West System 105B Epoxy Resin (126.6 fl oz) Bundle with 206B Slow Epoxy Hardener (27.5 fl oz) and 300 Mini Pumps Epoxy Metering 3-Pack Pump Set (3 Items)
- ...l oz), 206B Slow Epoxy Hardener (27.5 fl oz), and 300 Mini Pumps Epoxy Metering Pump Set (3-Pack).
- WEST SYSTEM EPOXY: Based on 105 Epoxy Resin, West System Epoxy is a versatile low-viscosity epoxy system. It is used for boat building, composite construction and repairs that require high-strength, waterproof coating, bonding, and filling. It readily wets out fabrics and porous materials, and is easily modified for a wide range of working conditions and applications.
- NO STRONG SOLVENT ODOR: 105 Epoxy Resin is formulated without volatile solvents and does not shrink after curing. It has a relatively high flash point and no strong solvent odor, making it safer to work with than polyester or vinylester resins. Resin viscosity is approximately 1000 centipoise (cP) at 72-degree-F (22-degree-C).
- FIVE-PART RESIN TO ONE-PART HARDENER RATIO: When combined with 105 Resin in a five-part epoxy resin to one-part hardener ratio, this cured resin/206 Slow Hardener mixture yields a rigid, high-strength, moisture-resistant solid with excellent bonding and barrier coating properties. The West System 206 Slow Hardener is not intended for clear coating.
- GENERAL COATING AND BONDING APPLICATIONS: The 105/206 Epoxy Mixture is used for general coating and bonding applications whe....
Check Stock
West System 209-SB Extra Slow Hardener
- 209 EXTRA SLOW HARDENER is a low-viscosity epoxy curing agent. It is useful in a majority of hot-weather bonding situations, and when very long working time and cure time are needed. 209 Extra Slow Hardener produces a slow epoxy cure that develops physical properties gradually at room temperature. It yields a rigid, high-strength moisture-vapor resistant and functionally waterproof solid..
- USE WITH WEST SYSTEM 105 RESIN for general coating and bonding applications in extremely warm and/or humid conditions, and for extended working time at room temperature. Forms a clear, amber-colored solid with good physical properties and moisture resistance for bonding and coating applications..
- PROVIDES ABOUT TWICE the working time of 206 Slow Hardener. 209's pot life at 72°F (22°C) is 40 to 50 minutes. Pot life at 95°F (35°C) is 15 to 20 minutes. Cures to a solid state at 72°F (22°C) in 20 to 24 hours. Cure to a solid state at 95°F (35°C) in 6 to 8 hours. Reaches maximum strength at 72°F in 4 to 9 days Minimum recommended working temperature is 70°F (21°C)..
- PAIR WITH WEST SYSTEM 105-B Epoxy Resin. Blend with with WEST SYSTEM 105 Epoxy Resin at a 3-parts resin to 1-part hardener ratio..
- EASILY MODIFIED with WEST SYSTEM Fillers, Additives, and Pigments to ....
Check StockGemzeez The Original DIY Temporary Tooth Gemz Official Starter Kit TikTok The Kaplan Twins
- THE ORIGINAL TOOTH GEM KIT: Enjoy the official Gemzeez Starter Kit! Unlike our competitors, we supply enough materials for multiple uses! Gemzeez is....
- Created with the help of Dentists! Dr. Alan Kaplan DDS, has been practicing Dentistry since 1987. Our Cleansing Gel and UV Bonding Resin is Dental....
- Fun and easy application! We use genuine Swarovski Crystals to give you your best sparkle! Swarovski crystals are non-toxic and lead free!.
- Our NEW and IMPROVED 2 Step Cleansing Gel, and UV Bonding Resin formulas ensure Gemzeez will last up to 2 weeks, or even longer! Gemzeez is the most....
- Kit Includes: 6 Small Clear Swarovski Crystals, 4 Microbrush Applicators, Gemz Picker, Cleansing Gel, Dental Grade UV Bonding Resin, 1 Mini UV Light,....
Check Stock
DIY Tooth Gem Kit, Teeth Gems Kit with Glue and Light, 20 Pieces Crystals Teeth Jewelry Starter kit, Tooth Jewelry Gems Kit, Teeth Diamonds Jewel Kit
- Complete DIY kit: The tooth gem kit with curing Light and Glue, including Cotton Rolls, Bonding Resin, Gems, and UV Lights, allowing you to DIY immediately after receiving the package, the most reliable and affordable DIY kit..
- Simple And Fun Process: The easiest and safest DIY, so that customers who are not good at handwork can quickly get started..
- Reliable Materials: using the latest resin glue, the most reliable teeth diamonds, ensure tooth gems will last up to 3 weeks, or even longer. The Quality Is Guaranteed, it does not affect daily life, and you can brush your teeth or eat without falling out (because our teeth have different textures, shapes, and sizes, results may vary).
- Sufficient Materials And Diverse Functions: Provides bonding resin that can bond more than 20 diamonds, high-quality UV LED light can not only cure dental drills but also can be used for nail jewels..
- Kit includes 1 x Gem Suit, 1 x Gems Picker, 1 x UV Bonding Resin, 1 x UV Light, and 6 x Cotton Rolls..
Check Stock
LET S RESIN UV Resin Kit with Light Bonding&Curing in Seconds 25g UV Resin Kit with UV Flashlight for Welding Jewelry UV Glue Adhesive for Plastic Repair Glass Light Craft Decor
- Bonded UV Resin Kit Cured in 5-10 Seconds: LET'S RESIN UV resin for bonding has low viscosity(refer to fluency), strong adhesive, UV curable, odorless&high transparency after curing. Compared with other UV resin, it cures rapidly under the irradiation of a UV flashlight..
- Perfect Art Adhesive: Compared with traditional glue, LET'S RESIN bonding UV resin kit keeps liquid state before curing with UV flashlight, which is convenient for you to modify and shape. Provide more perfect glue for your artistic creation..
- Strong UV Resin Adhesive Tool: It can bond small ornaments with transparent objects such as resin, glass, acrylic, etc., and can also be used for welding between glass, metal and plastic. It is recommended that at least one of the two objects should be transparent for better curing..
- Easy to Use & Carry: Properly install the battery of the UV flashlight, and fix the object while the UV flashlight for irradiation and curing. UV flashlight has high energy and is easy to carry..
- Why Choose Us: With years of experience in epoxy resin, LET'S RESIN is committed to providing craft enthusiasts with tools and materials to turn imagination into reality. Strictly control product quality and attach great importance to the consumer experience. UV cure ....
Check Stock
West System 105A Epoxy Resin (32 fl oz) Bundle with 205A Fast Epoxy Hardener (7 fl oz) and 300 Mini Pumps Epoxy Metering 3-Pack Pump Set (3 Items)
- ...2 fl oz), 205A Fast Epoxy Hardener (7 fl oz), and 300 Mini Pumps Epoxy Metering Pump Set (3-Pack).
- WEST SYSTEM EPOXY: Based on 105 Epoxy Resin, West System Epoxy is a versatile low-viscosity epoxy system. It is used for boat building, composite construction and repairs that require high-strength, waterproof coating, bonding, and filling. It readily wets out fabrics and porous materials, and is easily modified for a wide range of working conditions and applications.
- NO STRONG SOLVENT ODOR: 105 Epoxy Resin is formulated without volatile solvents and does not shrink after curing. It has a relatively high flash point and no strong solvent odor, making it safer to work with than polyester or vinylester resins. Resin viscosity is approximately 1000 centipoise (cP) at 72-degree-F (22-degree-C).
- PRE-WARM THE RESIN AND HARDENER: Cold temperatures increase an epoxys viscosity, making it harder to dispense, mix and apply. Warming resin and hardener reduces their viscosity, so they flow easily through their dispensing pumps. To pre-warm, place the resin and hardener containers under a warming lamp or in a warm-water bath. Pre-warmed resins and hardeners will not cling as much to your mixing equipment.
- FIVE-PART RESIN TO ONE-PART HARDENER RATIO: Mix 205 Fast Epoxy Ha....
Check Stock
West System 105B Epoxy Resin (126.6 fl oz) Bundle with 205B Fast Epoxy Hardener (27.5 fl oz) and 300 Mini Pumps Epoxy Metering 3-Pack Pump Set (3 Items)
- ...l oz), 205B Fast Epoxy Hardener (27.5 fl oz), and 300 Mini Pumps Epoxy Metering Pump Set (3-Pack).
- WEST SYSTEM EPOXY: Based on 105 Epoxy Resin, West System Epoxy is a versatile low-viscosity epoxy system. It is used for boat building, composite construction and repairs that require high-strength, waterproof coating, bonding, and filling. It readily wets out fabrics and porous materials, and is easily modified for a wide range of working conditions and applications.
- NO STRONG SOLVENT ODOR: 105 Epoxy Resin is formulated without volatile solvents and does not shrink after curing. It has a relatively high flash point and no strong solvent odor, making it safer to work with than polyester or vinylester resins. Resin viscosity is approximately 1000 centipoise (cP) at 72-degree-F (22-degree-C).
- PRE-WARM THE RESIN AND HARDENER: Cold temperatures increase an epoxys viscosity, making it harder to dispense, mix and apply. Warming resin and hardener reduces their viscosity, so they flow easily through their dispensing pumps. To pre-warm, place the resin and hardener containers under a warming lamp or in a warm-water bath. Pre-warmed resins and hardeners will not cling as much to your mixing equipment.
- FIVE-PART RESIN TO ONE-PART HARDENER RATIO: Mix 205 Fast Epoxy Ha....
Check StockBarielle Nail Rebuilding Protein .5 ounce
- Every day activities can negatively effect and deteriorate your nails natural oils and enamel..
- Barielle’s Nail Rebuilding Protein works hard to repair the damage by bonding and strengthening weak layers of the nail together, for resilient,....
- Treats soft, thinning, peeling nails. Best used as a base coat, prior to polish..
- Helps repair damage by bonding and strengthening weak layers of the nail.
- Pregnancy Safe and adheres to 7 Free Promise (Formaldehyde, Dibutyl Phthalate, Toluene, Formadelhyde Resin, Triphenyl Phosphate, Xylene or Camphor)....
Check Stock
Capelli Lucenti 100g 7200 Pcs Italian Keratin Clear Granule Beads Hair Extension Keratin Glue Granule Pellet Granule Bead Hot Fusion Extensions Hot Melt Keratin Glue Tips for Hair Extension
- ✅ PACKAGE: The package includes 1 box of 100 g hair extension keratin glue granules, which contains about 7200 pieces. They can be applied with fusion iron connector, hair extension iron, pre-bonding hair, good for hair extension or nail extension, the abundant quantity is enough for you to use and replace.
- ✅ CAN BE USE: Can be used to bonding extensions and make micro link extensions, hot melt keratin glue tip is good viscosity resin, with strong adhesion effect..
- ✅ STRONG AND SAFE: This hot keratin glue tip is a good viscosity resin, with a strong adhesion effect, there is no carbonation in continuous use, aging resistance, less wire drawing, no odor..
- ✅ EXCELLENT PERFORMANCE: These granule beads are made from quality EVA, which is safe for use on the hair, they can melt and flow at high temperatures of 270 to 340 degrees Fahrenheit, you can use our product to create various hairstyles..
- ✅ VARIETY USAGE: These granule beads are good for bonding heat-sensitive materials, not only can be applied for grafted wigs, but also for manual, accessories, shoes, wood products, ceramics, toys, cardboard boxes, and more..
Check StockTotalBoat - 512952 - Polyester Structural Repair Putty - Marine Grade Long Strand Fiber Fiberglass Reinforced Filler for Boat and Automotive Repair Gallon Kit
- PRE-THICKENED FIBER REINFORCED POLYESTER PUTTY for high-strength structural filling, fitting, bonding, bedding & radius forming.
- MARINE FILLER has premium polyester resin and long strand glass fibers for strength, impact resistance & elasticity.
- EASY TO MIX, EASY TO APPLY: For a 100g mass, catalyze with 1% MEKP to get 15-20 min. of working time at 70°F (14 drops of MEKP per ounce of putty).
- FAST-SETTING STRUCTURAL ADHESIVE is ideal for fiberglass & gelcoat repair.
- for cosmetic fairing, overcoat Polyester Structural Repair Putty with....
- AVAILABLE IN QUART AND GALLON KITS: Includes 2 oz. MEKP. This versatile bonding compound can bond dissimilar materials and can also be used in many....
Check StockRed Label Abrasives 6 Inch 800 Grit Adhesive Back PSA Auto Body Film Sanding Discs 50-Pack
- Industrial grade materials designed for automotive (auto body paint), plastics, composites, fiberglass, marine refinishing and high gloss finishing.
- Ideal for DRY finishing | Also great for general sanding.
- Compatible with all PSA (stick on adhesive) sanders.
- Premium Heat Treated Blue Aluminum Oxide (A/O) | Ultra strong polyester (PE) film material | Resin over resin bonding.
Check StockRed Label Abrasives 6 Inch 1200 Grit Adhesive Back PSA Auto Body Film Sanding Discs 50-Pack
- Industrial grade materials designed for automotive (auto body paint), plastics, composites, fiberglass, marine refinishing and high gloss finishing.
- Ideal for DRY finishing | Also great for general sanding.
- Compatible with all PSA (stick on adhesive) sanders.
- Premium Heat Treated Blue Aluminum Oxide (A/O) | Ultra strong polyester (PE) film material | Resin over resin bonding.
Check StockExtra Large Resin Molds, 24 Inch Rectangle Epoxy Resin Silicone Tray Mold with 6 Pcs Wooden Frame for Charcuterie Board, River Table,DIY Art Home Decoration
- ...i boards, ocean tables, trays, wall decorations. Can make one-of-a-kind keepsakes or design custom functional home decorations..
- [DIY Gifts]: You can customize unique gifts for your family, friends or colleagues with large silicone tray mold, and you can also enjoy a happy bonding time with your kids and family by making supplies with DIY silicone molds. Integrate resin art into your daily life..
- [After Sales Guarantee]: Pay attention to the layered pouring resin during use and keep away from open flame objects. We are committed to providing the best quality service and products to our customers. If there is any problem with our resin molds, please feel free to contact us..
Check Stock
