Reviews Roofing Coli Nails

Dubbs Hardware - 1.5 Inch Copper Nails Roofing Finish - Solid Pure Copper Slate Spikes Flashing Furniture Boat - Package Includes 10 oz of The Highest Quality Nails

  • PURE COPPER NAILS - Pure copper 1.5 inch roofing nails with a 3/8" head.
  • ROOFING NAILS - Great for roofing, boat building, or any other decorative projects.
  • INSTALLATION - To ensure no bending when hammering in, drill a 3/32" pilot hole for best results.
  • PACKAGE INCLUDES - Approximately 100 nails per 10 ounce pack of premium copper nail.
  • USA MADE - Proudly Made in the United States.
Check Stock

1\ Smooth Shank Solid Copper Roofing Nails 10 Gauge USA Made - Qty 100

  • Copper Roofing Nails are used in various roof installations, notably in slate roofs for their ease of removal if the slate needs to be replaced as well as their corrosion resistance and malleability..
  • They are also used for straps, gutters, and leaders as part of rain gutter systems, fascia installations, furniture restoration, and planked wooden boat construction. While designed for roofing, copper nails have other uses as well such as flashing and decorative finishing applications..
  • Copper roofing nails feature wide, flat heads for an increased bearing surface with diamond points and smooth shanks for ease of penetration. They are made entirely of solid copper and their corrosion resistance and malleability make them a good alternative to galvanized nails..
Check Stock

1\ Smooth Shank Solid Copper Roofing Nails 10 Gauge USA Made - Qty 50

  • Copper Roofing Nails are used in various roof installations, notably in slate roofs for their ease of removal if the slate needs to be replaced as well as their corrosion resistance and malleability..
  • They are also used for straps, gutters, and leaders as part of rain gutter systems, fascia installations, furniture restoration, and planked wooden boat construction. While designed for roofing, copper nails have other uses as well such as flashing and decorative finishing applications..
  • Copper roofing nails feature wide, flat heads for an increased bearing surface with diamond points and smooth shanks for ease of penetration. They are made entirely of solid copper and their corrosion resistance and malleability make them a good alternative to galvanized nails..
Check Stock

BHTOP CN45N Roofing Nail Gun, 15 Degree Roofing Nailer, 3/4-Inch to 1-3/4-Inch Coil Nails, Air Nailer Coil 120-pcs Load Capacity

  • Professional Roofing Nail Gun- Professional grade roofing nail gun designed with moving cylinder engine for low recoil. Compatible with 15 degree wire collated roofing nails from 3/4" to 1-3/4".
  • 120 PCs Big loading capacity- Big loading capacity (120PCS) magazine will fasten a full bundle of shingles without reloading. Nails load from the side fast and easy.
  • Special Improvement-Magnetic nail holder aligns the nails when loading and ensures jam-free firing. Tool-less depth of drive adjustment for precision nailing/flush driving.
  • Widely Used -Ideal for a range of materials and applications which will meet all your different need in nailing. Perfect for applications such as roofing, asphalt and cedar shingles, wall sheathing, wood crate assembly, flooring underlayment, siding installation, and fences..
  • Special Humanized Design-Steel contact safety with dual carbide inserts for less wear. Soft grip for comfort and control. Delivers the power to consistently drive nails in the toughest applications..
Check Stock

Simpson Strong-Tie S11A175RNBP 1-3/4 x .120 304SS Ring-Shank Roof Nails 480ct

  • 304 Stainless Steel 15-Degree wire coil ring shank roofing nails.
  • 1-3/4-Inch by 0.120 stainless steel Coil Roofing Nails.
  • Fits all standard 15-Degree coil roofing nailers.
Check Stock

Simpson Strong-Tie S11A150RNBP 1-1/2\ x .120 304SS Ring-Shank Roofing Nails 600ct

  • 304 Stainless Steel 15-Degree wire coil ring shank roofing nails.
  • 1-1/2-Inch by 0.120 stainless steel Coil Roofing Nails.
  • Fits all standard 15-Degree coil roofing nailers.
Check Stock

Simpson Strong-Tie S11A125RNBP 1-1/4 x .120 304SS Ring-Shank Coil Roof Nails 720ct

  • 304 Stainless Steel 15-Degree wire coil ring shank roofing nails.
  • 1-1/4-Inch by 0.120 stainless steel Coil Roofing Nails.
  • Fits all standard 15-Degree coil roofing nailers.
Check Stock

National Nail 135055 250CT 1-Inch Plastic Cap Nail

  • Deformed ring shank for greater holding power electro galvanized to enhance corrosion resistance. Conforms to surfaces..
  • All hand driven caps are packaged as integral nail-cap units Cap nails round plastic burron cap ring shank lgth 1 inch count=250..
  • Flexible round head conforms to surface making it difficult for water to get under the cap. use to secure roofing felt, sheathing, building papers, etc..
  • Can be used for roofing felt, sheathing, polyethylene, roll roofing, re-roofing, chicken wire, wire lathe. Flexible plastic head..
  • Flexible round head conforms to surface making it difficult for water to get under the cap. Can be used for roofing felt, sheathing, polyethylene, roll roofing, re-roofing, chicken wire, wire lathe..
Check Stock

Senco 8V0001N 1-3/4\ 15 Degree Angle Wire Coil Nailer, Red/Gray - 445Xp

  • Drives 11 gauge (.120"), full round head roofing nails 3/4" 1-3/4" smooth shank..
  • Tool-free adjustable depth of drive for consistent and controllable nail set.
  • Adjustable nail canister accommodates entire range of true round-head roofing nails.
Check Stock

Shingle Removal Tool,Roof Shingle Remover Roof Shingle Nail Puller Shingle Pry Bar,Roofing repairs Removing and installing replacement shingles,Professional Roofing Tools

  • 【Handy And Premium Quality】Our Roof Shingles Removers are Made Of Premium High-strength Steel,Portable And Handy Size For Easily Using And Storage.With the rust proof and polished coating, our roofing tools will be your practical tool for shingle repairing and replacement..
  • 【Nail-slot and Claw Tip Design】The Nail-slot Head Can Help You Put the Nails Easily.Claw Tip Can Remove Nails Easily From Roof Shingles,Roof shingle remover Makes it way easier to nail underneath shingles and do repairs.During installation, with the extended offset head that holds a roofing nail perfectly and you can strike the offset head with a hammer..
  • 【Repair more efficiently】Professional Roofing Tools,it makes replacing individual or multiple Shingles a BREEZE.It saved pulling out old nails and lining up the new ones, For those who don't like being on the ROOF any longer than needed..
  • 【A Must Have for All Roofers】Shingle Removal Tool is a must have tool for roofing repairs, it makes removing and installing replacement shingles a breeze without damaging the top overlapping and outer shingles especially if your dealing with a roof that has some age on it..
  • 【Quality assurance】Any questions , any reason, you’re not happy with your purchase, please contact u....
Check Stock

Metabo HPT 1-3/4 Inch Full Round Head Wire Collated Roofing Nails | 7,200 Count | 12113HPT

  • TYPE: Full Round Head Electro Galvanized Smooth Shank High Wire Collated Roofing Nails.
  • APPLICATION: Nail provides excellent holding power for installation of asphalt roofing shingles and insulation boards.
  • TREATMENT: Electro Galvanized, coats the nails with a layer of zinc, for greater rust resistance.
  • COMPATIBILITY: Compatible with the Metabo HPT NV45AB2.
Check Stock

Carpenter Air Tools CCN45 7/8\ To 1 3/4\ 15° Pneumatic Coil Roofing Nailer

  • The CCN45 drives 15° wire Collated roofing nails from 7/8 to 1-3/4 in length..
  • Contact firing mode for convenience and speed enabling smooth uninterrupted operation..
  • Ergonomic molded rubber grip ensures the tool fits comfortably in your hand reducing fatigue..
  • Durable and lightweight heat-treated aluminum housing for years of solid performance..
  • Holds a full coil of 120 roofing nails limiting the need for constant reloading and the tool free depth adjustment will help to make sure every nail is set perfectly..
Check Stock

meite 15 Degree Round Head 1-1/2-Inch × .120 Wire Weld Collated Smooth Shank Electro Galvanized Coil Roofing Nails 7,200 PCS/CASE (1 Box Pack)

  • 15 degree 1-1/2-Inch × .120 coil roofing nails.
  • For used in Bostitch RN46-1, Senco 455XP and other 15 degree coil roofing nailers.
Check Stock