Reviews Rockler Table Saw Fence

Rockler Safety Power Tool Switch - Heavy-duty 15 Amp Power Switch - Stop Paddle to Quickly Shut off Power - Safety Switch for Router Tables or Workbench - Router Table Accessories

  • Rockler Router Table Switch: Just bump the "Stop Paddle" on/off switch, which is easy to find when you're in a tight spot, to quickly shut off power.....
  • “Stop Paddle” Table Saw Switch: This Rockler power tool switch mounts to Rockler steel shop stands or any other surface with screws. No more....
  • Hands-Free: This power tool safety switch helps you keep your hands on your work piece and not removing to hit a power off button. This stop button....
  • Easy To Locate: Locate our router switch near your hip or knee and you'll never have to take your hands off the work piece. The Rockler router....
  • Easy To Install: Several minutes tops that's all it takes. The start and stop router power switch is installed with the help of screws and can be....
Check Stock

Rockler Material Mate Panel Cart and Shop Stand – Mobile Base Stand Contains Smooth Rolling 4” Casters – Mobile Workbench for Tools - Rigid Steel Frame Construction – Woodworking Tools and Accessories

  • Rockler’s Material Mate Panel Cart & Saw Stand: The Rockler material mate-panel cart & table saw stand lets you easily roll 4' x 8' sheets of plywood or drywall from your truck or lumber rack to your table saw. You can add a top and use this woodworking table as a mobile shop stand, work table, or outfeed table..
  • Two Positions: The vertical position of this heavy duty cart with wheels allows passage through a service door as narrow as 30'', and provides a more compact footprint when not in use. Add a solid top (not included) as a work table, for use as a work table when not needed as a panel cart.
  • 4 Rubber Wheels For Smooth Running: Our shop stand has four rubber wheels with 4” casters that roll smooth over any surface. This panel cart can run smoothly on all kinds of surfaces like: tile, asphalt, carpet, concrete, etc..
  • Rigid Steel Frame (150lbs Capacity): This heavy-duty, mobile table cart has a rigid steel frame construction, which is sturdy and durable. The universal mobile cart has a top frame length of 36'' & a top frame width (adjustable from 22'' to 30-1/4'....
Check Stock

Rockler Double Featherboard

  • 4-Piece Wood Router Table Accessory Kit: Get a cleaner shop and safer, more consistent routing with this convenient Rockler router table accessory kit! Our 4-Piece Router Table Accessory Kit includes a dust port & 3 featherboards for more consistent cut quality and to help prevent kickback..
  • 3 Featherboards For Consistent Cut Quality: Two of the router featherboards mount to the fence, exerting pressure down toward the table, while the third mounts to the router table and keeps your work against the fence..
  • 2-1/2 Dust Port: Keep your router table clean and dust-free with our router dust port. This router fence dust port has a 2-1/2'' OD (2-1/4'' ID) hook-up..
  • Easy To Use: This miter slot featherboard can be quickly and easily connected to a miter slot openings of 3/8” deep x 3/4" wide or without the need for additional hardware..
  • What’s Included? Our 4-Piece router table accessory kit includes an easy-mount dust port, plus three featherboards for more consistent cut quality and to help prevent kickback..
Check Stock

DCT Table Saw Fence and Miter Gauge for Table Saw with 3/8in x 3/4in Miter Saw Fence Bar – Table Saw Gauge 18 Inch

  • MAKE ACCURATE CUTS: The DCT | Table Saw Miter Fence with Miter Bar Gauge & Flip Stop offers safety and accuracy when cutting or sanding precise,....
  • USE YOUR TABLE SAW: 3/4-inch (19mm) miter gauge groove fits most standard 3/4-inch table saw slots (measure slot on your table saw to ensure exact....
  • NO MORE PLAY: 18-inch (45.7cm) long fence bar has 8-inch (20.3cm) usable length after fence starts.
  • Bar is 3/8-inch (9.5mm) thick x 3/4-inch (19mm)....
  • BUILT TO LAST: Flip stop slides effortlessly along the fence and locks in place with the plastic tightening knob for quick adjustment while the flip....
  • PACKAGE CONTENTS: Table saw accessories package includes (1) table saw precision miter gauge, (1) fence, (1) flip stop, and necessary saw miter gauge....
Check Stock

Rockler Clamp-It Corner Clamp Jig - Glass-Filled Polycarbonate Woodworking Clamps - Corner Clamps to Hold Panel Parts Together - Right Angle Clamp for Fastening Work - Woodworking Tools

  • Table Saw Miter Sled: This is the perfect table saw sled, no adjustments needed! Simply cut one piece on the leading face, one on the trailing face, and voila! Since both pieces reference off a perfect 90-degree angle, the miters will fit perfectly..
  • 45 Degree Miter Sled: This table saw sled system gives you an exact 45-degree cut every time. Our table saw miter is great for picture frames or anytime accurate corner. Miters cuts are needed..
  • Adjusting Miter Track Fit: Use a 7/64" hex wrench (not included) to advance the nylon set screws in the Rockler 45 degree miter sled bar until you achieve a smooth, no-slop fit in your saw’s miter track..
  • Standard Slot: Through slots in the base allow you to securely clamp moldings at table level. This table saw miter sled fits standard 3/8" x 3/4" miter slots..
  • Easy To Use: The table saw accessories miter can be easily drilled to add extended fences and stops. Pre-installed adjustable nylon pins provide a no-slop fit to the miter track..
Check Stock

Rockler 45 Degree Miter Sled for Table Saw - Miter Saw Sled Ensures Durability & Low-Friction Sliding - Table Saw Accessories Fits Standard 3/8\ x 3/4\ Miter Slot – Fence Accessories

  • Table Saw Miter Sled: This is the perfect table saw sled, no adjustments needed! Simply cut one piece on the leading face, one on the trailing face, and voila! Since both pieces reference off a perfect 90-degree angle, the miters will fit perfectly..
  • 45 Degree Miter Sled: This table saw sled system gives you an exact 45-degree cut every time. Our table saw miter is great for picture frames or anytime accurate corner. Miters cuts are needed..
  • Adjusting Miter Track Fit: Use a 7/64" hex wrench (not included) to advance the nylon set screws in the Rockler 45 degree miter sled bar until you achieve a smooth, no-slop fit in your saw’s miter track..
  • Standard Slot: Through slots in the base allow you to securely clamp moldings at table level. This table saw miter sled fits standard 3/8" x 3/4" miter slots..
  • Easy To Use: The table saw accessories miter can be easily drilled to add extended fences and stops. Pre-installed adjustable nylon pins provide a no-slop fit to the miter track..
Check Stock

Vega U50 Table Saw Fence System: 36-Inch Fence Bar, 50-Inch to Right

  • Table saw fence system fits a variety of saws.
  • 36-inch fence bar (50 inches to right, 8 inches to left of blade).
  • micro adjustment and auxiliary table support.
Check Stock

Table Saw Fence Parallel Positioning Tool, Aluminum Alloy Saw Blade Alignment Jig Table Saw Indicator Gauge Woodworking Aligning and Calibrating Adjustable Limit Pin Positioning Ruler

  • Size: Precision steel pin is 350mm/13.78 inch.
  • Fixed block is 54x105mm/2.13x4.13 inch. Our simple set works with any table saw that has a miter slot nominally 3/8" x 3/4"..
  • Fence Alignment: Before it works, please either set or confirm the alignment of your fence to your table, then lock it and make a mark on the fence where the probe touches..
  • Repeat Cuts: When you have your fence set for a certain critical cut, but you have to change it for something else. When you need the fence back at the same spot, just slide the Simple Set back in the track and reset your fence..
  • Easy to Use: You just need to slide the probe until it touches your fence to check your saw blade to miter slot alignment, and lock the thumbwheel. A simple set of fence gauges fit in your table saw miter slot and hold an extendable stainless steel touch-off probe perpendicular to the slot..
  • Simple set fence gauges fit in your table saw miter slot and hold an extendable stainless steel touch-off probe perpendicular to the slot. Just slide the probe until it touches your fence, lock the thumbwheel and that' s it - a physical reference between the miter slot and the fence..
Check Stock

Vega U26 Table Saw Fence System: 36-Inch Fence Bar, 26-Inch to Right

  • Table saw fence system fits a variety of saws.
  • 36-Inch fence bar (26 inches to right, 8 inches to left of blade).
  • micro adjustment and auxiliary table support.
Check Stock

THE SMART CUT Aluminum Table Fence 18 ft with Universal Saw Attachment Mounts | For Any Portable Chop or Miter Saw Stand | Compact & Lightweight | Easy Setup Jobsite Table

  • LESS BOARD STRUGGLE: The Smart Cut Aluminum Table Fence universally attaches to any saw or stand (not included) giving you a flush fit to your saw back fence and base. Table sections can be configured left or right of the saw for cutting work pieces of any size. This table eliminates board struggle at the saw and keeps boards on plane for precise, accurate cutting..
  • COMPACT & LIGHTWEIGHT: The aluminum Table Fence is very lightweight, portable, and jobsite tough. Our miter saw accessories are heavy-duty, yet fast and easy to set up and tear down so you can go home at the end of the day. It’s a great addition to your miter saw stand, the table breaks down into (4) 4.5ft sections, it fits easily into your truck bed. Cost, quality, and versatility make this a superior product to other miter saw tables, miter saw fences, and miter saw accessories competitors..
  • SATISFACTION GUARANTEED: Made in the USA and Veteran Owned, we are confident you will love our miter saw products. We are committed to providing the highest level of customer satisfaction. If you are ever unsatisfied, reach out to us directly, and we will do all we can to make it right. Your satisfaction is our #1 priority..
Check Stock

Fulton Universal Aluminum Miter Gauge Fence with an Aluminum Flip Stop 18” Left Reading Tape 18” Right Reading Tape

  • When cutting mitered angles with your table saw you always want to make sure that have enough support of your stock when feeding it through the blade. The table saw blade is rotating toward you at a high rate of speed and if your workpiece moves to the side, the result can be scary and downright dangerous. With the help of a miter gauge and with our Aluminum Miter Fence secured to it, you will have full support all the way up to the blade on most of your miter angle cuts..
  • The Aluminum Miter Fence has been cut at 45 degrees on both ends of the fence. Doing this allows you to get as close to the blade as possible so your workpiece is fully supported throughout the cutting process. Straight cut or 90 degree cut fences have a large gap between the fence and the blade because it can not get as close with the straight cut ends on the fence..
  • Many times when we make miter cuts on our table saw, we need 2 or more pieces that are the exactly same length. While using the included measuring tapes that are included are pretty good at this, we have also included a handy flip stop that locks into any location along the length of the fence. This allows you to make repetitive length cuts without worrying if the pieces will end up the same. The flip stop can can simpl....
Check Stock

Grizzly Industrial G0701-19 5 HP Ultimate Bandsaw

  • Blade tension indicator quick change blade release/tensioning with blade tracking window.
  • Deluxe cast iron fence with extruded aluminum re-saw fence w.
  • Deluxe cast iron fence with extruded aluminum re-saw fence with precision-ground cast iron table.
  • Fence adjusts for blade lead includes scale magnifying window and 1-Inch blade.
  • Micro adjusting rack and pinion table tilt and height scale measurement.
  • Miter gauge foot brake stop rack and pinion upper guide adjustment and 4-Inch dust port x 2.
Check Stock

FTVOGUE Aluminium Alloy Miter Bar Slider Table Saw Miter Gauge Rod Wood Woodworking Tool (450mm/17.71inch)

  • This miter rod is made of high quality aluminium alloy, miter bar is of strong strength and reliable durability for several year using without abusing..
  • This is a miter bar usually used in table saw woodworking works .Universal threaded mounting holes for convenient use..
  • Adjustable stainless steel runner for perfect sliding action. For building various jigs on your table saw, like miter sleds etc..
  • Miter slot bar is easy to assemble, making it very easy to construct that ideal jig without dealing with the wood runners and the swelling issues..
  • These rockler miter bar easily in the miter slot when adjusted well, there is no side to side movement at all which makes for very accurate cuts..
Check Stock