Reviews Rigid Pipe

(Combo Pack) Exact Replacement Rotating Rigid Pipe Adapter and Termination Adapter (Black) - With 3” Hub and 3” Bayonet Lug Fittings

  • COMBO PACK 2-PIECE PIPE ADAPTERS - Inside is 1 piece rotating rigid pipe adapted and 1 piece termination adapter. Both are black and manufactured according to OEM specifications.
  • ROTATING RIGID PIPE ADAPTER - This is an RV waste outlet adapter that rotates for a quick connection. This is a standard-sized 3-inch RV twist-on adapter with bayonet hooks that connects the waste outlet to a 3-inch pipe.
  • TERMINATION ADAPTER - Designed for drain fittings connecting to a sewer hose or cap. One nub end supports a 3-inch twist-on connector with bayonet hooks while the female slip hub end accepts 3-inch ABS pipes that require gluing.
  • 3” HUB AND 3” BAYONET LUG FITTINGS - The rotating rigid pipe adapter has a 3-inch female slip hub and 4 bayonet hooks while the termination adapter has a 3-inch female slip hub and 4 bayonet lug nubs fittings.
  • MADE OF BLACK ABS PLASTIC - Ensure that you are using the correct type of glue when connecting either an ABS or PVC pipe to the adapters’ female slip hub.
Check Stock

Easy Heat AHB-112 Cold Weather Valve and Pipe Heating Cable, 12-Feet

  • Easy Heat pipe heating cable installs quickly and easily to keep water flowing.
  • Includes grounded plug, built in thermostat, and instructions.
  • Each cable consists of tough PVC inner insulation, a continuous ground braid, and weather-resistant PVC outer jacket.
  • AHB units are activated and de-activated by an integral energy-saving thermostat.
  • Approved for rigid plastic and metal pipe.
Check Stock

Reed Tool SC49-6 Ratcheting Soil Pipe Cutter with 6-Inch Chain

  • The fastest way to cut cast iron soil pipe, clay pipe, small diameter concrete pipe is with a chain pipe cutter.
  • Pipe Capacity (Inch - Nominal): 1 1/2-Inch - 6.
Check Stock

TAISHER 2PCS Forging of 304 Stainless Steel Compression Tube Pipe Fitting Connector 1/4 Tube OD x 1/4 NPT Male Straight Adapter

  • Widely used ——This pipe fitting is suitable for fuel/air/liquid/oil/gas/vacuum pipelines, with good air tightness, pressure resistance, and not easy to trip.
  • Product Material —— Forging of 304 stainless steel strength and resistance to corrosion..
  • Working Temperature —— Temperature range from -868 to 1472 degrees F/-500 to 800 degrees c..
  • Maximum Pressure —— Maximum working pressure is 2800PSI..
  • Function —— Fittings for connecting and extending stainless steel, copper, rigid and semi-rigid plastic pipes of the same diameter, hex nut construction creates a tight seal, one end is connected to the pipe and the other end is an NPT male connector.NPT thread size is not the actual diameter, it is only the nominal pipe size..
Check Stock

Morris 19425 Heavy Duty Rigid Pipe Strap, Steel, 1 Hole, 3/4\ (Pack of 50)

  • 1 Hole Rigid Pipe Straps - Heavy Duty - Steel - Secures Rigid & IMC Conduit..
Check Stock

Bessey VAC-6 Angle Plates (6-Pack)

  • 【SIZE】- Fit Pipe Diameter: 14mm/ 0.55".
  • 【MATERIAL】- Made of 304 high-grade stainless steel. After punching, bending, and integral molding, the structure increases the rib structure to improve the strength of the pipe clamp. Fastened and durable.
  • 【APPLICATION】- Widely used in plumbing, petrochemical, power supply, and other pipeline laying, fixing all kinds of pipelines on wood, masonry, or similar surfaces.
  • 【USAGE】- Choose the corresponding inner height of the pipe clamp according to the OD of the pipe, determine the hole according to the hole dia and position of the pipe clamp, and lock the fastening screw. A layer of soft gasket can be placed on the inner side of the pipe clamp and the pipe fittings, the effect will be better.
  • 【PACKAGE CONTENT】- 20Pcs × Rigid Pipe Straps.
  • Note: Mounting screws are not included here.
Check Stock

FAMKIT Woodworking Strap Clamp Adjustable Ratchet Band Clamp Miter Mitre Vise Tool for Cabinets, Drawers, Barrels

  • 1 Hole Rigid Pipe Straps - Heavy Duty - Steel - Secures Rigid & IMC Conduit..
Check Stock

Reed Tool H8S Hinged Pipe Cutter for Steel, 8-Inch

  • Designed for rapid cutting of 6-Inch through 8-Inch steel pipe, heavy-wall steel pipe and cast-iron pipe.
  • Operates with minimal cutter rotation as necessary for tight quarters.
  • Clean cut with limited crimping or bending.
Check Stock

IRWIN Level, I-beam, 48-Inch (1801094) , Blue

  • Rigid aluminum I-beam construction is rigid and durable.
  • Leveler has rotating dial vial to make it easier to find the angle you are looking for quickly.
  • V-groove edge for leveling pipe, making the job easier and quicker.
  • large handle for easy gripping and holding with or without gloves.
Check Stock

Dualco Grease Gun with Short Nozzle

  • INSTALLATION TIPS - Plunger rod length is 6" / 15.5 cm, only rod is pulled up to the end, can it be locked. After inserting cartridge grease into the barrel, tighten grease gun head counterclockwise, and then press the tab to retract plunger rod..
  • VARIOUS COLLOCATION - The set comes with a 12'' flexible hose, a 5'' rigid pipe and a 3'' rigid pipe which can be used for different collocation to meet your different needs..
  • LEAK-PROOF DESIGN - Compared with other grease guns,our product is equipped with thicker thread design to prevent leakage. And the unique knurling on barrel is specially designed for enhanced non-slip grip..
  • THREE WAYS LOADING - Adaptable to three different filling methods: 3oz cartridge, bulk loading (suction), and filler pump loading..
  • REINFORCED CONSTRUCTION - Made from chrome plated steel, the grease gun can stand up to 3000 PSI pressure with reinforced barrel, heavy duty plunger rod for high durability and long service life..
Check Stock

Reed Tool DEB4 Deburring Tool for Plastic 1-1/4 to 4-Inch

  • One easy revolution of the DEB4 Deburring Tool produces a 3/32-Inch 15-Degree chamfer in seconds.
  • Creates a smooth pipe end so solvent spreads evenly as pipe is joined.
  • Reversible, sharpenable, hardened steel blade for two cutting edges.
  • Deburrs six pipe sizes: 1 1/4-Inch - 4-Inch.
Check Stock

IRWIN Tools 1000 I-beam Level, 36-Inch (1801092) , Blue

  • Rigid aluminum I-beam construction is rigid and durable..
  • Rotating dial vial makes it easier to find the angle you are looking for quickly..
  • V-groove edge for leveling pipe, making the job easier and quicker..
Check Stock

IRWIN Level, Magnetic, I-beam, 24-Inch (1801091) , Blue

  • Rigid aluminum I-beam construction is rigid and durable.
  • Rotating dial vial makes it easier to find the angle you are looking for quickly.
  • V-groove edge for leveling pipe, making the job easier and quicker.
  • Full-length V-grooved strip magnet allows hands-free operation.
Check Stock