Reviews Resistive

Universal Trane American Standard 24 Volt 40 amp Relay Contactor C147094P02

  • Coil Voltage (VAC): 24 Number of Poles: 1 Motor FLA Rating at 230V (A): 40 Motor LRA Rating at 230V (A): 240 Resistive Rating at 230V (A): 50 Motor FLA Rating at 460V (A): 40 Motor LRA Rating at 460V (A): 200 Resistive Rating at 460V (A): 50 Motor FLA Rating at 575V (A): 40 Motor LRA Rating at 575V (A): 160 Resistive Rating at 575V (A): 50.
Check Stock

UltraPro 60-Minute Countdown in-Wall Timer Mechanical Switch Spring Wound No Neutral Wire Needed Single-Pole Ideal for Lights Exhaust Fans Heaters Pumps 41081 White

  • 60-Minute Countdown – The dial operation makes setting the countdown easy and fast.
  • turn the dial to provide power for up to 60 minutes.
  • Ideal Use – The in-wall timer is perfect for lights, exhaust fans, heaters, pumps and is compatible with LED, CFL and incandescent lighting.
  • Face Plates - Includes white and light almond face plates to match existing switches and fits single- or multi-gang standard and rocker plates to integrate with your home.
  • Easy to Install – The single-pole timer and no neutral wire required simplifies installation, saving you time and energy.
  • Electrical Ratings – 125VAC, 50/60 Hz 20A general/resistive, 7A tungsten, 1HP motor, 250VAC, 50/60 Hz 10A general/resistive, 2HP motor, 277VAC, 50/60 Hz, 10A general/resistive.
Check Stock

Orbit Clear Comfort Non-Programmable 83501 Thermostat

  • Easy to use - digital, push-button operation.
  • High-capacity electronic thermostat (up to 3000W @ 240V).
  • Compatible with line volt heating only (240V) including electric baseboards, convectors, radiant ceilings and fan-forced heaters.
  • TRIAC thermostat - Accuracy of 0. 15°C for maximum savings and comfort.
  • 2-Wire installation includes mounting hardware.
  • 100% silent switching - no clicking noise.
  • Power: Maximum load: 3000W @240V, 12. 5A resistive Minimum load: 500W @240V, 2A resistive.
Check Stock

Aube by Honeywell TH106/U Electric Heating 7-Day Programmable Thermostat

  • Compatible with electric baseboard, convector and fan-forced heaters. Also ideal for radiant ceilings.
  • 2000-Watt 120-Volt 16.7-Ampere resistive 60-Hertz 2-wires and SPST, 4000-Watt 240-Volt 16.7-Ampere resistive 60-Hertz 2-wires and SPST, (minimum 2-Ampere load).
  • Battery-free backup means no re-programming your schedule after power outage.
  • Timeless design complements virtually any room.
  • Dimensions (height by width by depth): 4.9-Inch by 5-Inch by 1.5-Inch.
Check Stock

Aube by Honeywell TH106/U Electric Heating 7-Day Programmable Thermostat (Renewed)

  • Compatible with electric baseboard, convector and fan-forced heaters. Also ideal for radiant ceilings.
  • 2000-Watt 120-Volt 16.7-Ampere resistive 60-Hertz 2-wires and SPST, 4000-Watt 240-Volt 16.7-Ampere resistive 60-Hertz 2-wires and SPST, (minimum 2-Ampere load).
  • Battery-free backup means no re-programming your schedule after power outage.
  • Timeless design complements virtually any room.
  • Dimensions (height by width by depth): 4.9-Inch by 5-Inch by 1.5-Inch.
Check Stock

Aube by Honeywell TI040/U 7-Day Programmable Timer

  • Ideal for pool pumps. Use the TI040 to run your pool pump for 16-hours a day instead of 24 and recover the cost of the timer in as little as a year or two.
  • Three-operating modes: Manual (conventional on and off switch), Automatic, Temporary bypass.
  • Connection: terminals for No.14 to No.10 AWG wire, multi switch (3-way) compatible, 1.5 HP 120-Volt 30-Ampere (resistive), 10-Ampere (ballast), 2 HP 240-Volt 30-Ampere (resistive), 10-Ampere (ballast).
  • Dimensions (height by width by depth): 9.4-Inch by 7.2-Inch by 3.8-Inch.
Check Stock

GeeekPi Raspberry Pi 4 TFT 3.5 inch Touch Screen with Case, Raspberry Pi Fan and Heatsinks, 320x480 Resolution LCD Display for Raspberry Pi 4 Model B (Raspberry Pi Board NOT Included)

  • This kit contains an ABS case and a 3.5 inch resistive touch screen. It’s fully compatible with Raspberry Pi 4 Model B. NOTE: Raspberry Pi Board NOT Included! The fan and screen can not be installed at the same time..
  • The 3.5 inch resistive touch screen can be directly inserted into any version of the Raspberry Pi boards, but the ABS case is only compatible with Raspberry Pi 4B.
  • The resolution of 3.5 inch touch screen can be adjusted by software.
  • The screen support 125MHz SPI signal input, the refresh rate is about 50fps which is enough to play the videos or games and display stable without flicker.
  • It supports Raspbian, Ubuntu, and Kali system, the drivers and image are provided freely..
  • Package includes: 1x ABS Case for Raspberry Pi 4B, 1x 3.5 inch TFT resistive touch screen, 1x Aluminum heatsinks, 1x Touch Pen, 1x 30x30x7mm cooling fan (NOTE: this fan can not be installed with 3.5 inch screen at the same time).
Check Stock

Honeywell PLS750C1000 The Old Ti072-3W Timer Switch with Sunrise Sunset Single or 3 Way Neutral Required

  • Single pole 3 wire (line, load, neutral).
  • Multiswitch (3-way), 4 wire (line, load, neutral, three-way).
  • Maximum Load–1800 W resistive or inductive, 1 HP motor @ 120 V.
Check Stock

Honeywell PLS750C1000 The Old Ti072-3W Timer Switch with Sunrise Sunset Single or 3 Way Neutral Required (2 Pack)

  • Single pole 3 wire (line, load, neutral).
  • Multiswitch (3-way), 4 wire (line, load, neutral, three-way).
  • Maximum Load--1800 W resistive or inductive, 1 HP motor @ 120 V.
Check Stock

Honeywell TH1100DH1004 Horizontal PRO 1000 Non-Programmable Thermostat Heat Only Dual Powered Backlit

  • Easy to use and install for home temperature control of electric heating systems.
  • TRIAC switching for accurate temperature control of +/- 1 degrees Fahrenheit.
  • Silent operation with no annoying clicking noise, making it ideal for all rooms including bedrooms.
  • Compatible with electric baseboards (120-240 volt) convectors and radiant ceiling applications with minimum load of 0. 83 A (resistive only) 200 W @ 240 VAC or 100 W @ 120 VAC and a maximum load of 8. 3 A (resistive only) 2000 W @ 240 VAC or 1000 W at 120 VAC.
  • LCD display, on-screen heating command indicator.
Check Stock

Line Voltage Mechanical Thermostat, Commercial and Residential, 120 to 240VAC

  • Price For: Each Standards: UL Height: 4-1/2 Remote Sensing Bulb Included: No Mounting Type: Standard Electrical Box Thermostat Voltage: 120 to 240VAC Depth: 1-1/2 Full Load Amps @ 240VAC: 15A Mounting Location: wall Includes: screws Color: White Remote Sensing Capability: No Contact Rating Resistive @ 120V: 22A Enclosure Type: Plastic Cover Number of Switches: 1.
  • Item: Line Volt Mechanical Tstat Thermostat Item: Line Voltage Mechanical Thermostat Thermostat Switch Type: SPST Contact Rating Resistive @ 240V: 22A Thermostat Control Range: 40 Degrees to 80 Degrees F Switch Action: Open on Rise Full Load Amps @ 120VAC: 15A Thermostat Programmable: No Control Range: 40 Degrees to 80 Degrees F Width: 3 Voltage: 120/240/277VAC Thermostat Heating/Cooling: Heating.
  • Country of Origin (subject to change): United States.
Check Stock

Leviton 5603-2TM 15 Amp, 120/277V Decora Rocker 3-Way AC Quiet Switch, 5-Pack, Light Almond

  • Switch frame shields against dust and fits in wallplate to prevent rocker binding.
  • Easy to wire, they work with tungsten, fluorescent and resistive loads.
  • Switch frame shields against dust and fits in wallplate to prevent rocker binding^Terminal screws accept up to No. 12 AGW and Quickwire push-in terminals accept No. 14 AWG solid copper wire only^Sturdy construction for long service life^Full-rated current capacity with tungsten, fluorescent or resistive loads. Motor capacity is 80% of switch rating^Complements every décor.
Check Stock

[10 Pack] BESTTEN Signature Collection Champagne Gold Decorator Wall Light Switch with Screwless Wall Plate, Single Pole, 15A 120V, UL Certified

  • Full-rated current capacity with LED, tungsten, fluorescent or resistive loads. Motor capacity is 80% of switch rating.
  • Single pole wall light switch, rating 15A 120V, UL certified.
  • Quick push-in and side wiring options available. Full-rated current capacity with LED, tungsten, fluorescent or resistive loads.
  • Easy installation. Simply attach the inner plate to the outlet/switch using the supplied screws and snap on the outer plate cover for a smooth appearance of elegance and sophistication.
  • Signature Collection wall plates are slightly larger size than standard decorator wall plates hiding paint lines and wall imperfections.
Check Stock