Reviews Room Temperature Cure

West System 209-SB Extra Slow Hardener

  • 209 EXTRA SLOW HARDENER is a low-viscosity epoxy curing agent. It is useful in a majority of hot-weather bonding situations, and when very long working time and cure time are needed. 209 Extra Slow Hardener produces a slow epoxy cure that develops physical properties gradually at room temperature. It yields a rigid, high-strength moisture-vapor resistant and functionally waterproof solid..
  • USE WITH WEST SYSTEM 105 RESIN for general coating and bonding applications in extremely warm and/or humid conditions, and for extended working time at room temperature. Forms a clear, amber-colored solid with good physical properties and moisture resistance for bonding and coating applications..
  • PROVIDES ABOUT TWICE the working time of 206 Slow Hardener. 209's pot life at 72°F (22°C) is 40 to 50 minutes. Pot life at 95°F (35°C) is 15 to 20 minutes. Cures to a solid state at 72°F (22°C) in 20 to 24 hours. Cure to a solid state at 95°F (35°C) in 6 to 8 hours. Reaches maximum strength at 72°F in 4 to 9 days Minimum recommended working temperature is 70°F (21°C)..
  • PAIR WITH WEST SYSTEM 105-B Epoxy Resin. Blend with with WEST SYSTEM 105 Epoxy Resin at a 3-parts resin to 1-part hardener ratio..
  • EASILY MODIFIED with WEST SYSTEM Fillers, Additives, and Pigments to ....
Check Stock

Electrically Conductive Epoxy, Carbon Filled Adhesive, Room Temperature Cure, AA-CARB 61, 10gm kit

  • Spec. Gravity 1.35 g/cc Compressive Strength, psi 13,000 Pot Life 30 minutes Appearance Black.
  • Mechanical Properties Hardness, Shore D 85.
  • Vol Resistivity ohm. cm 003c 40 Operating Temp -50 to 145 °C Mix Ratio/weight 100:10 / Resin:Hardener.
  • Cure Time 24hrs At 25°C, 1 hr At 60°C , 15 minutes At 100°C.
Check Stock

MG Chemicals 9410 1-Part Electrically Conductive Adhesive with unlimited working time till it is HEAT-CURED. High TG, 3mL Dispenser

  • Heat Cure only. Minimum cure temperature of 90 °C [194 °F].
  • Shelf life: up to 4 months at room temperature. Frozen = 1 year.
Check Stock

MG Chemicals 8330S Silver Epoxy Adhesive, Extreme Conductivity, 4 hr. Working time, 21 g, 2 Dispeners (8330S-21G)

  • Excellent 0.0007 Ω·cm electrical resistivity and 2.4 W/(m·K) thermal conductivity.
  • Easy 1:1 mix ratio and long working time may be mixed once and then used as a 1-part epoxy for a four hour production shift.
  • Heat Cure is Required. Cure temperature of only 65 °C for 2 hours —lower than most 1-part epoxies and suitable for use on heat sensitive components..
  • Very long shelf life of at least two years even when stored at room temperature.
  • Strong water and chemical resistance to brine, acids, bases, and aliphatic hydrocarbons.
Check Stock

LET'S RESIN Silicone Mold Making Kit 15A,Flexible Silicone Rubber Mold Making 2.2lb,Fast Cure Molding Silicone, Self-Degassing Platinum Cure Liquid Silicone, Ideal for DIY Resin Molds & Silicone Molds

  • ...lue color.You can easily see whether part A and part B are mixed evenly thanks to the bicolor appearance.
  • The mix ratio is 1:1 by weight. Just pour the equal Part A and Part B together, then stir the silicone rubber mixture for 3 minutes.
  • the working time is within 30 minutes and the cure time is 3~ 6 hours at room temperature.Final curing time varies on various conditions..
  • 【SELF-DEGASSING & NO BUBBLES】: No vacuum machine is necessary! The bubbles of liquid silicone will automatically disappear within 2 hours at room temperature due to its low viscosity feature. Bubbles tend to occur in hot temperatures. To reduce all micro-bubbles, you can seal and store the mixed molding silicone in the refrigerator for 1 hour while curing, then continues to cure at room temperature..
  • 【WIDE RANGE OF USE & LONG LIFE SPAN】: LET'S RESIN high-performance silicone for mold making is very ideal for art craft use, easily make your own resin molds, including resin jewelry molds, resin coaster molds, large silicone molds, 3D silicone molds as well as concrete molds, cement molds, soap molds, candle molds, plaster molds, clay molds, etc.
Check Stock

OOMOO 30-1A 1B Mix by Volume Tin Cure Silicone Rubber - Pint Unit

  • For The Novice Mold Maker - OOMOO silicones do not have great tear strength..
  • No Vacuuming – No Scale – Easy To Use . . . OOMOO 25 is an easy to use tin cure silicone rubber compound that features a convenient one-to-one by....
  • It has a low viscosity for easy mixing and pouring . . . vacuum degassing is not necessary..
  • This product cures at room temperature with negligible shrinkage. OOMOO 25 has a 15-minute pot life and 75-minute cure time..
Check Stock

Mold Star 15 SLOW - 1A:1B Mix By Volume Platinum Silicone Rubber - Pint Unit

  • Tear Resistant - Mold Star silicones cure to soft, strong rubbers which are tear resistant and exhibit very low long term shrinkage *Packaging may vary*.
  • Heat Resistant - Cured Mold Star rubber is heat resistant up to 450°F (232°C) and is suitable for casting low-temperature melt metal alloys.
  • Curing - Allow Mold Star 15 SLOW silicone rubber to cure for 4 hours at room temperature (73°F/23°C) before demolding..
  • Vacuum Degassing - Although not necessary, vacuum degassing helps eliminate any entrapped air in pourable silicone rubber.
  • Mold Performance - The physical life of the mold depends on how you use it (materials cast, frequency, etc.). Casting abrasive materials such as concrete can quickly erode mold detail, while casting non-abrasive materials (wax) will not affect mold detail. Before storing, the mold should be cleaned with a soap solution and wiped fully dry. Two part (or more) molds should be assembled. Molds should be stored on a level surface in a cool, dry environment.
Check Stock

TotalBoat Table Top Epoxy Resin 1 Gallon Kit - Crystal Clear Coating and Casting Resin for Bar Tops, Table Tops, Wood, Concrete, Epoxy Art & Crafts

  • SUPER CLEAR EPOXY RESIN for a clear, high gloss finish on bar tops, table tops & countertops.
  • add pigments, tints or encapsulations to make your piece truly unique.
  • versatile craft resin is also great for coating tumblers and casting coasters & jewelry.
  • EPOXY RESISTS SCRATCHES, STAINS AND YELLOWING: Self-leveling formula cures to a finish as smooth as glass.
  • use this versatile DIY resin on wood, concrete, ceramic, stainless steel and more.
  • 2 PART EPOXY IS EASY TO USE: Just mix 1 part resin to 1 part hardener, stir thoroughly, and pour on your prepared surface.
  • the epoxy will level on its own and cure at room temperature.
  • maximum pour depth per layer is 1/8" - 1/4".
  • NO VOCs, LOW ODOR, BPA-FREE: No harsh fumes - ideal for indoor or shop use with adequate ventilation and proper PPE.
  • all ingredients in this food safe epoxy resin are on the USDA approved list for contact with food, once cured.
  • 1 GALLON EPOXY KIT includes 1/2 gallon of resin & 1/2 gallon of hardener.
Check Stock

TotalBoat Table Top Epoxy Resin 2 Gallon Kit - Crystal Clear Coating and Casting Resin for Bar Tops, Table Tops, Wood, Concrete, Epoxy Art & Crafts

  • SUPER CLEAR EPOXY RESIN for a clear, high gloss finish on bar tops, table tops & countertops.
  • add pigments, tints or encapsulations to make your piece truly unique.
  • versatile craft resin is also great for coating tumblers and casting coasters & jewelry.
  • EPOXY RESISTS SCRATCHES, STAINS AND YELLOWING: Self-leveling formula cures to a finish as smooth as glass.
  • use this versatile DIY resin on wood, concrete, ceramic, stainless steel and more.
  • 2 PART EPOXY IS EASY TO USE: Just mix 1 part resin to 1 part hardener, stir thoroughly, and pour on your prepared surface.
  • the epoxy will level on its own and cure at room temperature.
  • maximum pour depth per layer is 1/8" - 1/4".
  • NO VOCs, LOW ODOR, BPA-FREE: No harsh fumes - ideal for indoor or shop use with adequate ventilation and proper PPE.
  • all ingredients in this food safe epoxy resin are on the USDA approved list for contact with food, once cured.
  • 2 GALLON EPOXY KIT includes 1 gallon of resin & 1 gallon of hardener.
  • coverage: 12.8 sq ft per gallon at 1/8" thick.
Check Stock

Permatex 82099 Spray Sealant, 12 oz.

  • J-B Weld Exhaustweld: A High Strength Fiberglass Wrap, Impregnated With A Specially Formulated Resin For High Temperature Resistant Repairs. Exhaustweld Can Resist Up To 1100°F Once It Is Fully Cured.
  • Cure And Set Time: Exhaustweld Can Cure With Or Without Heat! It Will Cure Within 20 Minutes If Heat Is Applied To It With Either A Heat Gun Or By Letting The Engine Run. Without Heat, Exhaustweld Will Set In 20 Minutes And Cure In 2 Hours.
  • High Heat Resistance: Once Fully Cured, J-B Weld Exhaustweld Exhaust System Repair Wrap Has A Temperature Resistance Of 1100°F, Allowing It To Be Used On Every Part Of The Exhaust System.
  • Applications: Manifolds, Catalytic Converters, Mufflers, Tailpipes And More.
Check Stock

MoldMaking & Casting Pourable Silicone Starter Kit

  • WHAT YOU NEED: Looking for a fun and creative activity that will get you out of that day to day routine? Do you enjoy making different DIY or art....
  • PERFECT MIX RATIO: This silicone mold making kit includes 2 easy to use silicone rubber compounds with a practical one-to-one ratio by volume mix,....
  • LOW VISCOSITY: You can easily mix and pour this rubber compound, creating one-block or two-block pieces or replicas with no vacuum degassing required.....
  • IDEAL FOR HOME AND INDUSTRIAL USE: Whether you’re buying this creative silicone mold set for DIY, homemade art projects such as sculpture or....
  • FAST POT LIFT AND CURE TIME: It takes no more than 30 minutes for this compound to cure at room temperature, with no noticeable shrinkage, and a....
Check Stock

TotalBoat Table Top Epoxy Resin 2 Quart Kit - Crystal Clear Coating and Casting Resin for Bar Tops, Table Tops, Wood, Concrete, Epoxy Art & Crafts

  • ... versatile DIY resin on wood, concrete, ceramic, stainless steel and more.
  • 2 PART EPOXY IS EASY TO USE: Just mix 1 part resin to 1 part hardener, stir thoroughly, and pour on your prepared surface.
  • the epoxy will level on its own and cure at room temperature.
  • maximum pour depth per layer is 1/8" - 1/4".
  • NO VOCs, LOW ODOR, BPA-FREE: No harsh fumes - ideal for indoor or shop use with adequate ventilation and proper PPE.
  • all ingredients in this food safe epoxy resin are on the USDA approved list for contact with food, once cured.
  • 2 QUART EPOXY KIT includes 1 quart of resin & 1 quart of hardener.
Check Stock

TotalBoat Table Top Epoxy Resin 4 Gallon Kit - Crystal Clear Coating and Casting Resin for Bar Tops, Table Tops, Wood, Concrete, Epoxy Art & Crafts

  • ... versatile DIY resin on wood, concrete, ceramic, stainless steel and more.
  • 2 PART EPOXY IS EASY TO USE: Just mix 1 part resin to 1 part hardener, stir thoroughly, and pour on your prepared surface.
  • the epoxy will level on its own and cure at room temperature.
  • maximum pour depth per layer is 1/8" - 1/4".
  • NO VOCs, LOW ODOR, BPA-FREE: No harsh fumes - ideal for indoor or shop use with adequate ventilation and proper PPE.
  • all ingredients in this food safe epoxy resin are on the USDA approved list for contact with food, once cured.
  • 4 GALLON EPOXY KIT includes two gallons of resin & two gallons of hardener.
  • coverage: 12.8 sq ft per gallon at 1/8" thick.
Check Stock