Reviews Rmr Leds

Leisure Time 1 qt. Calcium Booster 6 Pack

  • INSTANTLY ELIMINATE ODORS & FUMES: Removes industrial-strength chlorine odors and fumes and leaves air refreshed and neutralized.
  • Use after RMR-86 and RMR-86 PRO Stain Removal, or any other odor causing household cleaners.
  • COMPLETE COVERAGE: Our odor eliminating neutralizer covers up to 300 square feet per gallon.
  • Spray or fog by using this deodorizer in an airless, electric solution, hand sprayer, or ULV cold fogger.
  • VALUE & SAVINGS: Mix our odor eliminator with warm water for a ready-to-use mixture.
  • 2 full scoops makes 1 gallon of solution that can be used to refresh and absorb odors.
  • FAST ACTING AND EASY TO USE: Our quick mix solution can be paired in a 1:1 ratio with RMR-86 and RMR-86 Pro Mold Stain Removal products.
  • Combine with water for instant odor elimination.
  • STOP CORROSION IN ITS TRACKS: Prevent and treat corrosion on chlorine and bleach based cleaning sprayers.
  • After each use, simply run RMR Neutralizer through hose and pump to stop corrosion from occurring.
  • ECO FRIENDLY: Stop harmful bleach and chlorine-based chemicals from absorbing into the soils and harming foliage. Spray soil /foliage before use to prevent chemical absorption, or immediately after to stop further absorption..
Check Stock

Ade Advanced Optics RD3-023 Valkyrie 4 MOA Green Dot Sight for Optics Ready Pistol That is Compatible with RMR fooprint Optics Such as Holosun HS407C/HS507C/HS507T and Riton X3 Tactix PRD.…

  • ADE RD3-023 Valkyrie is a 4 MOA GREEN dot designed to fit any pistol with a PISTOL that is compatible with RMR/SRO, Holosun 407C/507C/508T footprint red dots. The Valkyrie fits all pistol with optic cuts for Trijicon RMR/SRO, including aftermarket slide such as Rockslides, Polymer80 that has a optic cut for Trijicon RMR/SRO..
  • The Valkyrie Gen 2 also fits name brand pistol manufacturer made Optics Ready pistols, such as Glock MOS, S&W M&P 2.0 OP, IWI Masada, Smith Wesson MP C.O.R.E, CZ P10F/10C optics ready, Walther Q5 Match and Springfield XD/XDM/XDS OSP, Canik TP9 SFX/Combat, FN 509/45 Tactical, Shadow Systems MR 920 using pistol manufacturer provided plate marked for Trijicon RMR footprint..
  • Those name brand pistol manufacturer made "Optics Ready" handguns all come with several mounting plates/optic cuts marked for different brands of red dots, such as for Trijicon RMR, Shield RMS and Vortex Venom red dot footprint. The Valkyrie fits one of the pistol manufacturer provided plate marked that is compatible with Trijicon RMR..
  • ADE Valkyrie created a iron sight curve at the end of the body, and also added two white dots on the curve. For the rear of part of the red dot to become a "back up iron sight" to give enough distance to be a Co-Witness back up sig....
Check Stock

DPP Titanium Red Dot Mount/Plate/Adapter Compatible with Springfield XD Trijicon RMR/SRO&Holosun 407C/507C/508T

  • This Optic converter/adapter plate is made for any pistol slide that has a trijicon rmr optic cut, or optic plate can ONLY accept a trijicon rmr/sro....
  • Simply attach this adapter plate on the existing trijicon rmr optic cut as a regular optic plate. Screws are provided for over 25 popular red dot....
  • This adapter plate allow user to attach ADE RD3-006, RD3-09, RD3-012, RD3-013, RD3-018, RD3-019, Vortex Venom/Viper, Burris Fastfire 123, Sightmark....
  • Also compatible with Leica Tempus, Sig Romeo, Shield RMS/RMSC, Jpoint red dot sights..
  • Made in USA. This is the ONLY adapter(Made by ADE OPTICS) on the market to convert any pistol optic cut/plate that is with a trijicon rmr footprint,....
Check Stock

Ade Advanced Optics Picatinny Mounting Plate/Adapter/Mount - Compatible with Trijicon RMR ADE Stingray Holosun HS407C/HS507C/HS508T Red Dot Sight…

  • This Optic converter/adapter plate is made for any pistol slide that has a trijicon rmr optic cut, or optic plate can ONLY accept a trijicon rmr/sro....
  • Simply attach this adapter plate on the existing trijicon rmr optic cut as a regular optic plate. Screws are provided for over 25 popular red dot....
  • This adapter plate allow user to attach ADE RD3-006, RD3-09, RD3-012, RD3-013, RD3-018, RD3-019, Vortex Venom/Viper, Burris Fastfire 123, Sightmark....
  • Also compatible with Leica Tempus, Sig Romeo, Shield RMS/RMSC, Jpoint red dot sights..
  • Made in USA. This is the ONLY adapter(Made by ADE OPTICS) on the market to convert any pistol optic cut/plate that is with a trijicon rmr footprint,....
Check Stock

UTG Super Slim RMR Mount 2 in 1 Combo Picatinny

  • Precision CNC Machined from 6061-T6 Aircraft Grade Aluminum with Weight Reducing Lightening Cuts, and Finished in a Matte Black Anodize.
  • 0.87" Height Mount Positions RMR at the Correct Height for an Absolute Co-witness in line with Standard Height AR Iron Sights.
  • Low Profile 0.40" Height Mount Positions RMR at a Low Enough Height for Most Shotguns and Rifles with Traditional Stocks Not in Line with the Bore.
  • Utilizes Locking Torx Screws and Square-shaped Integral Recoil Stops for a Secure Zero Hold on Any Picatinny Rail.
  • Includes RMR Mounting Screws and Installation Tools for a Simple and Friendly Installation.
Check Stock

RMR Brands Complete Mold Killer & Stain Remover Bundle - Mold and Mildew Prevention Kit, Disinfectant Spray, Mold and Mildew Stain Remover, Includes 2 - 32 Ounce Bottles

  • TWO FAST-ACTING FORMULAS: The ultimate mold prevention kit, our bundle includes 1 spray bottle of RMR-86 and 1 spray bottle of RMR-141 RTU to kill mold and mildew instantly while lifting difficult stains that are left behind.
  • KILL MOLD AND MILDEW INSTANTLY: Our RMR-141 Disinfectant Spray Cleaner and Fungicide kills harmful molds and mildews, and prevents regrowth by completely eliminating the roots that other sprays often leave behind.
  • REMOVE STUBBORN STAINS IN SECONDS: Our RMR-86 Instant Mold & Mildew Stain Remover begins working immediately to target stubborn stains that linger on surfaces and hard-to-reach areas.
  • NO SCRUBBING NEEDED: Simply spray our ready-to-use formulas on the affected area and watch the mold and mildew disappear right before your eyes!.
  • SAFE TO USE ON MULTIPLE SURFACES: Use this powerful duo on wood decks, concrete floors, brick walls, carpeted areas, kitchen tiles, and any space where mold and mildew tend to grow.
Check Stock

Tactical Area Hunting Rear Sight Glok Plate Base Mount Universal Red Dot Sight Optics Sight Mount Glok Plate Base Kits

  • FEATURES: Universal optics mount for most proliferated sites in the field. Super low-profile. Ability to use an optic without cutting your slide..
  • DESIGN: The mount itself is secured to the slide via the dovetail with 6 set screws..
  • NOTE: Fits for all Models Except 42/43. The pins for the RMR red dot only fit for the original RMR. But it can also install well on the replica RMR....
Check Stock

DPP Titanium Dovetail Mount Compatible with Springfield XD Holosun 407K/507K,Shield RMS,Romeo Zero

  • Precision CNC Machined from Aircraft Grade Aluminum.
  • It is a picatinny mount, to connect to certain type of optic sight to standard 1913 picatinny/weaver rail. It does not connect to handgun because most....
  • Designed to use on ADE RD3-020 Raptor, RD3-023 Valkyrie, RD3-019 Stingray and Trijicon RMR/SRO red dots..
  • Compatible with Holosun HS407C/HS507C/HS508T, Riton X3 Tactix PRD, Trijicon RMR/SRO, Swampox Kingslayer/Liberty/Justice red dot sight.
  • Finished in a Matte Black Anodize. Comes with two screws to connect this ADE optic plate to Trijicon RMR..
Check Stock

Sheriff Chancy Rosman: A Chancy Rosman Western Adventure - Book 1

  • 3.25 MOA ADJUSTABLE LED RMR: Features an automatic brightness mode and easy push buttons for eight adjustable brightness settings including 2 nv and 1 Super bright.
  • DEPENDABLE ELECTRONIC DESIGN: Ruggedized Battery contacts and electronics ensure performance and survivability in harsh environments.
  • UNIQUE PATENTED HOUSING SHAPE: Military-grade aluminum alloy forged housing shape diverts force of impact away from the lens, greatly increasing its durability.
  • BATTERY CONSERVATION MODE: Automatically adjusts aiming dot to ambient lighting conditions after 16.5 hours. Battery Life- Over 4 years of continuous use (When used at 70ºF (21ºC))at setting 4 of 8. Extreme temperatures (high or low) will affect lithium battery performance.
  • BUTTON LOCKOUT: Sets RMR into automatic mode to prevent accidental adjustments. The Trijicon RMR Type 2 is tougher than any alternative and suitable for military, law enforcement and hunting applications.
Check Stock

DPP Titanium Mounting kit/Plate/Adapter Compatible with Glock Trijicon RMR/SRO&Holosun 407C/507C/508T Titanium

  • Precision CNC Machined from 6AL4V aerospace grade Titanium with black finish..
  • Hard As Steel but 45% lighter than steel.Ultra Low Profile and lightweight..
  • Compatible with Trijicon RMR/SRO and Holosun 407C/507C/508T.One Piece Design for a Secure Zero Hold,Easy to install.*NOT FIT THE FAKE TRIJICON RMR.
  • 100% MONEY-BACK warranty within 30 days of purchase*NO QUESTIONS ASKED. LIFETIME WARRANTY.
  • The kit includes 1X mount plate, 1X regular sealing plate,1X anti-flicker sealing plate, 3X RMR Screws (short),3X socket set screws and 1X Hex Key..
Check Stock

DEF RMR Mounting Plate Mount Sealing Plate Adapter Cover Kit for Glock G 17 19 34 35 40 41 Gen 4 MOS Springfield OSP Models

  • Fits: G17 Gen4 MOS, G17 Gen5 MOS, G19 Gen4 MOS, G19 Gen5 MOS26, G34 Gen4 MOS, G34 Gen5 MOS, G45 MOS, G35 Gen4 MOS, G41 Gen4 MOS, G40 Gen4 MOS,....
  • It can solve the battery contact problem of RMR and improve your RMR.
  • Necessary Conditions for RMR Fault-free Operation.
  • Include: a sealing plate for installation, two correct screws and a hex key.
  • You will need the two short screws in this kit.
Check Stock

DPP Titanium Mounting kit/Plate/Adapter Compatible with Glock Trijicon RMR/SRO&Holosun 407C507C/508T (Aluminum)

  • Precision CNC Machined from 7075-T6 aerospace grade Aluminum with Black anodizing finish..
  • The same kind of products on the market basically use 6061 aluminum but we use 7075, because 7075 aluminum is almost twice stronger than 6061 aluminum..
  • Compatible with Trijicon RMR/SRO and Holosun 407C/507C/508T,Ultra Low Profile and lightweight.*NOT FIT THE FAKE TRIJICON RMR.
  • One Piece Design for a Secure Zero Hold,Easy to install*100% MONEY-BACK warranty within 30 days of purchase*NO QUESTIONS ASKED. LIFETIME WARRANTY.
  • The kit includes 1X mount plate, 1X regular sealing plate,1X anti-flicker sealing plate, 3X RMR Screws (short),3Xsocket set screws and 1X Hex Key..
Check Stock

ADE Universal Plate for Converting Trijicon RMR/SRO Footprint to Vortex Venom/Burris Fastfire/Shield RMS Footprint Converter Adapter Plate

  • Precision CNC Machined from 7075-T6 aerospace grade Aluminum with Black anodizing finish..
  • The same kind of products on the market basically use 6061 aluminum but we use 7075, because 7075 aluminum is almost twice stronger than 6061....
  • Compatible with Trijicon RMR/SRO and Holosun 407C/507C/508T,Ultra Low Profile and lightweight.*NOT FIT THE FAKE TRIJICON RMR.
  • One Piece Design for a Secure Zero Hold,Easy to install*100% MONEY-BACK warranty within 30 days of purchase*NO QUESTIONS ASKED. LIFETIME WARRANTY.
  • The kit includes 1X mount plate, 1X regular sealing plate,1X anti-flicker sealing plate, 3X RMR Screws (short),3Xsocket set screws and 1X Hex Key..
Check Stock