Reviews Rigid Clamping Systems

E. Emerson Tool Co. CXW-36 36-Inch Extra Wide All-In-One Contractor Straight Edge Clamping Tool Guide w/Story Stick

  • Straight Edge - E. Emerson’s Contractor Series self-clamping straight edge patented design has integral tubes running the length of the wide body construction, making it ultra rigid and light to handle..
  • No C-clamping - No more C-clamping! Achieve that truly straight cut using this self-clamping straight edge to guide your tools..
  • Extra Wide - This self clamping straight edge is extra wide for exceptional rigidity and has a low profile for obstruction-free cuts..
  • Flat Top - The extra low profile and flat top makes it easier for all circular saw or router straight cuts..
  • Contractor Series - Please note: recessed tracks accept Contractor Series Saw Plate, Router Plate, and Stop Block. But it will not work with A, Twin, or Ultra Series accessories..
Check Stock

JessEm 02120 Mast-R-Lift II Router Lift with Top Plate and 10-Piece Insert Ring Kit with Caddy for Router Plates and Lift Systems (2 Items)

  • Bundle Includes: JessEm 02120 Mast-R-Lift II Router Lift with 9-1/4-inch by 11-3/4-inch Top Plate and JessEm 10-Piece Insert Ring Set with Caddy for Router Plates and Lift Systems.
  • Built-In Locking Mechanism: Mast-R-Lift II has a built-in locking mechanism from above the table. Using the same handle you raise and lower your router lift, a simple turn and you are ready for those heavy-duty, long term routing operations.
  • Compatibility: With a standard top plate, Mast-R-Lift II fits routers with 9-1/4-inch by 11-3/4-inch base using a unique adjustable clamping block system.
  • Sturdy Construction: Mast-R-Lift II top plate is hard anodized. Hard anodizing is an engineered surface treatment providing a thick abrasion resistant coating and not just a cosmetic treatment that will wear off.
  • Lift Shafts: The lift shafts are hydraulically pressed into a larger diameter mount. Attaching the shaft mount to the top plate spreads the lateral load, providing a very rigid and durable mount, standing up to the toughest of routing operations.
Check Stock

Ade Advanced Optics PS002 Cantilever One Piece Riflescope Mount – 1″ inch

  • This is a 1″ inch one piece riflescope rings. Mounting rings are pushed forward 2″ for better eye relief..
  • ADE Cantilever Mount was designed by the experienced merchandise experts and ADE is able to get it from OEM manufacturer to sell at a fraction of cost compare to other brands where purchase this same mount and resale for a lot higher.
  • Our 3-bolt clamping systems with over 6,500 lbs of clamping force hold your scope firmly to the rail. Relief cuts designed into the scope tube bearing surfaces prevent scope pinching and ensure clamping forces are evenly distributed along the top and bottom of the scope body..
  • The Mount has no protruding levers, bolts, or knobs to rap your knuckles, or get caught on clothing, gear, and surroundings.
  • Height” 1.5″. Weight 6oz. Screw Torque – 15 in-lbs. We are so confident in these mounts they are covered under our excellent Lifetime Warranty..
Check Stock

Ade Advanced Optics PS001C 30mm Offset Cantilever One Piece Rifle Scope Mount

  • This is a 30mm one piece riflescope rings. Mounting rings are pushed forward 2" for better eye relief..
  • ADE Cantilever Mount was designed by the experienced merchandise experts and ADE is able to get it from OEM manufacturer to sell at a fraction of cost compare to other brands where purchase this same mount and resale for a lot higher.
  • Our 3-bolt clamping systems with over 6,500 lbs of clamping force hold your scope firmly to the rail. Relief cuts designed into the scope tube bearing surfaces prevent scope pinching and ensure clamping forces are evenly distributed along the top and bottom of the scope body..
  • The Mount has no protruding levers, bolts, or knobs to rap your knuckles, or get caught on clothing, gear, and surroundings.
  • Height" 1.5". Weight 6oz. Screw Torque - 15 in-lbs. We are so confident in these mounts they are covered under our excellent Lifetime Warranty..
Check Stock

Table Pedestal, 19.3‑28.3in Table Pedestal Kit Adjustable Silver Pillar with Mount Base Parts Universal Replacement for Caravan Motorhome Yacht

  • ...each rigid translucent, rigid black, and flexible clear standard wedges that are approx. 1.92" x 1.11" x .25"..
  • HOME IMPROVEMENT OR DIY-ERS: Our plastic shims for leveling are versatile wedge tools that can be used to fix things around the house like a professional! This incredibly versatile tool makes any shimming, clamping, adjusting, leveling and installation job easier, faster, and more precise. The soft flexible wedges can fit in small spaces to absorb vibrations and silence a rattling water pipe. This leveling tool also fixes a tilting or wobbly toilet..
  • EVERYDAY USE: Our Wobble Wedges are ideal for leveling home furniture such as an uneven bed frame, bookshelf, or dresser. Stabilize large kitchen equipment and fix wobbly tables in your store or restaurant. Easily level out your hanging shelves. No matter the size of your project, we've got the plastic wedge for it!.
  • MADE IN USA - MODULAR DESIGN: Precision engineered tapered leveling plastic shims feature interlocking ridges for a non-slip grip on both sides so you can securely stack these spacers. These plastic risers can be used independently or stacked together in any combination to level, tilt, lift, tighten, align, separate, secure, straighten, clamp or support. Our Wobble Wedges plastic shim....
Check Stock

Bora 36\ NGX Clamp Edge 544036

  • Clamping end moves with handle for easy adjustability from one side.
  • Locking handle grabs work surfaces for secure grip that won’t budge.
  • 30 inch cutting capacity. Easily increase length with 50 inch extension.
  • Made of heavy-gauge, rigid aluminum for extreme durability.
  • Use with circular saws, routers, jig saws, and other portable power tools.
  • Part of entire NGX Clamp Edge System to cut and rip sheets and boards.
Check Stock

Bora 24\ NGX Clamp Edge 544024

  • Clamping end moves with handle for easy adjustability from one side.
  • Locking handle grabs work surfaces for secure grip that won’t budge.
  • 24 inch cutting capacity. Easily increase length with 50 inch extension.
  • Made of heavy-gauge, rigid aluminum for extreme durability.
  • Use with circular saws, routers, jig saws, and other portable power tools.
  • Part of entire NGX Clamp Edge System to cut and rip sheets and boards.
Check Stock

Aven 17010 Adjustable Circuit Board Holder

  • Ideal for clamping PCB, for soldering/desoldering or rework.
  • Retractable to accommodate various board sizes up to 198mm wide and up to 4mm thick.
  • Rubber feet of the base ensure stability.
Check Stock

Aven 17010 Adjustable Circuit Board Holder ESD Safe

  • Ideal for clamping PCB, for soldering/desoldering or rework.
  • Retractable to accommodate various board sizes up to 198mm wide and up to 4mm thick.
  • Rubber feet of the base ensure stability.
Check Stock

USA Made 6 Large Clamp Ear Hook Replacements - Retail Packaging - Black/Clear

  • 50% of Samsungs please confirm compatibility.
  • Light weight and flexible doesn't break like the Stiff rigid OEM.
Check Stock

PTM Edge PCC-140 Ski/Wake Mirror & Bracket Combo

  • Carbon-fiber clamping windshield bracket and 140° HD panoramic mirror.
  • Easily install in minutes with a 1/4-inch Allen wrench.
  • Bracket is manufactured from carbon fiber composite, providing rigid and lightweight performance.
Check Stock

Taytools 388107 Quick-Adjust Vertical Workbench Surface Hold Down Clamp, Fits 3/4” Bench Dog Holes

  • ...This clamp will work in tops as thin as 3/4 inch thick..
  • The cast zinc base is 1-1/2 inches in diameter and 1-1/2 inches tall. The base and post are black coated to resist corrosion..
  • The moveable jaw slides easily along the serrated rails and then locks down tight when the handle is tightened offering slip-resistant clamping. The jaw is made from reinforced malleable steel and provides powerful and rigid clamping. The serrated carbon steel rail has an hourglass profile to resist flexing and twisting.
  • The moveable clamp jaw features smooth-turning carbon steel Acme threads and can generate up to 600 pounds of clamping pressure. The screw end has a 1 inch diameter swivel pad with a non-marring clamp pad to allow gripping of odd- shaped parts. Overall spindle travel is 2 inches. Threads are black coated to resist corrosion. The ergonomic soft grip Plastic/TPR handle optimizes torque and reduces hand fatigue..
Check Stock

Performance Tool M563DB Utility Cut-Off Tool

  • RUNS ON 220-VOLT SINGLE-PHASE 60HZ POWER: Great for small- to medium-size fabricating shops..
  • 2.5 HP MOTOR AND DIRECT-DRIVE GEARBOX: Lets the blade cut material chatter-free, increasing blade life..
  • SPINS AT 52 RPM: Cut through solids, tubing, or pipe..
  • EUROPEAN-STYLE VISE AND TAPER LOCK SYSTEM: For fast clamping and unclamping to increase production..
  • RIGID, CAST IRON BASE: Stabilizes the machine for straight, accurate cuts..
Check Stock