Reviews Retainer Cap

Chamberlain Craftsman LiftMaster Garage Door Opener Door Bracket 41A5047

  • Liftmaster, Chamberlain, Craftsman, Belt Cap Retainer Kit.
  • Includes 1 belt cap retainer and 2 screws.
  • Check the manual for your specific model number before ordering to ensure compatibility..
Check Stock

Killer Dowel Pin KDP Repair Kit Compatible with 1989-1998 Dodge Cummins 12 Valve & 24 Valve Engine 5.9BT

  • Compatible with 1989-1998 Dodge Cummins 12 valve engines 5.9BT , Replace Part Number : 3900709 , 3918673.
  • Material : Made of 6061-T6 billet aluminum and CNC anodized surface , and the socket head cap screw is made of stainless steel . Resisting rust and corrosion , meets the original specifications..
  • This kit has a reversible Dowel Pin Retainer that can be used with the VE pump engines. Comes with a stainless steel bolt that are counter bored into the tab on both sides for a clean look..
  • The dowel pin Compatible with the Cummins engine can back out of its bore. When it does, it can fall into the camshaft gear and cause all types of expensive engine damage. Because of the thickness of this retainer it will contact the timing cover before it can back out.Truly a permanent Killer Dowel Pin Fix.So you need this product..
  • Package included : 1pcs Dowel Pin KDP Repair Kit , 1pcs Stainless Steel Socket Head Cap Screw.
Check Stock

Echo Genuine Shindaiwa Oil Cap Assembly Chainsaw CS-303T / P021044580 A365000050 V581000750

  • Genuine Echo / Shindaiwa Oil Cap Assembly for Echo Chainsaws / Echo Part # P021044580.
  • Replaces Part #'s: 43600165631, 43600139232.
  • Fits the Following Echo / Shindaiwa Models: CS-303T. May Fit Some Other Models That Are not Listed..
  • Genuine OEM replacement part used on Echo chainsaws. This part keeps the fuel tank sealed and prevent gasoline from leaking. This item includes a retainer that remains in the tank to keep the fuel cap from being lost or falling on the ground. It also has an o-ring supplied with it to seal the cap. After time this o-ring will deteriorate and become brittle causing fuel to leak from the tank. It will then have to be replaced..
  • Package Qty: 1 Oil Cap Assembly. Assembly Includes: (1) P021044580 – Black Oil Cap, (1) V581000750 – O-Ring, (1) A365000050 – Cap Connector.
Check Stock

YANWEN Black Killer Dowel Pin KDP Repair Kit Compatible with Dodge 5.9BT Cummins 12 Valve & 24 Valve Engine 1989-2002

  • Fitment: 1989-1998 For Dodge Cummins 12 valve engines 5.9BT. (This kit has a reversible Dowel Pin Retainer that can be used with the VE pump engines.).
  • Hight Material: Our killer Dowel Pin KDP Repair Kit made of high quality aluminuma from solid 6061-T6 billet aluminumto ensure its durability and security, the socket head cap screw is made of iron.
  • Fuction: The dowel pin used in the engine can back out of its bore.When it does,It can fall into the camshaft gear and cause all types of expensive engine damage.Our dowel pin retainer can help your engine contact the timing cover before it can back out..
  • Other Uses: This kit has a reversible Dowel Pin Retainer that can be used with the VE pump engines..
  • Great Service Support: If any issues from our products arise please don’t hesitate to contact us. We guarantee the quality of our products and want to ensure you’re only getting the best. Because do the best we can do that and you deserve the best..
Check Stock

Hydrotools Swimline Model 71204 Replacement Drain Plug and Seal for Sand Filter Systems with 12 and 14 Inch Tanks

  • Replacement drain plug and seal found on Model 71233, 71225, 71405 and 71405T sand filter systems.
  • Includes drain plug, cap, retainer nut, rubber washers and cap seal.
  • Genuine Swimline HydroTools replacement part.
Check Stock

Rexka 15 pcs Fender Liner Bumper Cover Splash Shield Wheelhouse Liner Bolt Screw Compatible with GM 11570498 Chevrolet Camaro Colorado Corvette Cruze Equinox Silverado Malibu Traverse Cadillac Buick

  • Other Names:Wheelhouse Liner Bolt, Bumper Cover Bolt, Guide Bracket Bolt, Bumper Filler Bolt, Lower Cover Bolt, Flare Retainer, Flare Bolt, Splash Shield Bolt, Upper Cap Bolt, Lower Deflector Bolt, Lower Baffle Bolt, Bumper Cover Upper Bolt, Daytime Run Lamp Bolt, Upper Center Pillar Trim Bolt, Guide Bolt, Lower Grille Upper Bolt, Headlamp Assembly Bolt, Outer Bracket Screw, Reinforcement Bolt, Fog Lamp Assembly Bolt, Inner Grille Bolt, Side Retainer Bolt, Wheelhouse Liner Screw.
  • Other Names: Mount Bracket Bolt, Grille Assembly Upper Bolt, Corner Trim Bolt, Windshield Pillar Trim Bolt, Impact Bar Bolt, Bumper Cover Retainer, Side Impact Bag Bolt, Bumper Cover Lower Bolt, Side Cover Bolt, Center Duct Bolt, Lower Bracket Bolt, Tailpipe Extension Bolt, Absorber Bolt, Inlet Duct Bolt, Console Assembly Bolt, Upper Grille Bolt, Step Pad Bolt, Bracket Bolt, Grille Assembly Bolt, Vent Grille Bolt, Lower Absorber Bolt, Lower Support Bolt,Outer Brace Screw, Bumper Cover Screw,.
  • Replaces GM 11570498 ,Black Finish 4.2 - 1.41 x 20mm, 7mm Indented Hex Head, Loose Washer.
Check Stock

Home Right C800798 Roller Tune-Up Kit, Multicolor, 7 inches

  • HOMERIGHT PAINT ROLLER COVER: The Tune-up kit is everything you need to make your Home Right Paint Stick and Paint Stick EZ-Twist like new. Includes parts to rebuild piston and valve body with roller cover end caps and foam spacer..
  • EASY PAINT ROLLER: The new and improved Paint Stick EZ-Twist is the perfect upgrade to the original Paint Stick. Painting a room can be daunting, but the EZ-Twist easily allows you to paint and reduces the stress of painting your home.
  • PAINT ROLLER KIT COMES WITH: Includes inner end cap, foam spacer, outer end cap, outer snap cap, end cap sealant strip, Paint Stick EZ-Twist outer end cap, Paint Stick piston O-rings, Paint Stick EZ-twist piston quad-rings, duck valve, foam wiper, retainer ring and petroleum jelly.
  • : The Paint roller tune up kit with 2 years limited.
  • BEST PAINT ROLLER: With extended reach and more control, the EZ-Twist allows you to easily paint those hard-to-reach areas in your home such as stairways, hallways, and more.
Check Stock

Cruiser Accessories 19656 Hunting License Plate Frame with Fastener Caps, Matte Black/Orange

  • This frame is molded and designed to show the detail of an authentic gun with scope and bullets, the pivoting fastener caps have epoxy stickers containing one deer and one elk in the cross hairs of a scope.
  • This durable zinc die cast metal frame is matte black powder coated, the scope is detachable and the outline of orange is hand-painted To finish the look an ABS plastic black fastener cap has been added.
  • Designed to fit all standard 6x12 inch novelty/license plates.
  • Includes one (1) frame, two (2) set screws for gun and one (1) black fastener cap with a plastic cap retainer.
  • User friendly and easy to install, see back of package for installation instructions.
Check Stock

Silver Killer Dowel Pin KDP Repair Kit For 1989-1998 For Dodge Cummins 12 Valve Engines 5.9BT

  • FITMENT: Perfectly work on 1989-1998 For Dodge Cummins 12 valve engines 5.9BT..
  • SUPERIOR MATERIOR: Made of 6061-T6 billet aluminum CNC anodized Silver surface, and the socket head cap screw is made of stainless steel. Resisting rust and corrosion, ensures an unparalleled long lifespan..
  • EXCELLENT FUNCTION: The dowel pin used in the Cummins engine can back out of its bore. When it does, it can fall into the camshaft gear and cause all types of expensive engine damage. Because of the thickness of this retainer it will contact the timing cover before it can back out..
  • ALSO USE ON: This kit has a reversible Dowel Pin Retainer that can be used with the VE pump engines..
  • 100% SATISFACTION GUARANTEE - If you're not 100% satisfied with this filters, simply return it for a full refund in 30 days. Premium Support & 1 Years Warranty..
Check Stock

OEM Genuine Echo C020000040 / 39311-21030 Chainsaw Oil Cap with Retainer for CS-501 491S CS-490 CS-500P CS-501P + (Free Two e-Books)

  • Genune Echo P021044580 OEM Chainsaw Cap Assy - Black.
  • Genuine OEM replacement part used on Echo chainsaws. This part keeps the fuel tank sealed and prevent gasoline from leaking. This item includes a retainer that remains in the tank to keep the fuel cap from being lost or falling on the ground. It also has an o-ring supplied with it to seal the cap..
  • PLEASE NOTE: Check your owner's manual to be sure P021044580 is the correct replacement part for your chainsaw model..
Check Stock

Pro-line Racing 1/10 Powerstroke Rear Shocks: Short Course, PRO606301

  • Pair with the PRO606302 PowerStroke Front Shocks.
  • Injection molded, super durable spring retainer and shock ends.
Check Stock

MSD 7445 Pro Cap Cap-A-Dapt Kit

  • Largest cap available for improved spark isolation.
  • Injection molded from strong DuPont Rynite.
Check Stock

Sea Dog 324380-1 Side Vent Adjuster Kit

  • Improved push nut retainer cap with washer.
Check Stock