Calipers, 2 Pcs Stainless Steel 160 mm Rotors & Cable & Brake Lever & 12 Bolts, Freewheel Threaded Hubs Hole Distance of 48mm

  • Used for brake systems of ordinary bikes, mountain bikes and road bikes..
  • Freewheel Threaded Hubs, Hole distance of 48mm, an inner diameter of 34mm(approx).
  • Position: Front / Rear. F-160mm/R-140mm. F-180mm/R-160mm. ROTOR MOUNTING BOLTS are included.
  • Note: F160 Front Brake: (Also named F160/R140) If installed at front wheel, it fits 160mm rotor, but if installed at rear wheel, it fits 140mm rotor. R160 Rear Brake: (Also named F180/R160) If installed at front wheel, it fits 180mm rotor, but if installed at rear wheel, it fits 160mm rotor..
  • Package Content: Mechanical Bike 160mm Rotor Front and Back Brake Disc Kit x 1.
Check Stock

Italeri Models Bell UH-1B Huey Kit

  • Length: 105mm/ 4.1" Rotor diameter: 101mm,/ 4".
  • Model details: - new kit form - Detailed surfaces, recessed sheet metal joints - Cockpit with control stick, instrument panel and seats - Detailed engine cowlings - Movable main rotor - Stub wings with pylons - Missile containers and Hellfire missiles - Sensors and antennas as well as mast sights - Decals for the US Army and a Dutch version.
Check Stock

Heavy Duty 75" Rotary Tiller 3 Point Rototiller Tractor Tiller Attachment PTO Tiller Cultivator C Blade

  • 【A DECK MATERIAL】:Shaped and formed 5/32"16"8gauge. Heavyformed Q-235 (American standard ASTM A-36) structural steel plate. Forming allows for additional strength and rigidity..
  • 【SIDE PLATE MATERIAL】:5/16",32".heavy-235(American standard ASTM a-36) structural steel plate.
  • think steel to ensure the structural integrity of the unit during heavy use..
  • 【HITCH TYPE】:Standard3-pointhitch14.Orcategory1quick hitch. Clevis-type lower hitch makes attaching to your tractor a breeze..
  • 【ROTOR SHAFT SPEED】:540RPM PTOinputspeed=210RPM rotor shaft speed. The rotor speed is matched with the number of times to reach the ideal torque required to tear through the earth..
  • 【BLADE TYPE】:Self-sharpening C-shaped.Compared to L-shaped the shape is more efficient and requires less HP todigintothesoilThegradual C-shape is stronger than the sharp bend of the L-shaped blades..
Check Stock