Reviews Rockwell Hardness

Shark Corp 21-2225 10-Inch Prybar and Nail Puller

  • Forged heat-treated Cr-V alloy. Ends are tempered to Rockwell 50-52 hardness.
  • Nail puller end (Rockwell 50-52 hardness) bites into head/headless hardened nails.
  • Curved thin blade easily prys into tight spots and lifts molding with very little damage.
  • Back of the puller doubles as a striking surface.
Check Stock

Cangshan S Series 1024135 German Steel Forged 7-Piece BBQ Knife Set

  • Patented Angled Bolster design accommodates a firm, natural pinch grip. Well balanced and comfortable handle.
  • Forged and handcrafted full tang knives. High Alloy German Steel with a 58 +/- 2 on the Rockwell Hardness Scale..
  • High Alloy German Steel with a 58 +/- 2 on the Rockwell Hardness Scale..
  • Exceptionally sharp Asian style edge. Precisely heat-treated blades for long-lasting durability and edge retention..
  • All knives are National Sanitation Foundation [NSF] Certified. Lifetime Warranty against manufacturer defects. Wash knives with warm water and a little detergent, rinse carefully and dry with a towel. USPTO Patented Design..
Check Stock

Cangshan S1 Series 1023718 German Steel Forged 7-Piece BBQ Knife Set

  • Patented Angled Bolster design accommodates a firm, natural pinch grip. Well balanced and comfortable handle.
  • Forged and handcrafted full tang knives. High Alloy German Steel with a 58 +/- 2 on the Rockwell Hardness Scale..
  • High Alloy German Steel with a 58 +/- 2 on the Rockwell Hardness Scale..
  • Exceptionally sharp Asian style edge. Precisely heat-treated blades for long-lasting durability and edge retention..
  • All knives are National Sanitation Foundation [NSF] Certified. Lifetime Warranty against manufacturer defects. Wash knives with warm water and a little detergent, rinse carefully and dry with a towel. USPTO Patented Design..
Check Stock

Cangshan N1 Series German Steel Forged Nakiri Vegetable Cleaver, 7\ Blade, Silver

  • Hand crafted full tang knives forged from fine grained, X50CrMoV15 German Steel for incredible durability, stain resistance and exceptional edge retention..
  • Each blade goes through an (ultra6) stage heat treatment ensuring every blade maintains it's strength and function. HRC 58 +/- 2 on the Rockwell Hardness Scale..
  • Well balanced 5" handle and 3.5" blade with HRC 58 +/- 2 on the Rockwell Hardness Scale..
  • This vegetable Cleaver, also know as a Nakiri is great for push cuts, slicing and dicing vegetables, mincing herbs and cutting fruit or cheese..
  • NSF International Certified. Lifetime Warranty against manufacturer defects. Wash knives with warm water and a little detergent, rinse carefully and dry with a towel..
Check Stock

Cangshan N1 Series 59090 German Steel Forged Chef's Knife, 8-Inch

  • Hand crafted full tang knives forged from fine grained, X50CrMoV15 German Steel for incredible durability, stain resistance and exceptional edge retention..
  • Each blade goes through an (ultra6) stage heat treatment ensuring every blade maintains it's strength and function. HRC 58 +/- 2 on the Rockwell Hardness Scale..
  • Well balanced 5.5" handle and 8" blade with HRC 58 +/- 2 on the Rockwell Hardness Scale..
  • This chef’s knife is the ultimate, all-purpose knife you will use every day. Use it for chopping, slicing, dicing, and mincing just about any ingredient..
  • NSF International Certified. Lifetime Warranty against manufacturer defects. Wash knives with warm water and a little detergent, rinse carefully and dry with a towel..
Check Stock

Cangshan N1 Series German Steel Forged Tomato and Cheese Knife 5 Blade Silver

  • Hand crafted full tang knives forged from fine grained, X50CrMoV15 German Steel for incredible durability, stain resistance and exceptional edge retention..
  • Each blade goes through an (ultra6) stage heat treatment ensuring every blade maintains it's strength and function. HRC 58 +/- 2 on the Rockwell Hardness Scale..
  • Well balanced 5" handle and 5" blade with HRC 58 +/- 2 on the Rockwell Hardness Scale. Sturdy slotted blade has a scalloped and serrated edge with prong tips..
  • This tomato knife’s serrated blade effortlessly cuts through tough skins and rinds and features a two-pronged tip for lifting slices of food. Designed to slice easily through both soft and semi-firm cheese as well..
  • NSF International Certified. Lifetime Warranty against manufacturer defects. Wash knives with warm water and a little detergent, rinse carefully and dry with a towel..
Check Stock

Cangshan TV2 Series 1020038 14C28N Swedish Steel Forged Chef Knife, 8-Inch

  • Hand crafted full tang knives forged from fine grained, Swedish 14C28N Steel for incredible durability, stain resistance and exceptional edge retention. USPTO Patented Design..
  • Each blade goes through an (ultra6) stage heat treatment ensuring every blade maintains it's strength and function. Holds an edge up to 5 times longer than German Steel. Hand sharpened to a 16-degree angle per side. HRC 59 +/- 2 on the Rockwell Hardness Scale..
  • Well balanced 5.5" handle and 8" blade with HRC 59 +/- 2 on the Rockwell Hardness Scale.
  • This chef’s knife is the ultimate, all-purpose knife you’ll use every day. Use it for chopping, slicing, dicing and mincing just about any ingredient..
  • NSF International Certified. Lifetime Warranty against manufacturer defects. Wash knives with warm water and a little detergent, rinse carefully and dry with a towel..
Check Stock

Flexbar Surface Roughness Standards Set – 30 Specimens

  • This digital indentation hardness tester is the latest design and development of our company. It is characterized in that provided with a balance positioning, a digital display of hardness value, and a non disassembly calibration and adjusting..
  • It is with good stability, convenient calibration, and high accuracy of detection. No need to support. The hardness tester is only tested on one side of the sample without support..
  • With the maximum hold function, hold the maximum hardness value during measurement. With the function of calculating the average value, and the average value of the 29 sets of data are calculated at most..
  • Wide test range, can test from very soft pure aluminum to a particularly hard aluminum alloy. effective test range equivalent to the Brinell Hardness of 25~150HB. Can be used for measuring not only Barcol Hardness, but also Brinell Hardness (HB), Vickers Hardness (HV), Webster Hardness (HW), Rockwell Hardness (HRB/HRE/HRF/HRH)..
  • Small in size, portable. Single hand operation, easy to use. Can be used in any occasion as long as the hand can reach. Provide Bluetooth data output choice..
Check Stock

Cangshan TG Series 62175 Swedish 12C27 Steel Chef Knife, 8-Inch, G10 Handle

  • Hand crafted full tang knives stamped from fine grained, Swedish Sandvik 12C27 Steel for incredible durability, stain resistance and exceptional edge retention. USPTO Patented Design..
  • Each blade goes through an (ultra6) stage heat treatment ensuring every blade maintains it's strength and function. Hand sharpened to a 16-degree angle per side. HRC 58 +/- 2 on the Rockwell Hardness Scale..
  • Well balanced 5.5" handle and 8" blade with HRC 58 +/- 2 on the Rockwell Hardness Scale. Includes carbonized solid Ashwood half open magnetic sheath to ensure your blade will be protected..
  • This chef’s knife is the ultimate, all-purpose knife you’ll use every day. Use it for chopping, slicing, dicing and mincing just about any ingredient..
  • NSF International Certified. Lifetime Warranty against manufacturer defects. Wash knives with warm water and a little detergent, rinse carefully and dry with a towel..
Check Stock

Cangshan R Series 62625 German Steel Forged Chef Knife with Ashwood Sheath, 8-Inch

  • Hand crafted full tang knives forged from tight grained, X50CrMoV15 German Steel for incredible durability, stain resistance and exceptional edge retention..
  • Full tang forged from x50cr15mov german steel with hrc 58 +/- 2 on the rockwell hardness scale.
  • Well balanced 5.5" handle and 8" blade with HRC 58 +/- 2 on the Rockwell Hardness Scale. Includes carbonized solid Ashwood half open magnetic sheath to ensure your blade will be protected..
  • This chef’s knife is the ultimate, all-purpose knife you’ll use every day. Use it for chopping, slicing, dicing and mincing just about any ingredient. Strong magnets are embedded into the edge of the sheath to hold onto the spine of the knife. A innovative and stylish way to protect your blades and fingers..
  • NSF International Certified. Lifetime Warranty against manufacturer defects. Wash knives with warm water and a little detergent, rinse carefully and dry with a towel..
Check Stock

Virginia Boys Kitchens - 3 Piece Chef Knife Set - Made in USA - German 420 High Carbon Stainless Steel - Chef Utilty Paring Knives

  • DESIGNED FOR HEAVY USE: Each knife is made using 420HC high-carbon stainless steel that’s been heat treated and tempered to a 58 Rockwell hardness,....
  • PRECISION V-SHAPED EDGE FOR EFFORTLESS CUTTING: Laser cut with to-the-millimeter precision from single piece of steel, each knife is forged and ground....
  • HAND ASSEMBLED ERGONOMIC HANDLE: Designed for comfortable handling and premier thumb stability, each full tang blade is hand-assembled to lock into a....
  • PROUDLY MADE IN AMERICA: We’re proud to be the high-quality, local option. Each knife is 100% made in the USA and is still assembled, polished,....
Check Stock

8 Inch Chef Knife - Made in USA - 420 High Carbon German Steel - Professional Sharp Knife made with American Black Walnut Wood Handle

  • DESIGNED FOR HEAVY USE: Each knife is made using 420HC high-carbon stainless steel that’s been heat treated and tempered to a 58 Rockwell hardness,....
  • PRECISION V-SHAPED EDGE FOR EFFORTLESS CUTTING: Laser cut with to-the-millimeter precision from single piece of steel, each knife is forged and ground....
  • HAND ASSEMBLED ERGONOMIC HANDLE: Designed for comfortable handling and premier thumb stability, each full tang blade is hand-assembled to lock into a....
  • PROUDLY MADE IN AMERICA: We’re proud to be the high-quality, local option. Each knife is 100% made in the USA and is still assembled, polished,....
Check Stock

Fromm Transform 5.75” Shear, Silver

  • Rockwell hardness: hardness level: 1 of 3.
  • Blade design: beveled blade is long lasting and nick resistant.
  • Cutting edge: semi-convex hybrid blade combining durabilitiy with increased sharpness.
  • Cutting edge: semi-convex hybrid blade combining durability with increased sharpness.
Check Stock