Reviews Rf Signal Analyzers

XRDS-RF KMR 400 UHF Coaxial Cable 25ft, PL-259 UHF Male to Male Connector Coax Jumper Low Loss 50 ohm Cable for AIS Antenna, VHF Marine Antenna, HAM & CB Radio, Antenna Analyzer, Dummy Load, SWR Meter

  • ⭐【Professionally Made】— XRDS-RF as a more than 20 years professional CB radio coax cable manufacturer, this kmr400 pl-259 cable for CB/ham radio, swept with USA KEYSIGHT E5071C ENA network analyzers to assure VSWR less than 1.35..
  • ⭐【Ultra-Low Loss】— The braid of this pl-259 jumper cable is high-density tinned copper and 100% shield. And it is very ultra-low loss that 3ft UHF kmr400 cable attenuates signal only by 0.26db at 500mhz. If you chose kmr400 CB coax for marine radio installations the cable had 60% less loss than the cheap rg58 at wifi frequencies..
  • ⭐【Durable Solidly Built】— This pl259 uhf male cable is with the copper clad aluminium conductor. Flexible UV proof rf-pvc jacket, designed for 20-year outdoor exposure in harsh environments. New nickel-plated rf Industries waterproof UHF connectors, make a secure connection..
  • ⭐【Prevent Coming Off】— In the UHF antennas cable we use heave pl-259 mount clamp connector, not the easy came off crimp type, the connector is solid and professionally attached..
  • ⭐【Lengthen Thickening Adhesive】— Lined Heat Shrink Tube: The pl259 cable with black heat shrink tube, the length is up to 2.2 in and use adhesive-lined heat shrink to seal the cable to UHF connector after it's asse....
Check Stock

1-600MHz RF Signal Power Meter Logarithmic Detector -74dBm to 18dBm Radio Frequency Detection

  • The detector is is used for RF signal power detection of frequency range between 1MHZ and 600MHZ.
  • It can detect a rf signal of power from -74dBm to 18dBm, and convert the RF signal into a DC voltage output.
  • The higher radio frequency signal range or power is, the higher output voltage will be.
  • output voltage is proportional to logarithm of input signal range.
  • Widely used for RF signal detection, signal power measurement, environment field strength detection, can also be used as a part of automatic gain control and automatic level control.
  • It can be made into 1mw ~ 1kw RF power meter after appropriate transformation.
Check Stock

RCA CRF907A RF Modulator - Quantity 1

  • RCA RF Modulator - Convert VGA 、AV video & audio signal to coax RF TV signal , helping combine your PC ( computer / laptop ) DVD , VCR VHS or Game Console etc. to your home theater to share the MPEG4 movies downloaded from the internet，hook up your DVD / VCR etc. VGA video devices or VHS / Game Console RCA audio & video devices with a RF splitter or large screen TVs that come with coax analog signal directly to demonstrate the multimedia documents or dispaly tv videos..
  • VGA RF Adapter - Ultra long distance signal transmission can be carried out by the included F type male to PAL male coaxial cable to achieve sharing multimedia documents , movies , videos or tv programs on multiple tv screens in diffrent rooms or farther away from the VGA / RCA source, just like working on your pc in your own room while playing entertainment videos to parents or children in another room, which is very conducive to protecting personal privacy and enjoying independent space..
  • AV & VGA to Coaxial RF Converter for TV - VGA (video signal only , not come with audio ) in + AV composite audio / video in ( An additional 3.5mm audio cable is required, which can be 3.5mm to 3.5mm, 2rca to 3.5mm or 3rca to 3.5mm )， then RF coaxial out and output only analog signals, the image....
Check Stock

YWBL-WH Logarithmic Power Detector Meter AD8317 1M-10GHz 60dB RF Power Meter Logarithmic Detector Controller for Amplifier 50 Ohms

  • AD8317 CHIP---The logarithmic power detector is designed by using AD8317 chip, and is used for RF signal power detection.
  • -55dBm to 0dBm---The logarithmic power detector can detect power in -55dBm to 0dBm of an RF signal, so that the RF signal is converted to DC voltage output.
  • APPLICATION AREAS---The logarithmic power detector could be used for RF transmitter PA set point control and level monitoring.
  • Power monitoring in a radio line transmitter.
  • RSSI measurements in base stations, WLAN, WiMAX, and radar.
  • 55dB---The greater the amplitude or power of the RF signal, the higher the output voltage, and the output voltage is directly proportional to the logarithm of the input signal amplitude, thus expanding the dynamic range of the detected signal, which ranges reach 55dB.
  • WIDE APPLICATION---The logarithmic power detector could be widely used radio frequency signal detection, signal power measurement, environmental field strength detection, or as a part of automatic gain control and automatic level control.
Check Stock

Bindpo RF Logarithmic Detector, 1M-10000MHz AD8317 Radio Frequency Logarithmic Detector Power Meter, for RF Signal Power Detection/Radio Frequency Signal Detection

  • The product is designed by using AD8317 chip, and is used for RF signal power detection..
  • Can detect power in -55dBm to -0dBm of an RF signal, so that the RF signal is converted to DC voltage output..
  • The greater the amplitude or power of the RF signal, the higher the output voltage, and the output voltage is directly proportional to the logarithm of the input signal amplitude, thus expanding the dynamic range of the detected signal, which ranges reach 55dB..
  • It can be widely used in radio frequency signal detection, signal power measurement, environmental field strength detection..
  • It can also be used as part of automatic gain control and automatic level control..
Check Stock

Portable TinySA Spectrum Analyzer, SEESII Upgraded V0.3.1 Tiny Frequency Analyzer with Antenna SMA Male to UHF Female Cables, 100kHz to 960MHz MF/HF/VHF UHF Input, 2.8'' Touchscreen Signal Generator

  • ...-in Calibration Signal Generator】When not used as Spectrum Analyzer it can be used as Signal Generator, MF/HF/VHF sinus output between 0.1MHZ-350MHz, UHF square wave output between 240MHz-960MHz. Built-in calibration signal generator that is used for automatic self test and low input calibration..
  • 【Tiny Spectrum analyzers】Switchable resolution bandpass filters for both ranges between 2.6kHz and 640kHz.Color display showing 290 scan points covering up to the full low or high frequency range. Bulit-in rechargeable battery allowing a minimum of at least 2 hours portable use..
  • 【PC Control】Connected to a PC via USB it becomes a PC controlled Spectrum Analyzer.The USB interface implements the Serial over USB (CDC) protocol and there is a large set of commands that can be invoked over the serial interface. These command can be used to perform measurements or update internal settings. The driver for Windows will install automatically after connecting to a Windows PC. The driver for Linux is built into the kernel..
  • 【Package List】1x Tiny Spectrum Analyzer.
  • 1 x SMA Telescopic Antenna.It's very useful as an antenna analyzer for your ....
Check Stock

HDMI to RF Coaxial Converter Box, 1080P Video Adapter Support Input HDMI Resolution: 480I/480P/576I/576P/720P/720I/1080I/1080P(US Plug)

  • 【HDMI to RF Converter】The RF converter can easily help you convert HDMI signal to RF signal, easy to use. HDMI to Coaxial Cable Adapter for TV. With the remote control, you can adjust the output screen and amplitude including brightness, contrast, and chroma..
  • 【HDMI Source Devices to Your Old TVs】Display DVD/game/set top box (HAMI signal source device) on normal or old TV, long distance signal transmission via coaxial cable. The converter outputs an analog signal instead of ATSC format..
  • 【How to Use it】The output TV/RF signal frequency is 61.25MHZ. Please use the search channel function of the TV to get the signal, then press "SYS" to adjust the format (PAL or NTSC) and correspond to the TV until you get clear picture and sound..
  • 【Note】The output image quality will be lower than the RF analog signal (more like 480p). This device cannot work in reverse. Support input HDMI resolution:480I/480P/576I/576P/720P/720I/1080I/1080P..
  • 【After Sales Service】If there are any using problems or unsatisfactory with our products, please feel free to contact us, our professional customer service team will consult the issues with sincerity. Thanks for purchasing from us..
Check Stock

4 Pack 3DHeaven Rechargeable 3D Glasses Compatible with EPSON ELPGS03 3-D Glasses

  • [RF 3D Glasses] The active shutter 3D glasses use RF to transmit signals, works without emitter. Compared with traditional IR signal transmission, the RF signal connection is faster, and the continuity is more stable. Pack of 2, super saving!.
  • [Compatible Devices] The RF 3D active shutter glasses suitable for most of RF 3D signal TVs and 3D projectors. Compatible 3D RF projector: EPSON, Sony, JVC, xiaomi2, Lenovo and other more.
  • Compatible 3D HD TVs: Epson, Samsung, Sony, Panasonic, Sharp, Toshiba, Konka, TCL, Haier and more. Can replace these models of 3D glasses: TDG-BT500A, TDG-BT400A, SSG-5100GB, TY-ER3D4MU, AN3DG40 and more. [PLEASE NOTE: Device before 2012 is not compatible with this remote control.].
  • [Easy to Use] Rechargeable design 3d RF glasses, with ON/OFF switch. Auto 5 seconds Stand by and 5 minutes Shut Off. Not throwaway 3D glasses. High definition, no ghosting images, no flickering, clearer and more stable than IR signal connection. Providing you a superior 3D visual experience!.
  • [Quickly Pairing] When pairing, please make sure that the distance between the 3D glasses and the 3D device is less than 19.5 inches/50 cm. Press the switch button, the green LED indicator will stay on for 3 seconds, the glasses are in the power-on state, then s....
Check Stock

AD8317 Logarithmic Detector, RF Log Detector Logarithmic Detector, Logarithmic Detector RF Signal Log Output Power Meter 1M-10000MHz Controller

  • [Main function]: This logarithmic detector is designed for ADI's AD8317 chip and is used for RF signal power detection..
  • [Detection frequency range]: The detection frequency range of the logarithmic detector is 1M-10GHz, and it can detect RF signals with a power of -55dBm to -0dBm, and convert the RF signal into a DC voltage output..
  • [Excellent performance]: The greater the RF signal amplitude or power, the higher the output voltage, and the output voltage is proportional to the logarithm of the input signal amplitude, which will expand the dynamic range of the detected signal by 55dB..
  • [Wide use]: The logarithmic detector is widely used in radio frequency signal detection, signal power measurement, environmental field strength detection, and can also be used as a component of automatic gain control and automatic level control..
  • [Stable and durable]: This logarithmic detector can withstand high and low temperatures, is stable and durable, with a temperature measurement range of 0°C to 1024°C, and a converter temperature resolution of 0.25°C..
Check Stock

Professional RF Cable TV Signal Amplifier with High 40dB Gain

  • Professional-grade cable TV and antenna signal amplifier with high 40dB output level. Supports TV coax cable signal from cable outlet, cable TV box, antenna, DTV, CCTV DVR, MATV or all other RF modulated TV system. Designed for large multi-dwelling units(MDU) that require precise RF amplification with gain and slope adjustments for a professional installation..
  • High-power amplification to compensate for the attenuations of the passive TV distribution components like cable, taps, splitters and cable outlets. Advanced CATV hybrid circuitry providing extremely low-noise figure and minimum distortion. Adjustable gain control and tilt control allows for easy system balancing..
  • Solution in solving the problems of noise, interference and weakness after distribution. Boost RF coax signal with ease for more than 1700FT or 500m if RF TV source signal has fair 70/75dB strength to start with. Boosts the existing CATV or antenna signal strength for greater distance with minimum loss for more TV distribution..
  • Adjustable gain/attenuation to reduce overdriving. Adjustable tilt compensation to allow large CATV systems to be properly balanced and mixed with other CATV or existing RF distribution system. Supports full TV frequency range from 40MHz to 860MHz for analog/di....
Check Stock

Shure PA411 Four Port Antenna Combiner

  • Distributes DC power and RF signal while reducing rack clutter for up to four PSM300 systems.
  • Features a wideband 470-865 MHz frequency range.
  • Main RF output connector connects to any antenna with a BNC connector.
  • RF LED indicators display signal present and signal overload per input.
  • Power output distributes DC power to PSM transmitters (accessory power cable required).
  • Includes PA411, rack mount and hardware kits, 1/4 wave antenna, BNC bulkhead adapter, BNC cable, power supply, power splitter cable, and user guide.
Check Stock

Richer-R HDMI to Coax RF Converter Modulator for TV, HDMI to RF Coaxial Converter Adapter Box with Remote Control, Support 480I/480P/576I/576P/720P/720I/1080I/1080P (100-240V)(US)

  • 【Converter】The RF converter can easily help you convert HDMI signal to RF signal, easy to use.The converter outputs an analog signal instead of ATSC format.Display DVD/game/set-top box (HAMI signal source device) on normal or old TV, long-distance signal transmission via coaxial cable..
  • 【Input HDMI Resolution】The output TV/RF signal frequency is 61.25MHZ. Please use the search channel function of the TV to get the signal, then press "SYS" to adjust the format (PAL or NTSC) and correspond to the TV until you get clear picture and sound..
  • 【Output Image Quality 】The Quality will be lower than the RF analog signal (more like 480p). With the remote control, you can adjust the output screen and amplitude including brightness, contrast, and chroma..
  • 【Input HDMI Resolution】Support : 480I/480P/576I/576P/720P/720I/1080I/1080P.This device cannot work in reverse..
  • 【Tip】Any questions,Please feel free contact us,we will provide you with high quality after-sales service..
Check Stock

DLP LINK 144 Hz Ultra-Clear HD 2 PACK 3D Active Rechargeable Shutter Glasses for All 3D DLP Projectors - BenQ, Optoma, Dell, Mitsubishi, Samsung, Acer, Vivitek, NEC, Sharp, ViewSonic & Endless Others!

  • [RF 3D Glasses] The active shutter 3D glasses use RF to transmit signals, works without emitter. Compared with traditional IR signal transmission, the RF signal connection is faster, and the continuity is more stable. Pack of 2, super saving!.
  • [Compatible Devices] The RF 3D active shutter glasses suitable for most of RF 3D signal TVs and 3D projectors. Compatible 3D RF projector: EPSON, Sony, JVC, xiaomi2, Lenovo and other more.
  • Compatible 3D HD TVs: Epson, Samsung, Sony, Panasonic, Sharp, Toshiba, Konka, TCL, Haier and more. Can replace these models of 3D glasses: TDG-BT500A, TDG-BT400A, SSG-5100GB, TY-ER3D4MU, AN3DG40 and more. [PLEASE NOTE: Device before 2012 is not compatible with this remote control.].
  • [Easy to Use] Rechargeable design 3d RF glasses, with ON/OFF switch. Auto 5 seconds Stand by and 5 minutes Shut Off. Not throwaway 3D glasses. High definition, no ghosting images, no flickering, clearer and more stable than IR signal connection. Providing you a superior 3D visual experience!.
  • [Quickly Pairing] When pairing, please make sure that the distance between the 3D glasses and the 3D device is less than 19.5 inches/50 cm. Press the switch button, the green LED indicator will stay on for 3 seconds, the glasses are in the power-on state, then s....
Check Stock