Reviews Right hand Lathe Tool

Accusize Industrial Tools 1\ 9 Pieces/Set, Indexable Carbide Turning Tools and Boring Bar, 2988-0001

  • ...carbide turning insert blades are made of cemented carbide and use PVD coating, the blade is sturdy, low friction coefficient, wear-proof and stable.
  • Suitable size: the diameter of the S07K/ S08K/ S10K handle is 4.92 inches/ 125 mm, S12M-SCLCR06 is 5.9 inches/ 150 mm.
  • cutting angle is 95 degree, cutting direction is right hand.
  • Each tool holder has a black oxidized smooth surface, and the tool hardness (HRC up and down 48 degrees) and has nice accuracy.
  • Easy to store: insert 10 pieces of cemented carbide into a boxes, and put them in a plastic container, safe and easy to store, compatible with SCLCR06 lathe boring bar turning tools holders.
  • Tight impact bolts, simple structure, often applied for small hole processing.
  • Note: due to the slight color change of manual measurement and different display settings, please allow a difference of 1-3 cm.
  • Due to the difference between different monitors, the picture may not reflect the actual color of the item.
Check Stock

Shop Fox M1099 10 by 26" Bench athe, Metal, Large

  • ... - 2500 RPM) and 2 speed ranges for low speed torque, Zero-settable hand wheels graduated in 0.001" on cross slide and compound rest, 4-way indexing tool post set for 5/16" (8 mm) tools, E-stop safety power switch, Rear apron shield, and backsplash..
  • Extended threading capability - A 16 TPI reversible lead screw for right-hand and left-hand threads, standard threading dial, and real top and bottom half-nuts, allow you to create every American Standard Unified inch screw thread from 4 to 80 threads per inch. With the extra 21 tooth change gear (included) you can create every American Standard Metric thread from 0.3 to 8.0 mm pitch..
  • Included contents: 32 full page Mini Lathe Users Guide (complete with operation examples, maintenance guidelines, parts diagram, wiring diagram, etc.), Precision 3" (80 mm) 3-jaw self-centering lathe chuck with two sets of jaws and a chuck wrench, Tailstock (13mm) drill chuck with shank and a 6mm drill bit, 8 mm Brazed Carbide RH Turning Tool, MT2 dead center, An 11-gear change gear set that includes a 21 tooth gear for accurate metric threading, Two open end wrenches, Four hex (Allen) wrenches..
  • About Us - LittleMachineShop.com is small U.S. business and the premier source of tooling parts and accessories for bench to....
Check Stock

Indexable Lathe Turning Tool,16mm Shank 7 Pieces Carbide Turning Tool Set,Mental Lathe Tools Holder with Portable Case,for Turning Grooving Threading with Tin Coated Carbide Inserts.

  • ...carbide turning insert blades are made of cemented carbide and use PVD coating, the blade is sturdy, low friction coefficient, wear-proof and stable.
  • Suitable size: the diameter of the S07K/ S08K/ S10K handle is 4.92 inches/ 125 mm, S12M-SCLCR06 is 5.9 inches/ 150 mm.
  • cutting angle is 95 degree, cutting direction is right hand.
  • Each tool holder has a black oxidized smooth surface, and the tool hardness (HRC up and down 48 degrees) and has nice accuracy.
  • Easy to store: insert 10 pieces of cemented carbide into a boxes, and put them in a plastic container, safe and easy to store, compatible with SCLCR06 lathe boring bar turning tools holders.
  • Tight impact bolts, simple structure, often applied for small hole processing.
  • Note: due to the slight color change of manual measurement and different display settings, please allow a difference of 1-3 cm.
  • Due to the difference between different monitors, the picture may not reflect the actual color of the item.
Check Stock

VEVOR Metal Lathe 7\x12\

  • Sturdy Iron Construction: The mini metal lathe bed is made of high grade iron. Equipped with nylon gears, this lathe machine is wear-resistant, durable, more accurate rotation and professional. Mini metal lathe power of motor: 550W. The full-length splashguard provides maximum protection..
  • Infinitely Variable Speeds: Spindle Speed from 0-2250 RPM. Forward and reverse in all speeds. Operate either manually or with the adjustable auto feed rate. The handness and accuracy of the v-slideways are obtained by raw material, heat hardening and grinding. Emergency stop buttom included..
  • Accurate 3-Jaw Chuck: Mini metal lathe chuck, 3-jaw self-centering chuck, for setting cylindrical materials steadily. Backsplash guard included. Spindle is supported by precision tapered roller bearings, spindle accuracy within 0.01mm. A free lamp is included..
  • Professional Compound Rest: The mini metal lathe quick change tool post can achieve positions of internal cutting, face cutting and bevel cutting by changing the tool post angle and adjusting the compound rest. Professional cross slide is designed with abrasive resistance, moving blades freely with feed rod..
  • Wide Application: Driven by DC motor, this mini metal lathe cut off tool can be used in areas such as mini precision....
Check Stock

Mophorn Metal Lathe 7\ x 12\

  • Sturdy Metal Construction: The mini metal lathe bed is made of high grade iron. Equipped with nylon gears, this lathe machine is wear-resistant, durable, more accurate rotation and professional. Mini metal lathe power of motor: 550W. The full-length splashguard provides maximum protection..
  • Infinitely Variable Speeds: Variable speed from 50-2500 RPM. Forward and reverse in all speeds. Operate either manually or with the adjustable auto feed rate. The handness and accuracy of the v-slideways are obtained by raw material, heat hardening and grinding. Emergency stop buttom included..
  • Accurate 3-jaw Chuck: Mini metal lathe chuck, 3-jaw self-centering chuck, for setting cylindrical materials steadily. Backsplash guard included. Spindle is supported by precision tapered roller bearings, spindle accuracy within 0.01mm. A free lamp is included..
  • Professional Compound Rest: The mini metal lathe quick change tool post can achieve positions of internal cutting, face cutting and bevel cutting by changing the tool post angle and adjusting the compound rest. Professional cross slide is designed with abrasive resistance, moving blades freely with feed rod..
  • Wide Application: Driven by DC motor, this mini metal lathe cut off tool can be used in areas such as mini precis....
Check Stock

14 Pieces Lathe Boring Bar Set 4 Pieces 95 Degree S07K/ S08K/ S10K/ S12M-SCLCR06 Lathe Boring Internal Turning Bar Holder with 10 Pieces CCMT0602 Carbide Inserts and 4 Pieces Wrench

  • ...carbide turning insert blades are made of cemented carbide and use PVD coating, the blade is sturdy, low friction coefficient, wear-proof and stable.
  • Suitable size: the diameter of the S07K/ S08K/ S10K handle is 4.92 inches/ 125 mm, S12M-SCLCR06 is 5.9 inches/ 150 mm.
  • cutting angle is 95 degree, cutting direction is right hand.
  • Each tool holder has a black oxidized smooth surface, and the tool hardness (HRC up and down 48 degrees) and has nice accuracy.
  • Easy to store: insert 10 pieces of cemented carbide into a boxes, and put them in a plastic container, safe and easy to store, compatible with SCLCR06 lathe boring bar turning tools holders.
  • Tight impact bolts, simple structure, often applied for small hole processing.
  • Note: due to the slight color change of manual measurement and different display settings, please allow a difference of 1-3 cm.
  • Due to the difference between different monitors, the picture may not reflect the actual color of the item.
Check Stock

33 Pieces Lathe Excircle Indexable Carbide Turning Tool Holder Bit Set MTJNR1616H16 + MWLNR1616H08 + MCLNR1616H12 with 30 CNMG 431 + WNMG 431 + TNMG 331 Metal Indexable Carbide Turning Insert Blades

  • Indexable carbide turning insert blades are made of cemented carbide and use PVD coating, the blade has high hardness, low friction coefficient, nice wear resistance and chemical stability.
  • Size: diameter of the handle is (5/8 x 5/8 inches/ 16 x 16 mm).
  • Overall length is 3-7/8 inch/ 100 mm, cutting direction is right hand.
  • Each tool holder has a black oxidized smooth surface, and the tool hardness (HRC up and down 48 degrees) and accuracy have reached the first grade.
  • Easy to store: insert 30 pieces of cemented carbide into 3 boxes, and put them in a plastic container, safe and easy to store, compatible with MTJNL1616H16, MWLNL1616H08, MCLNL1616H12 or MTJNR1616H16, MWLNR1616H08, MCLNR1616H12.
  • Note: due to the slight color change of manual measurement and different display settings, please allow a difference of 1-3 cm.
  • Due to the difference between different monitors, the picture may not reflect the actual color of the item.
Check Stock

Mophorn 7x12 Inch Luxury Version Metal Lathe 550W Precision Bench Top Mini Metal Milling Lathe Variable Speed 50-2500 RPM Nylon Gear with A Movable Lamp (7x12 inch)

  • Sturdy Iron Construction: The mini metal lathe bed is made of high grade iron. Equipped with nylon gears, this lathe machine is wear-resistant, durable, more accurate rotation and professional. Mini metal lathe power of motor: 550W. The full-length splashguard provides maximum protection.
  • Infinitely Variable Speeds: Variable speed from 50-2500 RPM. Forward and reverse in all speeds. Operate either manually or with the adjustable auto feed rate. The handness and accuracy of the v-slideways are obtained by raw material, heat hardening and grinding. Emergency stop buttom included.
  • Accurate 3-jaw Chuck: Mini metal lathe chuck, 3-jaw self-centering chuck, for setting cylindrical materials steadily. Backsplash guard included. Spindle is supported by precision tapered roller bearings, spindle accuracy within 0.01mm. A free lamp, 1x 4-Jaw Independent Chuck, 1x Quick Change Tool Post and 4x Engineers Measuring Kit are included.
  • Professional Compound Rest: The mini metal lathe quick change tool post can achieve positions of internal cutting, face cutting and bevel cutting by changing the tool post angle and adjusting the compound res....
Check Stock

QWORK Lathe Threading Tools, 10PCS 16IR AG60 Carbide Threading Inserts for Threading Turning Holder

  • Model:10 Pcs 11IR A60 1/4 Carbide Inserts Blade,suitable for Lathe Threading Tool.Right-handed external thread inserts.
  • Material: cemented carbide.Size:Length:9mm,Thickness:3mm.
  • The inserts has high hardness, low friction coefficient, good wear resistance and chemical stability,Good for cutting and Metal surface finishing.
  • 10 pieces Lathe Threading Inserts in 1 box, packed in plastic containers(box color in random), safe and easy to store.
  • High efficiency and better wear resistance than the traditional welding blade. 1 year warranty, if there is any problem, please feel free to contact us for replacement or refund..
Check Stock

2 Axis DRO Digital Readout RPM Display Magnetic Scale Encoder Set 5um Bridgeport Lathe DRO DIY Set .Travel Length Customized USA Stock

  • DIY 2 Axis DRO RPM Magnetic Scale DRO Encoder Set ,-Are you faced with not knowing how to choose the right magnetic scale encoder travel length? Tailor-made for machine tool enthusiasts, experience the fun of magnetic scale combination,-Simple operation, arbitrary assembly. Make the right Magnetic Scale via yourself for your own Lathe Mill machine.
  • Order Details : A -----Aluminum profile 2pcs 1M , -Various assembly methods ,1 .you can cut it to 2pcs short scale.eg 300mm or 900mm.600mm &900mm 2. 1pcs long scale and a short scale .eg : 1500mm & 320mm .1600mm and 300mm B , 2pcs Magnetic Scale Sensor (reading head) 5um resolution , C. Magnetic Tape & Stainless Steel Strip -2M D,End cap - 2 Pair. E.All of accessory for mounting scale ( User Manual included ) . F Digital Readout 2 Axis DRO Digital Readout RPM .Hall Sensor included.
  • Magnetic Linear Scale Advantage : Fully sealed redhead with perfect structure of the profile takes it match IP67 protection class ,life time is longer than linear glass ,Easy to cut and just its length . based on we provide 5 years warranty.
  • High Performance- 2 Axis Lathe DRO Digital Readou....
Check Stock

KCHEX 20pc 3/8' Carbide Tip Tipped Cutter Tool Bit Cutting Set for Metal Lathe Tooling

  • KCHEX’s lathe tools metal cutting are the perfect addition to your DIY and lathing tools collection. Whether you are a professional or recreational at lather, our lathe carbide bits are the perfect option..
  • Every one of our 3/8" metal lathe cutting tools in this 20 pack is made out of top tier stainless steel and carbide and has maximum quality. Our carbide lathe set is extremely durable as well as easy to use..
  • This lathe tool bits set contains 10 C2 and 10 C6 grade bits. Ultra useful for lathing steel and alloys. Simply fit them onto your lathe and create your dream designs. Purchase our carbide cutters for lathes and feel the SKEMIX difference!.
  • The carbide tipped tool bits are a great tool for your shed or tool garage. Gain a huge advantage over purchasing these carbide tips individually. Purchase the set and gain a design advantage..
  • Made out of reliable material, easy to use and clean, and providing perfect results in the garage, our carbide lathe tool tips are the way to go!.
Check Stock

Adjustable Double Bearing Live Center Revolving Center DIY Parts for Mini Lathe Machine Woodworking Tool

  • Lathe Machine DIY Parts: Mini Lathe Machine Woodworking Tool is ideal for using in domestic lathe woodworking lathe miniature car tools and other tools.spur center for wood lathe.
  • High Quality: Mini Lathe Machine Woodworking Tool is made of mental material, good heat resistance, high mechanical strength and durable.mini lathe live center.
  • Adjustable: Holing depth can be regulated and adjustment.live center for wood lathe.
  • Easy To Use: High precision, high hardness, highly efficient.wood lathe.
  • Size: Compact, easy to operate. Tip height: 27mm(appr.), Tip stretchable length: 30mm(appr.), Size: (L) x (W) 10 x 4.3 cm / 3.94" x 1.69"(appr.)..
Check Stock

Mini Lathe Wood Lathe Machine Multi-Purpose Type Lathe Milling Cutting Grinding Polishing Professional Table Top Lathe Tool Kit

  • Easy DIY woodworking lathe for woodworking Mini lathe DIY hobbyists, whether you are a beginner or have a little experience, you can quickly enjoy the fun of woodworking lathe turning and making your small wood decorative items by following our instructional tutorial..
  • ⚖Multi-purpose woodworking Mini lathe ⚖ 100W high torque motor, low noise, 7 adjustable speed (3500 rpm - 10000 rpm), can easily achieve turning, cutting, grinding, fine grinding, polishing, etc..
  • Professional woodworking Mini lathe toolsmulti-functional wood fixed chuck, professional miniature woodworking lathe turning tool, turning tool extra hard wear-resistant steel, durable within 1 years without worrying about the tool will be dull..
  • ⚖Wide range of use⚖ small woodworking Mini lathe can make wood crafts processing ceramics, pens, beads, etc., bring children to love woodworking artwork..
  • Support for beginners If you need support for woodworking Mini lathe processing, you can interact with us in the QA window on the product page and we will update the videos you need..
Check Stock