Reviews Resistor Sensor

DS18B20 Temperature Sensor Module Kit with Waterproof Stainless Steel Probe for Raspberry Pi

• Simplify connecting a waterproof temperature sensor to your project with this adapter module kit.
• Pull-up resistor included on the adapter module, an external resistor is not required to connect directly to the GPIO of the Raspberry Pi.
• Waterproof digital temperature sensor DS18B20 on 100cm cable with adapter module.
• Measure the temperature directly in water or soil.
• DS18B20 Wiring: Red = VCC, Yellow = Data, Black = GND.

ICQUANZX 2pcs DS18B20 Temperature Sensor Module Kit with Waterproof Stainless Steel Probe for Raspberry Pi

• Simplify connecting a waterproof temperature sensor to your project with this adapter module kit.
• Pull-up resistor included on the adapter module, an external resistor is not required to connect directly to the GPIO of the Raspberry Pi.
• Waterproof digital temperature sensor DS18B20 on 100cm cable with adapter module.
• Measure the temperature directly in water or soil.
• DS18B20 Wiring: Red = VCC, Yellow = Data, Black = GND.

Tork 3002 Photo Control, Flush Mounting, Mechanism with Gasket, 208-277V

• Photosensitive resistor GL5506/5516/5528/5537/5539/5547/5549 light detection switch sensor.
• 200PCS Light Dependent Resistor LDR 5MM Photoresistor and retail Photoconductive resistance.

GAOHOU 2 PCS DS18B20 Waterproof Digital Temperature Sensor with Adapter Module for Arduino

• The kit contains a waterproof digital temperature sensor DS18B20 and a DS18B20 adapter module..
• It can measure the temperature directly in the water. Compatible with Arduino UNO R3 / Mega2560..
• With pull-up resistor on board, the adapter module can be connected directly to most microcontrollers and it is widely used in temperature monitoring for fish tanks, equipment, machinery, greenhouses..
• You can plug the sensor onto the adapter module directory with screwing..
• Package Includes: 2X DS18B20 temperature sensor + 2 X adapter modules..

4 Sets DS18B20 Temperature Sensor Module Kit with 1 m/ 3.2 Ft Waterproof Digital Stainless Steel Probe -55 to +125 Degrees Celsius, Compatible with Raspberry Pi

• Parameter information: power supply: 3.0V - 5.5V.
• Output : red (VCC), yellow (DATA), black (GND).
• What you get: you will get 4 DS18B20 temperature sensors, 4 adapter modules and 4 female to female jumper wires.
• The adapter module has a pull-up resistor, which can be directly connected to the GPIO for Raspberry Pi without an external resistor.
• DS18B20 temperature sensor: the size of stainless steel housing is approx. 6 x 50 mm/ 0.2 x 2 inch, and the digital temperature thermal cable has a total length of approx. 1 m/ 39.4 inch, which is long enough to meet your needs.
• Quality material: the probe is made of quality stainless steel material, which is waterproof, moisture-proof and not easy to rust, so as to prevent short circuits.
• Wide application: this DS18B20 temperature sensor is compatible with Raspberry Pi, and is widely applied in temperature monitoring of cable trench, boiler, zer, agricultural greenhouse, clean room, etc..

HiLetgo 10pcs IR Infrared Obstacle Avoidance Sensor Module for Arduino Smart Car Robot 3-Wire Reflective Photoelectric for Arduino Smart Car Robot

• FLEXIBLE FORCE SENSITIVE SENSOR OFFERS EXTREME SPEED RESPONSE--The flexible sensor has the characteristics of flexible ultra-thin, and extreme speed response, etc.
• WIDELY APPLICATIONS FOR VARIETY ITEMS' DETECTING--This Force Sensing Resistor has widely applications during daily life, such as off-bed monitoring, intelligent breathing belt, sleep monitoring, electronic shelf.
• DUAL WATER-PROOF AND PRESSURE SENSITIVE FSR SENSOR--Waterproof and pressure sensitive dual function.
• DESIGNED WITH HIGHLY SENSITIVE NANO-METER MATERIAL REACHES HIGHLY SENSITIVE DETECTION--Highly sensitive flexible nano-meter materials can realize highly sensitive detection of pressure.
• GOOD DURABILITY AND HIGH EFFICIENCY FLEX/BEND SENSOR--High sensitivity and long service life.

AEM 52mm Wideband UEGO Air Fuel Ratio Sensor Controller Gauge w/White Face Kit

• X-Series Wideband UEGO AFR Controller Gauge were fastest responding wideband air/fuel ratio controllers in an independent test vs. 17 competitor wideband AFR controllers. White bezel kit included..
• Black bezel and black dual faced faceplate, silver bezel/white gauge option included..
• Factory calibrated resistor does not require free-air calibration, but technology allows for free-air calibration as sensor ages if user desires..
• Includes Bosch 4.9LSU wideband UEGO sensor. 52mm gauge diameter and slim 0.825” gauge depth..

ElecGear 8X ALPS 10K Replacement Trimmer Potentiometer for PS4, Xbox One, Elite, Switch Pro Wireless Controllers, Trim Pot Resistor Thumbstick Module Sensor for ALPS Analog Joystick

• [ALPS 10KΩ Potentiometer] – The OEM trim pot resistor was made by ALPS. It fits ALPS analog joysticks. This trimmer potentiometer works with PS3, PS4 DualShock 4 series (PS4, Slim and Pro), Xbox One series (Xbox One, One S|X), Elite Series 1 and 2, and newest Xbox Series S|X. It’s also compatible with Nintendo Switch Pro and some 3rd party controllers like ‘Scuf’ and ‘Razer Raiju Ultimate’ with 10KΩ ALPS thumbstick module inside.
• [Compatibility] – ALPS sensors come in two different resistance values. Make sure the value is around 10K ohm before ordering. Never judge its value by its color. (Be noticed: Choose 2.1KΩ version for PS5 DualSense and some rare PS4 controllers. ALPS version is not interchangeable with the orange version made by FU.).
• [Additional Resistor] – Complicated moving mechanism and daily wear and tear finally caused drifting. Even new sensors cannot be 100% balanced. Calibrating in controller settings might not work. We packed 10x correction resistors to solve the potential problem in hardware level. Solder one or two paralleled tiny resistors onto the potentiometer at the opposite direction against drifting. It will help correct 3 to 5 degrees drifting.
• [For most joystick problem] – The potentiometer sensor needs ....

Power Probe PPESTLK - Sensor Simulator Lead Kit

JANSANE SCT-013-000 100A Non-invasive AC Current Sensor Split-Core Clamp Current Transformer

• This ac current sensor used for measuring alternating current, particularly used for whole building consumption or generation..
• This split core transformer is particularly suitable for DIY use and it works well with arduino and raspberry pi..
• Use this split core current sensor to build your own energy monitor, reducing your power usage, or use it build an over-current protection device for....
• Two Form of Output: current output or voltage output (burden resistor needed to add).
• Suitable for lighting equipment, AC motors, air compressors, monitoring, current measurement and over-current protection.

CENTAURUS SCT-013-000 Split Core Current Transformer Sensor Non-invasive SCT013000 AC Current Split Core Transformer Sensor SCT-013-000 100A/50mA

• 【OPTIMAL PERFORMANCE】CENTAURUS premium upgrade SCT-013-000 Current Transformer Sensor is used for current measuring, monitoring and protection of AC motors, lighting equipment, air compressors, etc..
• 【HIGH QUALITY】CENTAURUS premium SCT-013-000 AC Current Transformer Sensor is made of high quality Ferrite material which can use for a long time.This split core current transformer is particularly suitable for DIY use and it works well with arduino and raspberry pi..
• 【MAIN SPECIFICATION】Opening size: 13mm×13mm, fully compatible with most similar products.
• The lead length is 1.5 meters, the standard Φ3.5 three-core plug output..
• 【OPTIMAL RELIABILITY】CENTAURUS SCT-013-000 AC Current Transformer Sensor has two forms of output current, voltage (voltage output built-in the sampling resistor).Non-linearity ±3% (10%～120% rated input current)..
• 【PACKAGE & SERVICE】Package Include: 1Pcs x SCT-013-000 Split Core Current Transformer Sensor .Any question Pls fell free to contact us, we will reply you within 24H.And we offer a 12 month warranty..

DUNSI SCT-013-000 Split Core Current Transformer Sensor Non-invasive SCT013000 AC Current Split Core Transformer Sensor SCT-013-000 100A/50mA

• 【HIGH QUALITY】DUNSI premium SCT-013-000 AC Current Transformer Sensor is made of high quality Ferrite material which can use for a long time.This split core current transformer is particularly suitable for DIY use and it works well with arduino and raspberry pi..
• 【MAIN SPECIFICATION】Opening size: 13mm×13mm, fully compatible with most similar products.
• The lead length is 1.5 meters, the standard Φ3.5 three-core plug output..
• 【OPTIMAL PERFORMANCE】DUNSI premium upgrade SCT-013-000 Current Transformer Sensor is used for current measuring, monitoring and protection of AC motors, lighting equipment, air compressors, etc..
• 【OPTIMAL RELIABILITY】DUNSI SCT-013-000 AC Current Transformer Sensor has two forms of output current, voltage (voltage output built-in the sampling resistor).Non-linearity ±3% (10%～120% rated input current)..
• 【PACKAGE & SERVICE】Package Include: 1Pcs x SCT-013-000 Split Core Current Transformer Sensor .Any question Pls fell free to contact us, we will reply you within 24H.And we offer a 12 month warranty..

Bourns Resistor, Bussed Resistor Network, 9, 220 Ohm, 0.02, Sip - 4610X-101-221LF

• Resistor Information: Aukenien 2w 1% metal film resistor assortment kit..
• Resistor Features: High quality resistor kit is convenient , practical, high precision and stability.Resistor kit with complete RoHS compliant are pretty popular among the electronic lovers..
• Universal Compatibility: Metal film resistor with ±1% Tolerance are suitable for almost all electrical networks and electronic circuits, from precision components in digital electronics, till measurement devices for physical quantities..
• Easy to use: Each ohm resistor individually neatly labeled for easy organization without reading color bands.Our resistor assortment kit with variety values meet all your needs..
• What You Get: 2w(2watt) metal film resistor assortment kit and Aukenien friendly customer service..