Reviews Roofing Drip Edge Installation

RecPro Arctic White RV Fiberglass/Filon Siding 10ft

  • Fiberglass is 102" Wide and gauge: 0.045.
  • Has a protective film that must be removed after installation.
  • PLEASE NOTE** All fiberglass/Filon/flooring/Superflex/EPDM/Roofing cuts are obtained from a master roll. This means the ends will have a rough edge....
Check Stock

IVY Classic 15456 Solid Steel Shingler’s Hatchet Hammer with Vibration Cushioned Rubber Handle

  • VERSATILE ROOFING HAMMER: Hammer features a 3 hole gauge for measuring 4-1/2", 5", and 14.3 cm (U.S. standard and metric shingle measurements), a blade for trimming roofing felt and asphalt shingles, and a nail slot.
  • ONE PIECE, SOLID STEEL CONSTRUCTION: For strength and durability.
  • DROp FORGED: Drop-forged steel with polished, milled face and cutting edge.
  • VIBRATION CUSHIONED: Vibration from the hammer is absorbed through the shaft into co-molded contoured rubber handle.
  • SPECIFICATIONS: Cutting Edge: 1-7/8", Length: 13".
Check Stock

Stick Fast T1176 - Stabilizing Resin and Catalyst, 1 gallon

  • Fiberglass is 102" Wide and gauge: 0.045.
  • Has a protective film that must be removed after installation.
  • **PLEASE NOTE** All fiberglass/Filon/flooring/Superflex/EPDM/Roofing cuts are obtained from a master roll. This means the ends will have a rough edge and will be longer than the purchased cut length. This is done so the customer may cut the piece to exact specifications. Customer will make final cuts..
Check Stock

Metal Roofing Screws 1000 10 x 1-1/2   Galvanized Hex Head Sheet Metal Roof Screw Self Starting Metal to Wood siding Screws EPDM Washer No Paint

  • #10 Sheet Metal ROOFING SCREWS.  Our metal roofing screws are galvanized for corrosion resistance..
  • 1000 COUNT Metal-to-wood roofing screws have a type 17 self-starting tip for easy installation.
  • Corrugated roofing and corrugated siding screws for pole barns, storage shed, shops, etc..
  • Hex washer head roof screw with EPDM washer seal, seals roofing panel to screws to prevent leaks..
  • The screw is Not Painted and is naturally a gray color due to the galvanizing process on the screw.
Check Stock

Dripping In Chocolate

  • Built in easy to install 5 FT sections. 4" leg goes under the shingle with 1.5" hemmed edge on the fascia..
  • Matching 1.5" metal roofing screws, 1/4" hex bit driver, and gloves included with each order..
  • 75 degree angle fits most roof pitches with ease. Made from 26 Gauge metal roofing material with 40 year paint finish..
  • Custom sizes and shapes available. Shipping is free. All orders are shipped out same or next business day..
Check Stock

CREWTOWER Roofing Nail Gun, 15 Degree 3/4-inch to 1-3/4-inch Pneumatic Roofing Nailer, Heavy Duty Coil Roofing Nailer for Asphalt Fiberglass Shingles Lath Wire Fasterening Wooden Box Assembly

  • [Professional Nail Gun]: This roofing tool is made not only to get your work done, but also as a loyal servant to your beautiful life and dreams. This roofing nail gun is the right tool to assist you achieve those goals..
  • [Easy to Use]: With easy-to-load magazine, this roofing nailer is easy to load coil roofing nails. The quick-release nosepiece makes it easy to clear jams. Simply turning a wheel, you can adjust the nailing depth, and interchangeable trigger to switch firing mode..
  • [Powerful and Efficient]: This powerful air nailer is made of industrial-grade parts, firing engine provides quick response. Comfortable rubber handle and well balanced siding nailer gun body reduces fatigue for long time jobs. Large capacity magazine improves working efficency by minimizing replenishment time..
  • [Wide Applications]: This heavy duty coil roofing nailer is ideal for fasterning asphalt and fiberglass shingle, fasterning lath wire on plywood, siding installation and wooden box assembly..
  • [Tool Specifications]: The pneumatic coil roofing nail gun weighs only 5.67lbs with aluminium body, load capacity 120 nails, drives 15 degree wire welded coil roofing nails, nail length 3/4" to 1-3/4", shank diameter 0.12", air-powered, operating pressure 70-120PSI..
Check Stock

Uni-Vent II 1\x2\x20'

  • The Universal Ventilation System for all metal or polycarb panel roofs 2/12 to 20/12.
  • Tested Up to 110 MPH Wind Driven rain with NO measurable leakage. Apply to Ridge with Dual Strip 1/4" from edge of where Ridge Cap will be installed. Ridge cap is applied over top..
  • Pure Polyurethane Foam, Vinyl Coated, UV Stabalized/Fire Retardant.
  • 2" Wide 1" Standard Thickness 20' Long with a double glue strip..
  • The Uni-Vent II Will conform to Virtually any metal or polycarb roofing panel. It compresses and fills every void between the ridge and roof panels. Factory applied glue strips allow the installer to roll out Uni-Vent II and apply it to the panel even in windy conditions. Any standard ridge cap will finish your installation..
Check Stock

HEATIT Roof De-Icing Cable Clips 50-Pack

  • Included 50 aluminum roof clips for approximately 35 linear feet of roof edge.
  • You can use roofing adhesive or roofing nails to install the clips. The holes in each clip can make the clip more stable on the roof. Please buy the....
  • Commercial grade clips, made of non-corrosive aluminum, secure all major brand heat cables to roofs. Can be used on various roofs such as metal,....
  • Provide constant reliable holding power for heat cable on roofs.
  • Two year limited product quality warranty.If you are not completely satisfied with HEATIT products, please feel free to contact us in any time, we'll....
Check Stock

Dubbs Hardware - 1.5 Inch Copper Nails Roofing Finish - Solid Pure Copper Slate Spikes Flashing Furniture Boat - Package Includes 10 oz of The Highest Quality Nails

  • PURE COPPER NAILS - Pure copper 1.5 inch roofing nails with a 3/8" head.
  • ROOFING NAILS - Great for roofing, boat building, or any other decorative projects.
  • INSTALLATION - To ensure no bending when hammering in, drill a 3/32" pilot hole for best results.
  • PACKAGE INCLUDES - Approximately 100 nails per 10 ounce pack of premium copper nail.
  • USA MADE - Proudly Made in the United States.
Check Stock

Roof Protector Underlayment Roll - 42\ x 286'

  • Lightweight for easy handling and installation with 90 day UV exposure.
  • Superior tear resistance compared to roofing felt for increased durability.
  • Ideal for for sloped (003e= 2:12) commercial and residential roofs and roofing applications under asphalt shingles or metal cladding.
Check Stock

BHTOP CN45N Roofing Nail Gun, 15 Degree Roofing Nailer, 3/4-Inch to 1-3/4-Inch Coil Nails, Air Nailer Coil 120-pcs Load Capacity

  • Professional Roofing Nail Gun- Professional grade roofing nail gun designed with moving cylinder engine for low recoil. Compatible with 15 degree wire collated roofing nails from 3/4" to 1-3/4".
  • 120 PCs Big loading capacity- Big loading capacity (120PCS) magazine will fasten a full bundle of shingles without reloading. Nails load from the side fast and easy.
  • Special Improvement-Magnetic nail holder aligns the nails when loading and ensures jam-free firing. Tool-less depth of drive adjustment for precision nailing/flush driving.
  • Widely Used -Ideal for a range of materials and applications which will meet all your different need in nailing. Perfect for applications such as roofing, asphalt and cedar shingles, wall sheathing, wood crate assembly, flooring underlayment, siding installation, and fences..
  • Special Humanized Design-Steel contact safety with dual carbide inserts for less wear. Soft grip for comfort and control. Delivers the power to consistently drive nails in the toughest applications..
Check Stock

Trim-Lok Drip Rail, White – 1/2” Height, 25’ Length – PVC Plastic Rain Gutter for Cars, Vans, and RVs, Easy to Install Flexible Drip Rail Molding to Control Water Runoff, Durable 3M Tape Included

  • PLASTIC DRIP RAIL MOLDING: Manufactured from long-lasting plastic and with high-quality adhesive, the Trim-Lok Plastic Drip Edge will control water runoff while adding value, style, and functionality to any vehicle..
  • FITS MOST APPLICATIONS: This flexible drip rail molding simply bonds to the area above the windows on your truck, car, RV, or boat, channeling water so your head and car interior stay dry. It will also help eliminate streaks from dew and drizzle..
  • EASY INSTALLATION: With 3M acrylic automotive-grade foam tape included, installation is quick and easy. It is a flexible peel and stick plastic gutter rail that just takes minutes to install..
  • DIMENSIONS: This drip rail trim measures 1/2” in height and is 25’ long. Also available in other sizes/colors to match your unique application. Manufactured from durable PVC plastic and specially designed in a “J” shape to effectively channel water away..
  • TRIM-LOK: A family run business for over 50 years with products made in the USA, we believe that craftsmanship is never something that requires compromise. Our extensive product line provides solutions for a variety of marine, car, RV & home applications..
Check Stock

LENOX Utility Knife Blades, 50-Pack (20351GOLD50D)

  • High speed steel edge retains sharpness longer than standard utility blades.
  • Patented bi-metal construction allows shatterproof blades to bend and flex without breaking.
  • Four-notch design allows blade to extend further for deeper cuts in drywall, insulation, flooring, roofing, and more.
Check Stock