Reviews Rotation Shaft

3pcs/Pack Brass Mini Ball Valve Shut Off Switch 1/4" NPT Male x 1/4 INCH NPT Female Rated to 600WOG for Water Air Compressor Etc

  • BRAND NEW TRUE 5HP COMPRESSOR DUTY MOTOR, 56HZ FRAME, 3450RPM, 7/8" SHAFT DIAMETER.
  • 22 FULL LOAD AMP AT 230V, THIS MOTOR NOT SUITED FOR INCOMING VOLTAGE LESS THAN 208V.
  • CCW (COUNTER CLOCKWISE) SHAFT ROTATION WHEN VIEWED FROM THE SHAFT END. SHAFT ROTATION IN NOT REVERSIBLE.
  • 2.25" SHAFT LENGTH, KEYED SHAFT, 60HZ, 1.0 SERVICE FACTOR.
  • WIRING INFO SHOWN ON NAMEPLATE, PROFESSIONAL INSTALLATION REQUIRED.
Check Stock

3007715/98001.175x25 Spline Gray

  • Low friction: The ball does not cycle and can achieve rolling motion with minimal friction..
  • High precision linear movement: as part of shaft and nut, the clearance in rotation direction can be adjusted to ensure accuracy..
  • Transferable rotating torque: the ball rolls on the ball groove of the spline shaft and moves in a straight line while transferring the rotating torque..
  • Compact design: even a single shaft mechanism can move in a straight line, while keeping the nut in the direction of rotation without deviation..
  • Large bearing capacity and long service life: Because the rolling surface adopts r-shaped ball groove matching with the ball diameter, the contact area is large, the bearing capacity is strong and the service life is long..
Check Stock

INDUSTRIAL SEWING MACHINE MOTORS HIGH SPEED CLUTCH MOTOR

  • Industrial High Speed Clutch Motor Watts: 400 Watts & 550 Watts available Power: 110 Volts Rotation: Bi-directional RPM: 3450 (High Speed Motor) Shaft: AMCO Shaft Weight: Approximately 42 Lbs Available Pulleys: 630, 632, 634 Hardware & Belt Cover included.
Check Stock

Witproton Ball Splines - Standard 8mmX300mm 1pc

  • Low friction: The ball does not cycle and can achieve rolling motion with minimal friction..
  • High precision linear movement: as part of shaft and nut, the clearance in rotation direction can be adjusted to ensure accuracy..
  • Transferable rotating torque: the ball rolls on the ball groove of the spline shaft and moves in a straight line while transferring the rotating torque..
  • Compact design: even a single shaft mechanism can move in a straight line, while keeping the nut in the direction of rotation without deviation..
  • Large bearing capacity and long service life: Because the rolling surface adopts r-shaped ball groove matching with the ball diameter, the contact area is large, the bearing capacity is strong and the service life is long..
Check Stock

Witproton Ball Splines - Both Ends Tapped 8mmX270mm 1pc

  • Low friction: The ball does not cycle and can achieve rolling motion with minimal friction..
  • High precision linear movement: as part of shaft and nut, the clearance in rotation direction can be adjusted to ensure accuracy..
  • Transferable rotating torque: the ball rolls on the ball groove of the spline shaft and moves in a straight line while transferring the rotating torque..
  • Compact design: even a single shaft mechanism can move in a straight line, while keeping the nut in the direction of rotation without deviation..
  • Large bearing capacity and long service life: Because the rolling surface adopts r-shaped ball groove matching with the ball diameter, the contact area is large, the bearing capacity is strong and the service life is long..
Check Stock

Witproton Ball Splines - One End Tapped 10mmX350mm 1pc

  • Low friction: The ball does not cycle and can achieve rolling motion with minimal friction..
  • High precision linear movement: as part of shaft and nut, the clearance in rotation direction can be adjusted to ensure accuracy..
  • Transferable rotating torque: the ball rolls on the ball groove of the spline shaft and moves in a straight line while transferring the rotating torque..
  • Compact design: even a single shaft mechanism can move in a straight line, while keeping the nut in the direction of rotation without deviation..
  • Large bearing capacity and long service life: Because the rolling surface adopts r-shaped ball groove matching with the ball diameter, the contact area is large, the bearing capacity is strong and the service life is long..
Check Stock

Nb Ball Spline Nut 13 mm Bore Dia x 36 mm L

  • Low friction: The ball does not cycle and can achieve rolling motion with minimal friction..
  • High precision linear movement: as part of shaft and nut, the clearance in rotation direction can be adjusted to ensure accuracy..
  • Transferable rotating torque: the ball rolls on the ball groove of the spline shaft and moves in a straight line while transferring the rotating torque..
  • Compact design: even a single shaft mechanism can move in a straight line, while keeping the nut in the direction of rotation without deviation..
  • Large bearing capacity and long service life: Because the rolling surface adopts r-shaped ball groove matching with the ball diameter, the contact area is large, the bearing capacity is strong and the service life is long..
Check Stock

Fasco D1160 3.3' Frame Shaded Pole Fasco Totally Enclosed OEM Replacement Motor with Sleeve Bearing, 1/100HP, 1480rpm, 115V, 60 Hz, 0.58amps

  • OEM replacement motor with sleeve bearing.
  • Shaft measures 5/16" diameter by 1-1/2" length.
  • 115 Volts, 1480 RPM, 0.58 Amps, 1/110 HP, Rotation: CWSE.
  • Shaded Pole, "A" Dimension: 2 1/8-Inch, Shaft Dimension: 5/16 by 1 1/2-Inch.
  • Replaces 7163-2593, 7163-9678, 663, 668, 763, 768, 661.
Check Stock

Witproton Ball Splines with Both Ends Stepped and Tapped 13mmX250mm 1pc

  • Low friction: The ball does not cycle and can achieve rolling motion with minimal friction..
  • High precision linear movement: as part of shaft and nut, the clearance in rotation direction can be adjusted to ensure accuracy..
  • Transferable rotating torque: the ball rolls on the ball groove of the spline shaft and moves in a straight line while transferring the rotating torque..
  • Compact design: even a single shaft mechanism can move in a straight line, while keeping the nut in the direction of rotation without deviation..
  • Large bearing capacity and long service life: Because the rolling surface adopts r-shaped ball groove matching with the ball diameter, the contact area is large, the bearing capacity is strong and the service life is long..
Check Stock

Lomanco Power Vent Motor Replacement F0510B2944

  • 5" Diameter Motor - Shaft: 1/2" Diameter x 1.75" with Flat on Shaft.
Check Stock

DC Moter, DC12V Adjustable Speed DC Motor 180W Permanent Magnet DC Motor 2000RPM with Bracket (DC 12V 2000RPM)

  • [Excellent performance]: Permanent magnet DC motor drive is super stable, low noise, safe to use and stable in operation..
  • [Optional specifications]: Permanent magnet DC motors are available in two specifications, the rated voltage is optional 12/24 (V), with a high speed of 3500/6000rpm and a larger torque..
  • [Support CW / CCW rotation]: This high-speed DC motor can support CW / CCW rotation, and the speed is adjustable..
  • [Hollow shaft design]: The DC motor adopts a hollow shaft design. The fishing line can pass through the hollow shaft, which is very suitable for floating fish..
  • [Wide application]: This DC motor can be widely used in lawn mowers, polishers, cutting machines, electric drills, cotton candy machines, small generators, winding machines, bag cutting machines.
Check Stock

Pool Pump Motor, 1-1/2 HP, 3450, 115/230V

  • Price For: Each Hz: 60 Motor Shaft Rotation: CCWSE Phase: 1 Motor Sub Application: Pool and Spa Pump Motor Application: Pump Motor Enclosure Design: Open Dripproof Motor Thermal Protection: Auto Standards: UL Recognized (E25022/46412), CSA Certified (LR43341), UL 1081, 1563, 1795 Approvable Voltage Compatibility: 115, 120, 230, 240, 115/230, 120/240 Shaft: Threaded 3/8-16 UNC-2A.
  • Voltage: 115/230 Shaft Material: Stainless Steel Shaft Length: 1-13/16" Nameplate RPM: 3450 Motor Mounting Type: Rigid Base Item: Pool and Spa Pump Motor Motor Design: Capacitor-Start HP: 1-1/2 Ins. Class: B Shaft Dia.: 1/2" Full Load Amps: 16.0/8.0 Finish: Black Motor Service Factor: 1.00 Motor Bearings: Ball Frame: 48Y Country of Origin (subject to change): Mexico.
Check Stock

Broan Heater Replacement Vent Fan Motor # 97010254, .9 amps, 3200 RPM, 120 volts

  • Exact replacement motor for: 15353, 04J2063, J238-075-7151, P15353, SX17549.
Check Stock