Reviews Roofing Screw With Nut

#12x1-1/2' Metal to Metal Type #3 Galvanized/ZINC Hex Head Drill Point Metal to Metal Roofing Screws. 9/16' EPDM Washer

  • #12 Metal to Metal #3 Roofing Screws with Drill Point tip. 5/16" Hex Head, 9/16" Washer.
  • 250 COUNT Metal-to-Metal Galvanized Zinc roofing screws are a natural gray color & rust resistant.
  • Hex washer head, drill point roof screw with EPDM washer seal, seals roofing panel to screws..
  • #12 - 3 Metal to Metal Screw is designed for attaching roofing & wall panels to steel buildings.
  • Coarse Threaded Type 3 Screws generally used in thinner or lighter steel or aluminum products.
Check Stock

#12x1-1/2' Metal to Metal Type #5 (Galvanized/ZINC) Hex Head Drill Point Metal to Metal Roofing Screws. 9/16' EPDM Washer

  • #12 Metal to Metal #5 Roofing Screws with Drill Point tip. 5/16" Hex Head, 9/16" Washer.
  • 250 COUNT Metal-to-Metal Galvanized Zinc roofing screws are a natural gray color & rust.
  • Hex washer head, drill point roof screw with EPDM washer seal, seals roofing panel to screws..
  • #12 - 5 Metal to Metal Screw is designed for attaching roofing & wall panels to steel buildings.
  • Fine Threaded Type 5 Screws is designed to work in thicker materials rated from 3/8" to 1/2".
Check Stock

Metal Roofing Screws 250 12 x 2 ZINC/NO Paint Hex ReGrip Sheet Metal Roof Screw Sharp Point Metal to Wood siding Screws.

  • #12 Sheet Metal ROOFING SCREWS.  Sharp Point ReGrip Screws. 5/16" Hex Head, ~9/16" Washer.
  • 250 COUNT Metal-to-wood roofing screws are galvanized and zinc coated to prevent rusting.
  • Hex washer head, sharp point roof screw with EPDM washer seal, seals roofing panel to screws..
  • Corrugated roofing and corrugated siding screws for pole barns, storage shed, shops, etc..
  • Galvanized Screw is Non-Painted and gets it's Color from the Galvanizing Process and is natural gray.
Check Stock

IVY Classic 11163 Roofing Knife with Blade 1/Card

  • ALL METAL CONSTRUCTION: heavy-duty metal construction. Plated for rust resistance..
  • VERSATILE: cuts roofing material and shingles. Knife swivels open for blade change after removal of wing nut..
  • ROOFERS BLADE INCLUDED: retractable bowtie shaped blade adjusts to exact position and depth of cut..
  • COMPATIBILITY: fits Ivy Classic 11176 roofers blade and other roofing blades.
  • BLADE SPECIFICATIONS: high-carbon steel bowtie shaped with 4 cutting edges, blade thickness: .024"..
Check Stock

Nut Hugger Screw Storage Organizer- 6 Interior Dividers and 13 Exterior Pockets - Carrier for Screws, Nails, Electrical Wire Nuts, Staples, Nuts & Bolts, Cable Connectors - Stacks in 5 Gal Bucket

  • ALL PURPOSE WORK BAG – This versatile hardware bag can be used for storing all kinds of job accessories including nails, nuts, bolts, screws, fasteners, wire nuts, electrical staples, sheetrock screws, roofing nails, HVAC accessories, and more.
  • EXPANSIVE POCKET SPACE – Each Nut Hugger canvas bag features 19 storage pockets including 6 interior and 13 exterior to maximize and organize your space-saving storage options. Exterior pockets make this a perfect portable tool caddy for hand tools.
  • REINFORCED CANVAS CONSTRUCTION – These parachute bags are crafted with heavy-duty canvas with a nylon pull cord for strength and stability perfect for job sites and is perfect for welding, plumbing, flooring, concrete, and woodworking accessories.
  • STACKABLE BUCKET FILLERS – At 10” x 6.5” x 6.5” in size our bags can stack up to four high in a standard 5-gallon bucket to make it easier to stay ahead of daily job needs. Works great as tool bag, screw bag, nail bag, staple bag or wire nut bag.
  • WATERPROOF POLY BOTTOM – Along with a strong drawstring cord to secure each pocket our parachute bag has a waterproof bottom to keep contents from rust or corrosion. Interior dividers provides sections to organize parts in your bucket like a boss.
Check Stock

#14 Metal Roofing Screws 250 Screws x 1-1/2 Galvanized Hex Head Sheet Metal Roof Screw Self Starting Metal to Wood Sheet Metal Screws with EPDM Washer for Corrugated Roofing

  • Dimensions: 5/16" Hex Head and ~9/16" EPDM washer - Shaft is .242" (#14) - Length under head 1-1/2".
  • Polyurethane coated screw head is painted to closely match many brands of metal roofing (color may vary).
  • #14 Sheet Metal roofing screws are galvanized for corrosion resistance.
  • Sharp T17 type point securely fastens metal roofing to wood structures quickly and easily.
  • For installing roofing on a house, porch, airplane hangar, shed, pole barn, shop, barn or lean-to.
Check Stock

BJADE S 48ft Micro Mesh Gutter Guard,Universal Fit 6 ,5 ,4 Gutter Size,Stainless Steel Anti-Leaf Gutter Cover Kit

  • UNIVERSAL SIZE GUTTER GUARDS:BJADE'S gutter cleaning tools suitable for 4", 5", and 6" metal roofing gutters,it is easy to cut to fit corners..
  • HIGH QUALITY GUTTER CLEANER:Constructed of powder-coated stainless steel which corrosion-resistant and oxidation-resistant for long time protection.
  • MESH GUTTERS:Micro mesh leaf guards for gutters,keeps leaves,pine needles,debris, dirt,seeds from entering while handling the heaviest downpours,it....
  • EASY INSTALLATION:Slightly lift up the shingles and slide the gutter guard under the shingle,then lock leaf filter gutter protection to the front lip....
  • PACKAGE:One carton contains 35 pieces,total length 48 Ft,1 pc magnetic nut driver drill bit s,80 pcs self-drilling screw,1 pieces installation....
Check Stock

WORX WA0222 40V Nitro Driveshare Pole Saw Attachment

  • Specs: Description: Hybrid Trimmer Head, Arbor Sizes: M8 x 1.25 LH x 22 mm stamped #1 screw, M10 x 1.25 LH x 21 mm stamped #2 screw, M7 x 1.00 LH x 22 mm stamped #3 screw, M8 x 1.25 RH x 22 mm stamped #4 screw, 5/16"-18 UNC RH x 19 mm stamped #5 screw, M8 x 1.25 RH stamped A nut, M10 x 1.25 LH stamped B nut, M10 x 1.00 LH stamped C nut, 3/8"-24 UNF-2B RH stamped D nut, 5/16"-24 UNF-2B RH stamped E nut, M10 x 1.50 LH stamped F nut, M8 x 1.25 RH stamped J nut, 3/8"-24 UNF-2B LH stamped K nut.
  • Compatible With/Replacement For: most gas, straight and curved shaft trimmers.
  • Stens 1 year warranty ensures reliability and performance for every part. We're confident that our products will work flawlessly, but in a rare case that it does not, we'll replace it anytime within one year of your order..
  • Stens branded parts are trusted by professional dealers to perform OEM quality repairs. The Stens name is featured on all Genuine Stens product packaging..
Check Stock

Rexka 10 Sets Engine Splash Shield Screws for Ford - T30 Torx Head Bolts and Grommets for Undertray Engine Fender Liner Deflector Grille for Ford Escape F-150 Edge Focus Fusion C-Max S-Max Lincoln

  • Meet or Exceed OEM Specification, Made of High Quality Durable Nylon not Plastic. Usually Used Together In Air Deflectors, Splash and Heat....
  • Other Names (Screw) :Emblem Screw, Deflector Screw, Fender Liner Screw, Lower Deflector Screw, Lower Shield Screw, Under Cover Screw, Front Shield....
  • Other Names(Nut) :Front Deflector Retainer Nut, Side Shield Nut, Under Cover Nut, Rear Deflector Nut, Deflector Nut, Lower Shield Retainer Nut,....
  • Fits the Following Cars: C-Max 2013-2018,Fusion 2013-2018, Escape 2013-2018, F-150 2015-2018, Edge 2015-2018, Escort 1985-1990 1995-2001, Focus....
  • 10 pcs of T30 Torx Drive Head Self-Tapping Screw, Black Phosphate, M5 x 20mm.
  • 10 pcs of Screw Grommet,Light Green Nylon.
Check Stock

#14 Metal Roofing Screws(250) Screws x 2" Ivy/Forest Green Hex Head Sheet Metal Roof Screw. Self Starting/Tapping Metal to Wood Sheet Metal siding Screws -EPDM Washer. for Corrugated Roofing

  • Dimensions: Hex Head 5/16" - Shaft .25" - EPDM Washer ~9/16" - Head Height .2" Length 2-1/64" (UH).
  • Screw head is painted with a two part polyurethane for longer product life (Not Zinc).
  • Polymer coated roof screw head painted to closely match various brands of metal roofing - may vary.
  • #14 Sheet Metal roofing screws are galvanized for corrosion resistance.
Check Stock

Mssoomm Double Nut Ball Screw DFU2005 RM2005 20mm Length 90.55 inch / 2300mm with Double Nut BK/ BF15 Standard End Machining for CNC Machine

  • with double ball screw nut and with standard end machining for BK/BF15. The lead time is 7-10 Business Days except for for Chinese National Day holiday and Spring Festival.
  • WARRANTY: Within 3 months receiving the ball screw, if there is any problem except for damage caused by man-made or improper operation, with the premise of choosing the proper product model and ensuring the working environment ventilatedly and tidily, we will send a new ball screw for free or give a total refund. What you need to do is to message us through Amazon.
  • Double Nut Ball Screw assembles two inner-circulate nuts together, therefore reduces the backlash of ball screw. The stability is then enhanced and the accuracy is up to 5. This design is especially good for CNC machine centers.
  • No stick-slip effect, low friction, low operation noise, heats up less, reduce driving power required, and make service life longer.
  • Double nut ball screw model includes DFU1604, DFU1605, DFU2005, DFU2505, DFU2510, DFU3205, DFU3210, DFU4005, DFU4010, DFU5010, DFU6310, DFU8010.
  • Ball screw nut, nut   housing, coupling, ball screw support BK, BF, EK, EF, FK, FF and end machining service are available, please let us know.
Check Stock

SFU2005 300mm Ballscrew kit + Set BK/BF15 Kit + 2005 Ballscrew RM2005 L300-1000mm ball screw with Ball Nuts + Screw Nut Housing for CNCRouter Machine

  • 【Package Include】- End Machined ballscrew SFU2005-300mm/11.81inch length with nut + BK15/BF15 end support with locknuts and circlips + 2005 Ball nut housing..
  • 【Basic Description】- SFU2005 series end machined ball screw adopts rolling thread manufacturing process, C7 grade conversion and rolling screw, the accuracy can reach 0.05mm. Fine workmanship, overall quenching treatment, high hardness, abrasion resistance, which is durable..
  • 【End support & Nut Housing】Ball screw vertical end supports BK15 and BF15, built-in deep groove ball bearings and matching lock nuts and snap rings, high precision, corrosion resistance, and 2005 nut housing matching ball screw, simple assembly and convenient installation..
  • 【Main Features】- The ball screw is equipped with a deflector single flange ballscrew nuta nd built-in balls, which can easily convert rotary motion into linear motion, with low friction, low noise, and smooth operation. In addition, it is equipped with a dustproof ring, which can prevent dust from entering the nut, which is beneficial to the normal operation of the screw rod..
  • 【Application Areas】- SFU2005 series ball screws are suitable for various scenarios such as lathes, CNC machine tools, machining, mechanical equipment, automation d....
Check Stock

PeakWorks Roof Anchor Bracket, Fall Arrest System, Tool Connects to Wood Surfaces with Roofing Harness Safety Kit, ANSI OSHA Compliant, Durable Steel Adjustable Connector, Red, V8229100

  • SAFETY CERTIFICATIONS – Temporary roof anchor bracket meets ANSI Z359 18, CSA Z259 15, and OSHA safety requirements for residential and commercial roofing applications, ensuring your safety in the most dangerous conditions.
  • REUSABLE ROOFING TOOLS – Re-use this roof anchor bracket as part of your fall arrest system or roofing harness safety kit.
  • roof anchor connects to wood surfaces with a screw size of 3" x #10 (32 screws / 16 per side).
  • SUPERIOR QUALITY – Anchor bracket is made with the quality materials ensuring top strength and durability to stand up to the toughest working environments.
  • STRONG CAPACITY – Hinged roof bracket built with a minimum tensile strength of 5,000 lb. and has a 310 lb. weight capacity.
  • COMPATIBILITY – PeakWorks Roof Anchors are designed and approved for use only with PeakWorks connectors, or with components that are approved by PeakWorks to be compatible with this product.
Check Stock