Reviews Ridgid Throat Plate

Ridgid 089290001700 Throat Plate Assembly

  • Ridgid replacement throat plate, part number 89290001700.
Check Stock

Ridgid EB44240 Oscillating Edge Belt Sander Replacement Throat Plate Adaptor # 825841

  • Throat plate part number 089036008155. Fits Ridgid miter saw models R4112, R41121 and R4113..
  • Brand New Unused Parts We have a warehouse in the US and will ship from the US, you can expect to receive your shipment within 5 days..
  • Please feel free to contact us if you have any problem.
  • Send us your range model if you would like verification that this will work on your model.
Check Stock

Bixegg 080035003093 Dado Throat Plate Insert Replacement for Ridgid R4512 Table Saw

  • Throat plate insert for dado blades # 080035003093..
  • Non original aftermarket part. Fits OEM Standards! Guaranteed to Exceed OEM Requirements!.
  • Bixegg provides High Quality Replacement Parts that are a guaranteed Exact Fit and Affordably Priced compared to the original manufacturer cost so you....
Check Stock

POWERTEC 71420 Table Saw Dado Insert Compatible with Ridgid R4512 10 inch Cast Iron Table Saw

  • INCLUDES: (1) Dado Insert for Ridgid R4512 Table Saw.
  • FUNCTION: Serves as a premium replacement for Ridgid R4512 dado throat plate (item # 080035003093).
  • DESIGN FEATURES: This solid iron insert flaunts optimal flatness for a leveled application without the hassle of making constant adjustments, plus....
  • SECURE PLACEMENT: Comes with non-countersunk adjustment holes designed to provide perfect alignment, and is held in place by a tab that clips the back....
  • REMOVABLE: Possesses a built-in a finger hole conveniently located away from the blade, allowing you to safely lift up, pull out and detach the insert....
Check Stock

Ridgid R4516 Table Saw Replacement Throat Plate # 089037006004

  • Consult owners manual for proper part number identification and proper installation.
Check Stock

Ridgid R4120 12 Compound Miter Saw Replacement Throat Plate # 089028007011

  • Consult owners manual for proper part number identification and proper installation.
Check Stock

Kobalt KT1015 Table Saw Motor Brushes Item 486267 Carbon Brush 2pcs 0486267

  • Ill-fitting dado throat plates can cause injury and equipment damage. This table saw dado throat plate will fit and lock in place like the stock....
  • Please take note that the dado throat plate looks very similar to another throat plate model. Ensure that your table saw model is listed or meets all....
  • Compatible with DeWalt 10" Portable Table Saw (DWE7490 DWE7491 DWE7491RS (Type 2) DWE7492 table saw models).
  • And with dimensions of 13 1/2" x 3 11/16" x 7/16", this throat plate is a universal fit for several 10" portable job site/contractor table saws that....
  • MADE FROM IMPACT-RESISTANT PC/PBT BLEND MATERIAL - This is no flimsy plastic. PC/PBT construction-grade material blends have high impact resistance,....
Check Stock

miter gauge,table saw miter gauge aluminum alloy precision miter gauge for table saw 5/8 slot with miter gauge fence miter gauge miter gauge jig and fixture bar miter gauge table saw accessories

  • Ill-fitting dado throat plates can cause injury and equipment damage. This table saw dado throat plate will fit and lock in place like the stock plate. Also, like the stock plate, this dado throat plate also comes with 4 adjustment screws.
  • Please take note that the dado throat plate looks very similar to another throat plate model. Ensure that your table saw model is listed or meets all specifications.
  • Compatible with DeWalt 10" Portable Table Saw (DWE7490 DWE7491 DWE7491RS (Type 2) DWE7492 table saw models).
  • And with dimensions of 13 1/2" x 3 11/16" x 7/16.
Check Stock

VF3500 Replacement Filter for Rigid Vacuums for Shop Vac Filters 3-Layer Wet/Dry 3-4.5 Gallon Fine Dust Vacuum Filters for Rigid WD3050, WD4080, WD4522, 4000RV, 4500RV

  • [Perfect Fit]: The vf3500 replacement filter fits any 3-4.5 gallon ridgid portable Wet/Dry dust filter..
  • [Compatible Models]：Compatible with Ridgid WD3050, WD4080, WD4522, 4000RV, 4500RV.
  • [Washable and Reusable]: Sturdy 3 layer pleated design are efficient in collecting most everyday dirt, drywall dust, cement dust and sawdust. More importantly, the vf3500 filter is washable and reusable, Recommended to wash with mild water and dry out for next use. It's really economic..
  • [Easy to Install]: These vf3500 filter for rigid are very easy to install and replace for the built-in filter plate design..
  • [NOTE]: 2 pack VF3500 fine dust filter fit for ridgid shop vac filter also known as ridged filter vf3500,ridgid filters vf3500, ridgid wd4050 filter..
Check Stock

[2 Pack] 12 inch x 7/8 inch x .095 inch Urethane Band Saw Tires - No Adhesive Needed - Compatible with Branded Bandsaws Including Jet Grizzly, Powermatic

  • use on 14" Band Saws and 24" Scroll Saws.Table Inserts (pack of 2). Material: Aluminum.
  • They fit Delta, Rockwell, some Jet, Ridgid, Grizzly, and other imports..
  • Make sure your insert recess has the locating pin on the side , not on the rear.
  • IMPORTANT INSTALLATION NOTE:I have sold several hundred of these and occasionally someone will have the problem of it being a bit too large. First make sure the lip of the hole is free from dirt. If a table alignment pin,is not tight or missing,often the blade mounting slot will close up some over time which reduces the insert hole diameter slightly. I tap a flat head screw driver into the blade installation slot a bit to wedge it open. That should spread the insert hole enough for it to fit.
  • Please measure your saw as some Delta & Rockwell 14" bandsaws has slightly smaller holes for the throat plate. If so some slight filing or sanding may be required..
Check Stock

Thomegoods Urethane Band Saw Tires FIts 12 inch x 7/8 inch x .095 inch No Adhesive Needed Fits for Jet Grizzly, & Powermatic

  • Please measure your saw as some Delta & Rockwell &Grizzly14" bandsaws has slightly smaller holes for the throat plate. If so some slight filing or sanding may be required.If you mind, please don't buy it..
  • Make sure your insert recess has the locating pin on the side, not on the rear..
  • use on 14" Band Saws and 24" Scroll Saws.2&1/2" X .100 thick Please measure your saws recess to ensure proper fit.
  • They fit Delta, Rockwell, some Jet, Ridgid, Grizzly, and other imports..
  • IMPORTANT INSTALLATION NOTE:I have sold several hundred of these and occasionally someone will have the problem of it being a bit too large. First make sure the lip of the hole is free from dirt. If a table alignment pin,is not tight or missing,often the blade mounting slot will close up some over time which reduces the insert hole diameter slightly. I tap a flat head screw driver into the blade installation slot a bit to wedge it open. That should spread the insert hole enough for it to fit.
Check Stock

Aoasur Replaces DWE7402DI Dado Throat Plate - Compatible with DWE7490X, DWE7491RS, DWE7499GD and DWE7491X table saw versions for construction sites - Made from Impact-Resistant PC/PBT Blend Material

  • Complete replacement of DWE7402DI Dado Throat Plate -Allows the use of stacked wallboard cutters. Like the stock plate, this dado throat plate also comes with 4 adjustment screws. This exact replacement Job site table saw dado throat plate will fit and lock in place like the stock plate..
  • Dado Throat Board can be used with DWE7490, DWE7491, and other 10” Job site table saws and can be perfectly compatible like the original board - Fits perfectly on DWE7490, DWE7491, and DWE7491RS (Type 2) table saw models ..
  • Made from impact resistant PC/PBT blend material : This is no flimsy plastic. PC/PBT construction-grade material blends have high impact resistance, dimensional stability, heat resistance, and chemical resistance. Unlike other plastic blends, PC/PBT is rigid, tough, and strong..
  • Size: Length13 1/2" x Width3 11/16" xThickness7/16"，this throat plate is a universal fit for several 10-inch portable job site/contractor table saws that have dado capabilities. It can support up to an 8-inch diameter stacked dado that is up to 13/16 inches wide..
  • Contact us: If you have any questions, please click "Contact Seller" in the "Inquiry" or "Your Order" option on our storefront..
Check Stock

Table Inserts (Pack of 3) for 14' Band saws or Scroll saws,Diameter: 2.5 in, Thickness: 0.1 in.(Please make sure this is your size)

  • Three inserts to protect your expensive blades Please measure your saw as some Delta & Rockwell &Grizzly14" bandsaws has slightly smaller holes for the throat plate. If so some slight filing or sanding may be required.If you mind, please don't buy it..
  • use on 14" Band Saws and 24" Scroll Saws..
  • 2&1/2" X .100 thick Please measure your saws recess to ensure proper fit They fit Delta, Rockwell, some Jet, Ridgid, Grizzly, and other imports..
  • Make sure your insert recess has the locating pin on the side, not on the rear.
  • IMPORTANT INSTALLATION NOTE:I have sold several hundred of these and occasionally someone will have the problem of it being a bit too large. First make sure the lip of the hole is free from dirt. If a table alignment pin,is not tight or missing,often the blade mounting slot will close up some over time which reduces the insert hole diameter slightly. I tap a flat head screw driver into the blade installation slot a bit to wedge it open. That should spread the insert hole enough for it to fit.
Check Stock