Reviews Roofing Nail Machines

National Nail 135055 250CT 1-Inch Plastic Cap Nail

• Deformed ring shank for greater holding power electro galvanized to enhance corrosion resistance. Conforms to surfaces..
• All hand driven caps are packaged as integral nail-cap units Cap nails round plastic burron cap ring shank lgth 1 inch count=250..
• Flexible round head conforms to surface making it difficult for water to get under the cap. use to secure roofing felt, sheathing, building papers, etc..
• Can be used for roofing felt, sheathing, polyethylene, roll roofing, re-roofing, chicken wire, wire lathe. Flexible plastic head..
• Flexible round head conforms to surface making it difficult for water to get under the cap. Can be used for roofing felt, sheathing, polyethylene, roll roofing, re-roofing, chicken wire, wire lathe..

BHTOP CN45N Roofing Nail Gun, 15 Degree Roofing Nailer, 3/4-Inch to 1-3/4-Inch Coil Nails, Air Nailer Coil 120-pcs Load Capacity

• Professional Roofing Nail Gun- Professional grade roofing nail gun designed with moving cylinder engine for low recoil. Compatible with 15 degree wire collated roofing nails from 3/4" to 1-3/4".
• 120 PCs Big loading capacity- Big loading capacity (120PCS) magazine will fasten a full bundle of shingles without reloading. Nails load from the side fast and easy.
• Special Improvement-Magnetic nail holder aligns the nails when loading and ensures jam-free firing. Tool-less depth of drive adjustment for precision nailing/flush driving.
• Widely Used -Ideal for a range of materials and applications which will meet all your different need in nailing. Perfect for applications such as roofing, asphalt and cedar shingles, wall sheathing, wood crate assembly, flooring underlayment, siding installation, and fences..
• Special Humanized Design-Steel contact safety with dual carbide inserts for less wear. Soft grip for comfort and control. Delivers the power to consistently drive nails in the toughest applications..

PeakWorks Fall Protection Safety Lifeline Rope Grab, Anchor 50' Vertical Cable, Galvanized Steel Snap Hook Harness Tools Equipment for Climbing, Rescue, Hunting, Roofing, V84084050

• 【Durable & Anti-rust Steel.】Our Roof Shingles Remover is made of hard steel material and the 2-in-1 design is more accurate, efficient and safer for quick installing or pulling nails on your roof shingles. With the rust proof and polished coating, our roofing tools will be your practical tool for shingle repairing and replacement..
• 【Nail-slot Design for Secure Grip.】With the unique nail groove design, you can inlay the nail and work in the narrow space smoothly. This Shingle Removal Tool will allow the roofing nails driven perpendicular to roof that bring longer lasting repairs without damaging the shingles with your hammer..
• 【Claw Tip for Nail Puller.】Our Shingle Nail Installer can easily pull out the nail from roofing shingles. Just drive the claw tip under the nail and twist, easily pull out the nail with less efforts that will definitely safe time and money..
• 【Easy to Use & Handy】This roof shingle nail installer is just handy to carry on with 1.1 inch in width and 11 inches in length, which make roofers work more accurate, efficient and safer. Our Roof Shingles are handy and fit for simple s....

Shingle Removal Tool,Roof Shingle Remover Roof Shingle Nail Puller Shingle Pry Bar,Roofing repairs Removing and installing replacement shingles,Professional Roofing Tools

• 【Handy And Premium Quality】Our Roof Shingles Removers are Made Of Premium High-strength Steel,Portable And Handy Size For Easily Using And Storage.With the rust proof and polished coating, our roofing tools will be your practical tool for shingle repairing and replacement..
• 【Nail-slot and Claw Tip Design】The Nail-slot Head Can Help You Put the Nails Easily.Claw Tip Can Remove Nails Easily From Roof Shingles,Roof shingle remover Makes it way easier to nail underneath shingles and do repairs.During installation, with the extended offset head that holds a roofing nail perfectly and you can strike the offset head with a hammer..
• 【Repair more efficiently】Professional Roofing Tools,it makes replacing individual or multiple Shingles a BREEZE.It saved pulling out old nails and lining up the new ones, For those who don't like being on the ROOF any longer than needed..
• 【A Must Have for All Roofers】Shingle Removal Tool is a must have tool for roofing repairs, it makes removing and installing replacement shingles a breeze without damaging the top overlapping and outer shingles especially if your dealing with a roof that has some age on it..
• 【Quality assurance】Any questions , any reason, you’re not happy with your purchase, please contact u....

Roof Shingles Shingle Removal Tool Roofing Tools Pitch Hopper Shingle Nail Installer Roof Shingle Nail Puller Nail Remover Pry Bar For Safe Roof Shingles Replacement Roofing tools and Equipment

• 【Durable & Anti-rust Steel.】Our Roof Shingles Remover is made of hard steel material and the 2-in-1 design is more accurate, efficient and safer for quick installing or pulling nails on your roof shingles. With the rust proof and polished coating, our roofing tools will be your practical tool for shingle repairing and replacement..
• 【Nail-slot Design for Secure Grip.】With the unique nail groove design, you can inlay the nail and work in the narrow space smoothly. This Shingle Removal Tool will allow the roofing nails driven perpendicular to roof that bring longer lasting repairs without damaging the shingles with your hammer..
• 【Claw Tip for Nail Puller.】Our Shingle Nail Installer can easily pull out the nail from roofing shingles. Just drive the claw tip under the nail and twist, easily pull out the nail with less efforts that will definitely safe time and money..
• 【Easy to Use & Handy】This roof shingle nail installer is just handy to carry on with 1.1 inch in width and 11 inches in length, which make roofers work more accurate, efficient and safer. Our Roof Shingles are handy and fit for simple storage..
• 【A Must Have for All Roofers.】This shingles removal tool is a must-have for all roofers to remove or repair old or worn-....

Senco 8V0001N 1-3/4\ 15 Degree Angle Wire Coil Nailer, Red/Gray - 445Xp

• Drives 11 gauge (.120"), full round head roofing nails 3/4" 1-3/4" smooth shank..
• Tool-free adjustable depth of drive for consistent and controllable nail set.
• Adjustable nail canister accommodates entire range of true round-head roofing nails.

Roof Shingle Snake Tools, Shingle Removal Tool for Safe Roof Shingles Professional Roofing Tools and Equipment Shingle Nail Installer & Puller Pitch Hopper, Pry Bar Furnish Nail Puller Remover

• 【Directly and Fastly Replace】 The roof snake makes replacing composition shingles safer, easier, and more accurate than traditional methods..
• 【Nail Slot Design】 With the unique nail groove design, you can inlay the nail and work in the narrow space smoothly. Allow the roofing nails driven perpendicular to the roof which brings longer-lasting repairs without damaging the shingles with your hammer..
• 【Claw Tip Design】 Easily pull out the nail from the roofing shingles. Just drive the claw tip under the nail and twist, easily pulling out the nail with less effort..
• 【Caution on the Using】 When installing the new 3-tab shingles, do not bend or hit the surrounding shingles, and do not accidentally hit your fingers with the hammer during installation..
• 【Customer Service】 If you have any questions, please feel free to contact us. We will offer the most sincere and high-quality after-sales service for you..

1-3/4\ - Copper Roofing/Slating nails - 100% Pure Copper nails (100)

Roofing Stripper, Roofing Remover, Roofing Mutt

• *Heavy duty Roofing Remover *Removes all types of roofing & flooring materials *Notched sharpen teeth *Unique Notch with Nail Puller *Easy maintenance -resharpen by hand filing only.

PacTool RS501 Roof Snake Tool - Shingle Pry Bar - Heavy Duty Nail Remover Tool - Roof Shingle Remover - Professional Roofing Tools

• COMMERCIAL CROWBAR: Replace old and worn-out composition roofing shingles in no time with our practical pry tool. Our roof snake makes removing and applying new shingles more accurate, efficient, and safer than traditional replacement methods..
• ROOFING TOOLS AND EQUIPMENT: Never damage your roof again with this convenient pocket pry bar. Install new 3-tab shingles without bending or hitting surrounding shingles or accidentally striking your fingers with your hammer in the process..
• HAND TOOLS: A must-have for all roofers, this tool is forged from high-strength steel and has a patented offset nail slot feature allowing you to align nails with the correct one-inch offset from the bottom edge of your current course..
• NAIL PULLER TOOL: There is no need for a flat bar with this handy claw tip, Easily loosen and remove old, damaged shingles and nails by driving the claw end under the nail, rolling the nail out, and twisting the roof snake..
• PACTOOL: Trusted for decades, we are the leaders in specialized construction, renovation, and remodeling designs. Our cutting-edge product line inspires craftspeople and DIYers to work smarter, measure better, and repair more efficiently..

Dubbs Hardware - 1.5 Inch Copper Nails Roofing Finish - Solid Pure Copper Slate Spikes Flashing Furniture Boat - Package Includes 10 oz of The Highest Quality Nails

• PURE COPPER NAILS - Pure copper 1.5 inch roofing nails with a 3/8" head.
• ROOFING NAILS - Great for roofing, boat building, or any other decorative projects.
• INSTALLATION - To ensure no bending when hammering in, drill a 3/32" pilot hole for best results.
• PACKAGE INCLUDES - Approximately 100 nails per 10 ounce pack of premium copper nail.
• USA MADE - Proudly Made in the United States.

Metabo HPT 1-3/4 Inch Full Round Head Wire Collated Roofing Nails | 7,200 Count | 12113HPT

• TYPE: Full Round Head Electro Galvanized Smooth Shank High Wire Collated Roofing Nails.
• APPLICATION: Nail provides excellent holding power for installation of asphalt roofing shingles and insulation boards.
• TREATMENT: Electro Galvanized, coats the nails with a layer of zinc, for greater rust resistance.
• COMPATIBILITY: Compatible with the Metabo HPT NV45AB2.

Carpenter Air Tools CCN45 7/8\ To 1 3/4\ 15° Pneumatic Coil Roofing Nailer

• The CCN45 drives 15° wire Collated roofing nails from 7/8 to 1-3/4 in length..
• Contact firing mode for convenience and speed enabling smooth uninterrupted operation..
• Ergonomic molded rubber grip ensures the tool fits comfortably in your hand reducing fatigue..
• Durable and lightweight heat-treated aluminum housing for years of solid performance..
• Holds a full coil of 120 roofing nails limiting the need for constant reloading and the tool free depth adjustment will help to make sure every nail is set perfectly..