Reviews Rotary Drum Dryers

303373K Roller Wheel Drum Support Kit for Maytag & Admiral Dryers by PartsBroz - Replaces Part Numbers 12001541, AP4008534, 12001541VP, 3-3373, 303373, DE693, PS1570070, Y303373 (Pack of 2)

  • ✅ PART NUMBER 303373K: It directly replaces part numbers 303373K, 12001541, AP4008534, 12001541VP, 3-3373, 303373, 400518, AH1570070, DE693, EA1570070, K35-248, PS1570070, W10116741, and Y303373..
  • ✅ FOR ADMIRAL & MAYTAG: The kit fits hundreds of Maytag dryers and several Admiral dryers. Reach out to us with any questions about compatibility with your appliance..
  • ✅ FIXES NOISY DRYERS: These parts support the dryer drum as it spins. When a bearing goes bad on a roller, it can damage the shaft and cause an unpleasant squeaky or rumbling noise. Disassemble your dryer to determine how many have gone bad and need replaced. This complete kit gives you everything you need to replace two drum supports..
  • ✅ DIY REPAIR: Replacing two drum support rollers and shafts by yourself takes one to two hours depending on your experience. Following along with a video online makes the process easy. You’ll just need a 5/16 nut driver, Phillips screwdriver, a 9/16 wrench, and snap ring pliers and/or a small flathead screwdriver..
  • ✅ HIGH-QUALITY KIT: The kit includes two drum supports, two shafts, two fiber washers, two nuts, two C clips, and two spring washers. Both drum supports feature a thick plastic construction with a reinforced metal shaft for added du....
Check Stock

TEMO 100 pc 1/2 Inch Sand Drum Grit 60 Coarse with 2 pc 1/8 Inch Mandrel Compatible for Dremel Rotary Tools

  • 100 PC 1/2" (12.7mm) sand drum with 2 Mandrel Compatible for dremel grit 60 coarse.
  • 100 piece 1/2" (12.7mm) 60 Grit, 1/2" (12.7mm) Diameter.
  • 2 piece 1/2" (12.7mm) X 1/2" (12.7mm) Rubber Mandrels.
  • 1/8" (3.175mm) shank size (Compatible for Dremel and other Rotary Tools).
  • Here are our best practices for using sand drums. 1. Adjusting the screw at the top of the mandrel will loosen or tighten the sand drum. Make sure the sand drum is held tight to the mandrel before use. 2. During use, periodically power down the rotary tool to check the sand drum. Ensure that there is sufficient grit remaining on the band before continuing..
  • 3. Rotary tools can operate at very high RPM. High RPM with a small tool such as a sanding drum produces a lot of friction and heat build up. Ensure that your sand drum and mandrel is not getting too hot. Consider using medium speed and alternating mandrels as you change sand drums out to reduce heat build up.003cbr003e4. Rotary tools are power tools. Always consider appropriate eyewear and other PPE to suit your task..
  • US-BASED CUSTOMER SERVICE: Available by chat, email, phone, or visit us at our customer service center in La Crosse, WI..
Check Stock

TEMO 100 pc 1/4 Inch Sand Drum Grit 60 Coarse with 2 pc 1/8 Inch Mandrel Compatible for Dremel Rotary Tools

  • 100 PC 1/4" (6.35mm) sand drum with 2 Mandrel Compatible for dremel grit 60 coarse.
  • 100 piece 1/4" (6.35mm) 60 Grit, 1/4" (6.35mm) Diameter.
  • 2 piece 1/4" (6.35mm) X 1/2" (12.7mm) Rubber Mandrels.
  • 1/8" (3.175mm) shank size (Compatible for Dremel and other Rotary Tools).
  • Here are our best practices for using sand drums. 1. Adjusting the screw at the top of the mandrel will loosen or tighten the sand drum. Make sure the sand drum is held tight to the mandrel before use. 2. During use, periodically power down the rotary tool to check the sand drum. Ensure that there is sufficient grit remaining on the band before continuing..
  • 3. Rotary tools can operate at very high RPM. High RPM with a small tool such as a sanding drum produces a lot of friction and heat build up. Ensure that your sand drum and mandrel is not getting too hot. Consider using medium speed and alternating mandrels as you change sand drums out to reduce heat build up.003cbr003e4. Rotary tools are power tools. Always consider appropriate eyewear and other PPE to suit your task..
  • US-BASED CUSTOMER SERVICE: Available by chat, email, phone, or visit us at our customer service center in La Crosse, WI..
Check Stock

Coceca 458pcs Sanding Drums for Drum Sander, Kit with 432pcs Sanding Band Sleeves 24pcs Drum Mandrels 2pcs Self-Tightening Drill Chuck

  • Package contains: 458 pieces of rotary sanding bands, 24 packs of rotary sanding drum mandrels and 2 packs of self-tightening drill chuck..
  • 6 grits accessories: six types of sanding drum grits, 80 grit, 120 grit, 240 grit, 320 grit, 400 grit and 600 grit..
  • Size: three sizes of sanding drum sleeves, 1/2 inch, 3/8 inch and 1/4 inch..
  • Wide application: this rotary tool sanding accessories set would meet almost all your requirements in nut-carving, metal, wood, plastic, jade, circuit board and other DIY processing..
  • Easy to use: just need to slide the sanding drums into the drum sander, make sure the drum has been screwed tightly, you can directly start your project..
Check Stock

WP3387747 Dryer Heater Heating Element for Whirlpool Kenmore AP6008281

  • ...40 Volts and has 2 5/16″ terminals..
  • Designed to fit specific Whirlpool manufactured dryer models including Amana, Jenn Air, Kenmore, Magic Chef, and Maytag , Compatible With Part # 3387747, 80003, 8527865, 279769, AP2947033, AP6008281 & PS344597, PS117414..
  • This heating element fits many Whirlpool-built dryers under the brand names of Whirlpool, Whirlpool Gold, Kenmore, Kenmore Elite, Catalyst, Duet, Duet HT, KitchenAid, KitchenAid Ensemble, among others. It typically fits dryers which have a 27″ cabinet (measured side to side) and/or which have the lint filter located on the inside of the dryer door (as opposed to the top of the cabinet). Fits Kenmore 90-series dryers..
  • Dryers pull air from outside the unit and blow it through a coiled wire heating element into the dryer drum. As the drum spins, hot air regulated by a thermostat passes over, under, and around wet clothes to dry them. A dryer that tumbles the clothes while blowing cool air could have a damaged heating element that needs replacing..
  • When this part fails, you may experience the following symptoms: Electric Dryer No Heat ,How to test: Measure for continuity, replace if open..
Check Stock

8536974 (4-Pack) Drum Support Roller for Whirlpool Dryers by PartsBroz - Replaces WPW10314173, AP6019303, W10314173, W10314171, 3388342, 3389902, 3396801, 3396802, 3401846, 8536973, PS11752609

  • ✅ PART NUMBER 8536974: This 4 pack of drum support rollers is a high-quality exact equivalent to part numbers WPW10314173, AP6019303, W10314173, W10314171, 3388342, 3389902, 3396801, 3396802, 3401846, 8536973, 8536974, PS11752609, W10756057, and WPW10314173VP..
  • ✅ FOR WHIRLPOOL DRYERS: Use it to repair your Whirlpool manufactured dryer. Compatible brands include Whirlpool, Kenmore/Sears, KitchenAid, Maytag, and Amana. Refer to your owner’s manual or reach out to us with any questions about compatibility..
  • ✅ FIXES NOISY DRYERS: Does your dryer make a lot of noise? If so, you likely have one or more broken drum support rollers. With this kit, you can replace up to four drum support rollers..
  • ✅ DIY REPAIR: It takes 1 to 2 hours to replace broken dryer drum support rollers. Along with this part, you’ll need a 1/4-inch nut driver and a small flathead screwdriver to complete the repair..
  • ✅ HIGH-QUALITY PART: This high-quality exact replacement part features a durable construction with a reliable metal shaft. Each roller meets or exceeds all original manufacturer specifications for fit and performance. Package includes 4 identical drum support rollers..
Check Stock

341241 Dryer Drum Belt for Whirlpool & Kenmore by PartsBroz - Replaces Part Numbers AP2946843, W10127457, FSP341241, 8066065, and 694088

  • ✅ PART NUMBER 341241: Our 341241 dryer drum belt replaces part numbers 14210003, 31001026, 31531589, 3389628, 3392665, 3394651, 3399844, 345473, 349533, 53-0186, 53-1080, and more..
  • ✅ BRAND NAME COMPATIBILITY: It’s a direct fit for several Whirlpool, Roper, Admiral, Maytag, Hardwick, Jenn-Air, Estate, Crosley, Inglis, Norge, Amana, Kenmore, KitchenAid, and Ikea brand dryers..
  • ✅ FIXES COMMON PROBLEMS: Get your dryer back. Drum belt replacement can fix noisy dryers or dryers that fail to tumble, heat up, or start..
  • ✅ EASY TO INSTALL: Hiring a professional just isn’t worth it. For this appliance repair, you only need a few tools and 10-15 minutes of your time..
  • ✅ HIGH QUALITY PART: This flat rubber belt features four ribs and three grooves for added traction and performance. It measures approximately 0.25W by 92.25L inches..
Check Stock

Woohome 574 PCS Sanding Drum and Sleeve Set Spindle Sanding Including 540 PCS Sanding Band Sleeves, 30 PCS Drum Mandrels, Wrench for Dremel Rotary Tool

  • Package include: 540 PCS of rotary sanding bands, 30 PCS rotary sanding drum mandrels, 3 PCS of self-tightening drill chuck, 1 PCS small wrench..
  • 6 Grits rotary sanding bands: 80 grit, 120 grit, 240 grit, 320 grit, 400 grit and 600 grit, 6 grits in 3 size, each size 30PCS..
  • Sanding drum mandrels: diameter is 1/2 inch, 3/8 inch and 1/4 inch, 2 size thickness, each size 5 PCS (size as the picture shows).
  • Easy to use: just need to slide the sanding drums into the drum sander, make sure the drum has been screwed tightly, you can directly start your project..
  • Wide application: Application to electric grinding,handing mill,mind mill polishing grinding the metal and wood, jade, emerald, glass, agate..
Check Stock

Techecook 4392065 Dryer Repair Kit with 349241T Drum Roller Kit,691366 Idler Pulley and 341241 Belt - Replacement for whirl.pool & ken.more Dryers - Replaces 587636 AP3098345 AP6010582 WP691366

  • ✅【 4392065 DRYER REPAIR KIT】4392065 Dryer Maintenance Kit for 29 wide dryers with the lint filter located on the top of the dryer. 691366 Dryer Idler Pulley keeps tension on the dryer drum belt. Ken-more 8066065 Dryer Belt 341241 is 92 1/4" long, 1/4" wide, 4 ribs, 3 grooves. Replaces some wider 5 rib belts. Drum support roller kit 349241T holds the drum in place while the drum rotates on the support wheels.‎ Each one has been strict testing by manufacturer before leaving the factory.
  • ✅【PACKAGE INCLUDES】4392065 29'' Dryer Repair Kit includes 1 x 691366 dryer Idler pulley,1 x 341241 whirl-pool dryer drum belt , 2 x 349241T dryer drum Rollers, 4 x tri-rings, 2 x clips. ✅4392065 dryer repair kit for whirl-pool is made of Metal and ABS prevents cracking and failing during the installation and use process , quality equal to OEM requirements..
  • ✅ 【365-DAYS WARRANTY】During the warranty period, if the 4392065 Dryer Repair Kit for whirlpool has quality problem or other reasons, we support return, replacement or refund. Customer’s satisfaction is our unremitting pursuit. If you are not satisfied with the ad-miral dryer repair kit , please contact us immediately. Everything fit as it should, and was fairly easy to replace.
Check Stock

4392067 Dryer Repair Kit for 27-in. Whirlpool Dryers by PartsBroz - Replaces Part Numbers AP3109602, 2015, 4392067VP, 587637, 80047, AH373088, EA373088 & PS373088

  • ...587637, 80047, AH373088, EA373088, AP3109602, and PS373088..
  • ✅ REPLACES ALL WEARABLE PARTS: Use the dryer kit to replace all the wearable parts in your clothes dryer. The complete kit includes a drum belt, 4 drum support rollers, an idler pulley, 9 tri-rings, 1 washer, and an instruction sheet..
  • ✅ FOR WHIRLPOOL DRYERS: The kit is compatible with several 27-inch-wide Whirlpool manufactured dryers and thin twin laundry centers. Compatible brands include Kenmore/Sears, Maytag, KitchenAid, and Amana. Reach out to us to confirm compatibility with your appliance..
  • ✅ EASY DIY FIX: Replacing all the wearable parts in your dryer takes about one to two hours. It’s an easy repair if you follow along with a repair video. Helpful tools include a quarter-inch hex head nut driver, a small flathead screwdriver, and work gloves..
  • ✅ HIGH-QUALITY DESIGN: This high-quality kit meets all original manufacturer specifications for fit and performance. Please note that the drum belt does not fit all compatible dryer models. Compare the specific belt used in your appliance against this kit’s drum belt. Drum belt specs: 93.5L x 0.25W in. with 4 ribs..
Check Stock

Samfox 20pcs Spindle Sanding Drum Sander Tool Kit Set with Case for Drill Press

  • ..., polish jade and other art materials, or contour irregular shapes into your projects with the 20 Piece Drill Press Sanding Drum Kit.
  • Use these drum sanders for woodworking and metalworking.
  • All pieces are packaged in a plastic blow-molded case for convenient storage, safe travel, and easy organization.
  • PERFECT SIZE ROTARY SANDING DRUMS FOR YOUR NEEDS: This drill press drum sander kit includes 4 reusable barrel sander arbor drum sander bit attachments that can fit your tools.
  • Each sanding bit provides a different diameter to meet your needs..
  • FITS YOUR TOOLS: Ideal for use with your rotary tools such as drill presses, spindle sanders, hand drills, or flexible shaft attachments.
  • Easily screw the shank of one of the sanding drill bit attachments into your tool then slip the correct sized sanding band over the mandrel and begin using your tool.
  • REPLACEMENT SANDING SLEEVES: Not only does this drill sander kit include 4 reusable rotary tool sanding drums, but it also includes 4 replacement sandpaper bands for each size mandrel for a total of 16 sanding bands.
  • Each size features two 80 and two 120 sand paper grits to meet your needs.
  • BUILT TO LAST: The 4 drill sanding attachment bits are designed for strength, and longevity.
Check Stock

162pcs Sanding Drum Kit, Sanding Bands Sleeves for Drum Sander with Drum Mandrels for Rotary Tool

  • ...lish jade and other art materials, or contour irregular shapes into your projects with the ABN 20 Piece Drill Press Sanding Drum Kit.
  • Use these drum sanders for woodworking and metalworking.
  • All pieces are packaged in a plastic blow-molded case for convenient storage, safe travel, and easy organization.
  • PERFECT SIZE ROTARY SANDING DRUMS FOR YOUR NEEDS: This drill press drum sander kit includes 4 reusable barrel sander arbor drum sander bit attachments that can fit your tools.
  • Each sanding bit provides a different diameter to meet your needs: 1/2-inch, 3/4-inch, 1-inch, and 1-1/2 inch (1.27 cm, 1.9 cm, 2.54, and 3.8 cm).
  • FITS YOUR TOOLS: Each drill drum sander attachment bit features a 1-inch (2.54 cm) long steel shank that fits your 1/4-inch (.64 cm) tools.
  • Ideal for use with your rotary tools such as drill presses, spindle sanders, hand drills, or flexible shaft attachments.
  • Easily screw the shank of one of the sanding drill bit attachments into your tool then slip the correct sized sanding band over the mandrel and begin using your tool.
  • REPLACEMENT SANDING SLEEVES: Not only does this drill sander kit include 4 reusable rotary tool sanding drums, but it also includes 4 replacement sandpaper bands for each size mandrel for a total of 16 sanding bands.
Check Stock

MAYITOP 2PCS W10314173 Dryer Drum Support Roller for Whirlpool, Kenmore, Maytag, KitchenAid 3401846, 8536973, 8536974

  • This is a drum support roller for a dryer. Most dryers require two drum rollers. It is recommended to check and replace both drum support rollers at the same time to ensure proper drum rotation and because they often wear at the same rate. The drum support roller holds the drum in the proper position while it spins on the support wheels. If rollers are worn out, they will cause the dryer to be noisy..
  • This part works with the following brands: Whirlpool, Kenmore, Maytag, KitchenAid, Amana, Crosley, Inglis.
  • This part works with the following products: Dryer, Washer Dryer Combo.
  • Part Number WPW10314173 replaces: 3388342, 3389902, 3396801, 3396802, 3401846, 8536973, 8536974, W10314171, W10314173, W10756057, WPW10314173VP..
  • This part fixes the following symptoms: Noisy.
Check Stock