Reviews Rigid To Emt Compression Couplings

Southwire - 63029840 Tools & Equipment FTSP45-75NCT Simpull Electrical Fish Tape with Non-Conductive Tip, Large Case, 4.5mm x 75 Feet

  • Works great in either filled or empty conduit.
  • TWO LEADER OPTIONS: comes with either a 360° swiveling flexible metal leader (580 lb. strength) or a non-conductive glow in the dark leader (380 lb. strength).
  • FASTER, EASIER PULLS: low friction design allows the tape to easily glide through the conduit without binding at turns, joints or couplings.
  • SPIRAL EXTRUDED POLYMER design does not rust and reduces the amount of effort required to push or pull the fish tape through EMT, IMC, rigid, or PVC conduit.
  • EXTREMELY FLEXIBLE: Combining the strength of steel fish tape with greater -flexibility than fiberglass fish tapes, this fish tape will not break when folded.
Check Stock

Morris Products 14940 EMT Compression Connector, Steel, 1/2\ Trade Size (Pack of 25)

  • EMT Compression Connectors - Steel - EMT Compression Connectors are Used To Secure EMT Conduit in an Enclosure..
  • Use to connect EMT Conduit to Steel Outlet Box, Load Center, or other Metal Enclosures.
Check Stock

Southwire FTSP45-125NCT Simpull Electrical Fish Tape with Non-Conductive Tip, Large Case, Two Leader Options, Spiral Extruded Polymer, Extremely Flexible, 4.5mm x 125 Feet

  • Works great in either filled or empty conduit.
  • TWO LEADER OPTIONS: comes with either a 360 swiveling flexible metal leader (580 lb. strength) or a non-conductive glow in the dark leader (380 lb. strength).
  • FASTER, EASIER PULLS: low friction design allows the tape to easily glide through the conduit without binding at turns, joints or couplings.
  • SPIRAL EXTRUDED POLYMER design does not rust and reduces the amount of effort required to push or pull the fish tape through EMT, IMC, rigid, or PVC conduit.EXTREMELY FLEXIBLE: Combining the strength of steel fish tape with greater -flexibility than fiberglass fish tapes, this fish tape will not break when folded..
Check Stock

Sigma Electric ProConnex 52100 EMT/Rigid Conduit Hanger #0, 50-Pack

  • Secures and supports Rigid and EMT conduit.
  • Trade size #0 for 1/2-in EMT or 3/8-in & 1/2-in Rigid conduit.
Check Stock

Gardner Bender GCC-410 2-Hole Heavy Duty Conduit Strap, 1.66 in, Plastic, Gray, 1-1/4\

  • Secures and supports Rigid and EMT conduit.
  • Trade size #3 for 1-1/2-in EMT or 1-1/4-in Rigid conduit.
Check Stock

Manufacturer Morris Products Codes 17454 Post Base Channel 4 Hole Square – for 1-5/8” Strut – Side Orientation, Galvanized Steel – 6” x 6” Base – Pack of 3

  • Material:Conduit hangers are made of zinc-plated iron,durable to use..
  • Conduit hanger ensure that the rigid conduit and EMT conduit are securely secured to the mounting surface..
  • High-quality and durable conduit hangers with bolt..
  • Used to secure and suspend EMT, rigid conduits from overhead supports..
Check Stock

Aopin Rigid Flange Coupling 5mm Inner Flange Coupler Shaft for 3D Printer, Length 15mm / 0.59\ Motor Coupler Connector, Great Apply for Model Shaft, CNC, Motor Guide, DIY Encoder 4 Pcs

  • 【Rigid Flange Coupling Size】: Inner Diameter: 5mm/0.20 inch, Outer Diameter:15mm/0.59 inch, Total Height: 15mm/0.59 inch, Flange Diameter: 28mm/1.10 inch, Base Height: 3mm/0.12 inche, 2 x M4 Fastening Screws..
  • 【Wide Range of Use】: Rigid Flange Coupler Are Used In Servo Motor Systems, 3D Printer, Cnc Machine, Diy Encoderspindle Transmissions, Stepping Motors, Lifting Platforms, Machine Tool Transmissions, Stepping Motors, Encoders, Screw Drives, Machine Platforms Or Gearboxes, Etc. The Purpose Is To Firmly Connect The Driving Shaft And The Driven Shaft To Rotate Together And Transmit Motion And Torque. Great Suitable For Short Support Shaft, Bushing Model, Miniature Shaft, Model Airplane/ Boat / Car..
  • 【Couplings Material】: High-Quality Aluminum Alloy Material, The Surface Is Treated By Anodizing, With Superior Corrosion Resistance. Color: Red, Suitable For Working In High Temperature (-80℃ / +300℃) And Harsh Environments, Even If There Is Vibration And Shock , It Is Still Safe To Move..
  • 【Features】: High Transmission Efficiency. When The Rated Torque Is Exceeded, The Coupling Can Protect The Safety Of The Linkage..
  • 【Package】: 4 Pcs Rigid Flange Couplings. Aopin Recommends Using M2 Hex Wrench!.
Check Stock

1 Piece Clamp 1/2\ x 5/8\ Bore Dia. Steel Rigid Shaft Coupling

  • Item - Rigid Shaft Couplings: Rigid Shaft Coupling, Clearance Dia. (In.): 1-9/16, Max. Torque (In.-Lbs.): 710.
Check Stock

uxcell 3mm to 1/8 inch Bore Rigid Coupling Set Screw L26XD10 Aluminum Alloy,Shaft Coupler Connector,Motor Accessories

  • Connection Diameter: 3mm to 1/8 inch, Total Length: 26mm /1.02 inch, Outside Diameter : 10mm/ 0.39 inch.
  • Widely used in blowers,3D printer,DIY robots,CNC machine,stepper motors,etc. Similar to rigid clamp couplings, shaft couplers are used to hold....
  • Top tight type rigid coupling with 2/4 screws to hold the shaft tightly.
  • high torque with rigidity, low inertia and excellent sensitivity..
  • NOTE: The rigid type basically does not allow eccentricity, and it must be fully adjusted during use..
  • Single piece set screw clamp design makes it easy to set up the items on the shaft and control the holding capacity of the coupling..
Check Stock

uxcell 10mm to 10mm Bore Rigid Coupling Set Screw L22XD16 45# Steel,Shaft Coupler Connector,Motor Accessories

  • Connection Diameter: 10mm to 10mm, Total Length: 22mm /0.87 inch, Outside Diameter : 16mm/ 0.63 inch.
  • Widely used in blowers,3D printer,DIY robots,CNC machine,stepper motors,etc. Similar to rigid clamp couplings, shaft couplers are used to hold bearings and sprockets tightly on the shaft, and are used in motor and gearbox assemblies..
  • Top tight type rigid coupling with 2/4 screws to hold the shaft tightly.
  • high torque with rigidity, low inertia and excellent sensitivity..
  • NOTE: The rigid type basically does not allow eccentricity, and it must be fully adjusted during use..
  • Single piece set screw clamp design makes it easy to set up the items on the shaft and control the holding capacity of the coupling..
Check Stock

uxcell 8mm to 8mm Bore Rigid Coupling Set Screw L22XD14 45# steel,Shaft Coupler Connector,Motor Accessories

  • Connection Diameter: 8mm to 8mm, Total Length: 22mm /0.87 inch, Outside Diameter : 14mm/ 0.55 inch.
  • Widely used in blowers,3D printer,DIY robots,CNC machine,stepper motors,etc. Similar to rigid clamp couplings, shaft couplers are used to hold bearings and sprockets tightly on the shaft, and are used in motor and gearbox assemblies..
  • Top tight type rigid coupling with 2/4 screws to hold the shaft tightly.
  • high torque with rigidity, low inertia and excellent sensitivity..
  • NOTE: The rigid type basically does not allow eccentricity, and it must be fully adjusted during use..
  • Single piece set screw clamp design makes it easy to set up the items on the shaft and control the holding capacity of the coupling..
Check Stock

uxcell 7mm to 7mm Bore Rigid Coupling Set Screw L22XD14 Copper,Shaft Coupler Connector,Motor Accessories

  • Total Length: 22mm/0.87 inch, Outside Diameter : 14mm/0.55 inch.
  • Widely used in blowers,3D printer,DIY robots,CNC machine,stepper motors,etc. Similar to rigid clamp couplings, shaft couplers are used to hold bearings and sprockets tightly on the shaft, and are used in motor and gearbox assemblies..
  • Top tight type rigid coupling with 2/4 screws to hold the shaft tightly.
  • high torque with rigidity, low inertia and excellent sensitivity..
  • NOTE: The rigid type basically does not allow eccentricity, and it must be fully adjusted during use..
  • Single piece set screw clamp design makes it easy to set up the items on the shaft and control the holding capacity of the coupling..
Check Stock

uxcell 4mm to 4mm Bore Rigid Coupling Set Screw L26XD10 Aluminum Alloy,Shaft Coupler Connector,Motor Accessories

  • Connection Diameter: 4mm to 4mm, Total Length: 26mm /1.02 inch, Outside Diameter : 10mm/ 0.39 inch.
  • Widely used in blowers,3D printer,DIY robots,CNC machine,stepper motors,etc. Similar to rigid clamp couplings, shaft couplers are used to hold bearings and sprockets tightly on the shaft, and are used in motor and gearbox assemblies..
  • Top tight type rigid coupling with 2/4 screws to hold the shaft tightly.
  • high torque with rigidity, low inertia and excellent sensitivity..
  • NOTE: The rigid type basically does not allow eccentricity, and it must be fully adjusted during use..
  • Single piece set screw clamp design makes it easy to set up the items on the shaft and control the holding capacity of the coupling..
Check Stock