Reviews Roofing Series

(One Piece ) Cable Staple- Staples Cable 9/16 From Stanley Hand Tools (Part Number CT109T)

• For heavy duty stapling jobs such as insulation, carpet under laying and roofing felt.
• Color-coded packaging makes size and product selection a cinch.
• Sturdy plastic packaging reduces staple breakage.
• Heavy Duty ¿ Narrow Crown ¿ fits TR100, TR200, TRE500 series, PHT150, PHT250 and Arrow T-50.

National Nail 135055 250CT 1-Inch Plastic Cap Nail

• Deformed ring shank for greater holding power electro galvanized to enhance corrosion resistance. Conforms to surfaces..
• All hand driven caps are packaged as integral nail-cap units Cap nails round plastic burron cap ring shank lgth 1 inch count=250..
• Flexible round head conforms to surface making it difficult for water to get under the cap. use to secure roofing felt, sheathing, building papers, etc..
• Can be used for roofing felt, sheathing, polyethylene, roll roofing, re-roofing, chicken wire, wire lathe. Flexible plastic head..
• Flexible round head conforms to surface making it difficult for water to get under the cap. Can be used for roofing felt, sheathing, polyethylene, roll roofing, re-roofing, chicken wire, wire lathe..

PORTER-CABLE 15 Degree Coil Roofing Nailer

AMES RESEARCH LABORATORIES MSS1 Maximum Stretch Roof Coating, 1 Gallon, White

• Ames Maximum-Stretch is a white, elastomeric, acrylic, rubberized roof coating & sealant with 650% elongation to resist cracking & peeling. With 88% light reflectivity, the bright white finish reduces surface temperatures resulting in lowered cooling costs..
• Ames Maximum-Stretch adheres to metal roofing, tar, rolled roofs and more. Use as a RV roof sealant, waterproof sealant, rubber roofing material and more. Designed for low-slope roof maintenance..
• 650% elongation – does not flake, chip or peel – elastomeric and rubberized coating and sealant. Rubber roofing material is 88% light reflective resulting in lowered cooling costs. Brush, roll or spray on!.
• Non-toxic, eco-friendly, low VOC & made in the USA.
• 1 Gallon – Our waterproof roof sealant is packaged in 1 gallon Pail. Designed for low-slope roof maintenance on metal roofing, built-up roofing, rolled roofing and more..

#8 x 1/2\ Stainless Philips Pan Head Sheetmetal Screw (1/2\ to 2\ Lengths in Listing) 100 Sheet Metal Screws (#8 x 1/2 Inch)

• Dimensions: 5/16" Hex Head and ~9/16" EPDM washer - Shaft is .242" (#14) - Length under head 1".
• #14 Sheet Metal roofing screws are galvanized for corrosion resistance.
• Sharp T17 type point securely fastens metal roofing to wood structures quickly and easily.
• For installing roofing on a house, porch, airplane hangar, shed, pole barn, shop, barn or lean-to.
• Rough Estimation - regular roofing project should require 80 screws per 10 x 10 section of roofing.

CREWTOWER Roofing Nail Gun, 15 Degree 3/4-inch to 1-3/4-inch Pneumatic Roofing Nailer, Heavy Duty Coil Roofing Nailer for Asphalt Fiberglass Shingles Lath Wire Fasterening Wooden Box Assembly

• [Professional Nail Gun]: This roofing tool is made not only to get your work done, but also as a loyal servant to your beautiful life and dreams. This roofing nail gun is the right tool to assist you achieve those goals..
• [Easy to Use]: With easy-to-load magazine, this roofing nailer is easy to load coil roofing nails. The quick-release nosepiece makes it easy to clear jams. Simply turning a wheel, you can adjust the nailing depth, and interchangeable trigger to switch firing mode..
• [Powerful and Efficient]: This powerful air nailer is made of industrial-grade parts, firing engine provides quick response. Comfortable rubber handle and well balanced siding nailer gun body reduces fatigue for long time jobs. Large capacity magazine improves working efficency by minimizing replenishment time..
• [Wide Applications]: This heavy duty coil roofing nailer is ideal for fasterning asphalt and fiberglass shingle, fasterning lath wire on plywood, siding installation and wooden box assembly..
• [Tool Specifications]: The pneumatic coil roofing nail gun weighs only 5.67lbs with aluminium body, load capacity 120 nails, drives 15 degree wire welded coil roofing nails, nail length 3/4" to 1-3/4", shank diameter 0.12", air-powered, operating pressure 70-120PSI..

Ames Maximum Stretch - 4.6 Gallon Waterproof Sealant Membrane - Perfect For Roofing, Repairs, Concrete, EPDM & Wood - Liquid Rubber Sealer - Up To 650% Elastic - Made in USA

• Ames Maximum-Stretch is a white, elastomeric, acrylic, rubberized roof coating & sealant with 650% elongation to resist cracking & peeling. With 88% light reflectivity, the bright white finish reduces surface temperatures resulting in lowered cooling costs..
• Ames Maximum-Stretch adheres to metal roofing, tar, rolled roofs and more. Use as a RV roof sealant, waterproof sealant, rubber roofing material and more. Designed for low-slope roof maintenance..
• 650% elongation - does not flake, chip or peel - elastomeric and rubberized coating and sealant. Rubber roofing material is 88% light reflective resulting in lowered cooling costs. Brush, roll or spray on!.
• Non-toxic, eco-friendly, low VOC & made in the USA.
• 4.6 Gallon - Tintable White - Our waterproof roof sealant is packaged in 5 gallon Pail. Designed for low-slope roof maintenance on metal roofing, built-up roofing, rolled roofing and more..

Metal Roofing Screws 1000 10 x 1-1/2   Galvanized Hex Head Sheet Metal Roof Screw Self Starting Metal to Wood siding Screws EPDM Washer No Paint

• #10 Sheet Metal ROOFING SCREWS.  Our metal roofing screws are galvanized for corrosion resistance..
• 1000 COUNT Metal-to-wood roofing screws have a type 17 self-starting tip for easy installation.
• Corrugated roofing and corrugated siding screws for pole barns, storage shed, shops, etc..
• Hex washer head roof screw with EPDM washer seal, seals roofing panel to screws to prevent leaks..
• The screw is Not Painted and is naturally a gray color due to the galvanizing process on the screw.

BOSTITCH BHT150C 1/4" Manual Hammer Tacker

• Heavy-duty manual hammer tacker ideal for carpeting, roofing materials or insulation.
• Uses 2 full sticks of Bostitch BTA700 Series heavy-duty staples ranging from 1/4-in to 3/8-in, or Arrow T-50 heavy-duty staples.
• Features a rubber grip for user comfort and shock absorption.
• Heavy-duty steel construction for added durability.
• Loads two full sticks of Stanley TRA700 or Arrow T-50 heavy duty staples (1/4-in -3/8-in).

ALPS Mountaineering Chaos 2-Person Tent, Clay/Rust

• There's no assembly frustration with our Chaos Tent series.
• this aluminum, free-standing pole system is quick and convenient.
• Polyester tent fly resists water and UV damage while adding two vestibules for extra storage space.
• Mostly mesh walls and mesh roofing increases ventilation and improves star-gazing.
• Fully equipped with #8 zippers, mesh storage pocket, gear loft, aluminum stakes, guy ropes and one entry way.
• Base Size: 4'8 x 7'2, Center Height: 40", Total Weight: 5 lbs. 15 oz., Minimum Weight: 5 lbs. 7 oz., Color: Clay/Rust.

ALPS Mountaineering Chaos 3-Person Tent, Gray/Navy

• There's no assembly frustration with our Chaos Tent series.
• this aluminum, free-standing pole system is quick and convenient.
• Polyester tent fly resists water and UV damage while adding two vestibules for extra storage space.
• Mostly mesh walls and mesh roofing increases ventilation and improves star-gazing.
• Fully equipped with #8 zippers, mesh storage pocket, gear loft, aluminum stakes, guy ropes and two easy entry doors.
• Base Size: 5'6 x 7'6, Center Height: 41", Total Weight: 7 lbs. 5 oz. , Minimum Weight: 6 lbs. 8 oz. , Color: Gray/Navy.

#12x1-1/2' Metal to Metal Type #3 Galvanized/ZINC Hex Head Drill Point Metal to Metal Roofing Screws. 9/16' EPDM Washer

• #12 Metal to Metal #3 Roofing Screws with Drill Point tip. 5/16" Hex Head, 9/16" Washer.
• 250 COUNT Metal-to-Metal Galvanized Zinc roofing screws are a natural gray color & rust resistant.
• Hex washer head, drill point roof screw with EPDM washer seal, seals roofing panel to screws..
• #12 - 3 Metal to Metal Screw is designed for attaching roofing & wall panels to steel buildings.
• Coarse Threaded Type 3 Screws generally used in thinner or lighter steel or aluminum products.

#12x1-1/2' Metal to Metal Type #5 (Galvanized/ZINC) Hex Head Drill Point Metal to Metal Roofing Screws. 9/16' EPDM Washer

• #12 Metal to Metal #5 Roofing Screws with Drill Point tip. 5/16" Hex Head, 9/16" Washer.
• 250 COUNT Metal-to-Metal Galvanized Zinc roofing screws are a natural gray color & rust.
• Hex washer head, drill point roof screw with EPDM washer seal, seals roofing panel to screws..
• #12 - 5 Metal to Metal Screw is designed for attaching roofing & wall panels to steel buildings.
• Fine Threaded Type 5 Screws is designed to work in thicker materials rated from 3/8" to 1/2".