Reviews Remove Dust Cap From Hub

VIRTIONZ Trailer Axle Kits with 4 on 4 Bolt Idler Hub & 1 Round BT8 Spindle -2pack

  • Trailer Axle Kits with 4 on 4" Bolt Idler Hub & 1".
  • 1,250 lb Hub Capacity, Used On 2,000 lb Axle Shaft 1 Diameter: 1 1/4" Shaft 2 Diameter: 1" Shaft Length: 8 3/4" (4" Long Stub) Hub A Diameter.: 2 1/2" Hub B Diameter: 5 1/2" Bolt Pattern: 4".
  • 2) Idler Hub with Lug Nuts, (2) 1" BT8 Round Spindle with Castle Nut, Pin & Washer, (4) Inner/Outer Bearings, (2) Double-lip Grease Seal (1 1/4" I.D. / 2" O.D.), (2) 2" Grease/Dust Cap.
  • Assembly with 4 on 4" bolt idler hub & 1" round BT8 spindle. Rated to 1,250 lbs. each or 2,000 lbs. for the pair.
Check Stock

Car Wheel Center Caps for Toyota, 9PCS 62mm/2.4'' Auto Wheel Hub Logo Caps Center Cover with Bonus 4PCS Tire Valve Cover and 1PC Keychain

  • [Fitment]An easy,cost effective and quick way to upgrade your car appearance,Elegant designs enhance the Style and Appearance of your car, Make your car stand out and be instantly recognizable!.
  • [Function Materials]Waterproof, dust-proof and rustproof materials: Aluminum ABS. Suitable for any weather. Beautifully decorated car details..
  • [Easy Installation]There is a protective film on the cover to prevent scratches. Remove the film/plastic cover before installing the hub cap. It's easy to install, just use a knife to eject the old cap and then cover it with a new one..
  • [Safety]Complete Tire Valve Cap Set – This pack of aluminum, hexagon Valve-Lock stem caps offer heavy-duty protection to ensure stability and protection when driving..
  • Compatible with vehicle type: Passenger Car.
Check Stock

Southwest Wheel R40842 42 Spindle & 8-6.5\ Bolt Circle Trailer Hub

  • Complete assembly with bearings, seal, dust cap, cotter pin and lug nuts.
  • Fits both 1" and 1-1/16" diameter straight spindles.
  • Hub measures 4-1/4 inches tall (through center of hub).
  • 2,000 lbs capacity - 1/2-20 thread - 5 bolt on 4-1/2 inch bolt circle.
Check Stock

RICH GOLD HIGHLIGHTER DUST (7 grams each container), gold highlighter By Oh! Sweet Art

  • Spray your cake evenly with your choice of powder.
  • Hold the dust pump next to the cake for dense coating.
  • Hold the dust pump away from the cake for light dusting.
  • 14 milliliter dust pump 1 inch by 3-7/16 inch overall (counting cap).
  • dust-holding chamber 1 inch by 1-11/16 inch.
  • to open 14ml dust chamber, screw it off at its fill line, but to expose sprayer top, remove small cap at the top by pulling it off.
Check Stock

iBroPrat 2 Sets Trailer Hub Kit 5 Bolt 4.5, Trailer Axle Kit for 3500 lb 5 Lug Trailer Hub with Extra Dust Cap and Rubber Plug

  • ...arts colliding with each other in the box..
  • 【LUXURY KIT WITH EXTRA ACCESSORIES】This trailer hub kit includes 32pcs accessories units such as Idler hub, L44649 outer bearings, L68149 inner bearings, etc.It even includes Shaft Nuts, Shaft Washers, Cotter Pin.WITH EXTRA 2 DUST CAPS & 4 SEALS..
  • 【HIGH QUALITY】The hub is made of high quality carbon steel.Paint the surface to prevent rust.8.6 pounds also shows how heavy it is..
  • 【SIZE & QUANTITY】1PCS Hub(5 bolt 4.5 for 3500lb), 1PCS L44649 outer bearings (I.D: 1-1/16''), 1PCS L68149 inner bearings (I.D: 1-3/8''), 5PCS Lug nuts (1/2''-20 thread), 1PCS Washer(I.D: 1"), 1PCS Spindle nuts(I.D: 1"), 1PCS Cotter Pins(L: 2.25"), 2PCS Dust cap (O.D: 1.98''), 2PCS Rubber Plug (2.56" O.D - 1.72" I.D). Please check the image..
Check Stock

[2-Pack] Trailer Axle Wheel Hub and Bearing Dust Cap 1.98 Hub with Rubber Plug Replacement for Boat Trailer 3500 Trailer Axle

  • ✔️ [Fitment] - Trailer Axle Hub Dust Cover Grease Cap with 1.98" OD..
  • ✔️ [Trailer Type] - 2000 lbs to 3500 lbs Axles.
  • ✔️ [Features] - Long Lasting Durability.
  • ✔️ [Shipping] - First Class Fast Shipping.
  • ✔️ [Quantity in Package] - 2 Pieces of Dust Cap.
Check Stock

LIBRA Set of 4 Trailer Hub Grease Seals E-Z Lube 5200-7000lbs Axle 2.25 x 3.371-22029

  • ...ing protector is vital for the bearings.
  • replacing them is always a hassle and having them allows you to drive with peace of mind that the expiration date can be long..
  • ⛵【Excellent Material】The Wheel buddies made of high quality stainless steel with maximum anti-corrosion ability. It can prevent water and dust from entering the wheel bearings causing damage. There is also a matching silicone trailer bearing dust caps. Having wheel buddies is a good way to extend the life of the bearings..
  • ⛵【Easy Installation】Installation is very easy, no need to use complicated tools, just a board to assist. Wheel buddies also has an automatic check function, you can monitor the oil level at any time by removing the trailer hub cap...
  • ⛵【Accessory Size】 Komsepor bearing protector fits 1.98 inch wheel grease cap bore (please measure your wheel bore before ordering)If you have a lawn mower, then this trailer bearing dust cap may be perfect for you!.
  • ⛵【What you get】Four rubber trailer bearing dust caps and two 1.98" bearing protectors. We offer a 100% guarantee on our bearing protectors and are committed to providing you with the best customer support. Any problems in use, just contact us and your problem will be solved within 24 hours!.
Check Stock

United Pacific Chrome Plastic 3 Bar Straight Hub Cap Spinner Only

  • ...ar enthusiasts, and the world. With over 30 years of experience, we’re dedicated to the design, manufacturing and supply of automotive products for heavy-duty trucks and classic cars.
  • UNITED PACIFIC: United Pacific has a large library of aftermarket parts and accessories from our classic car department to our trucking department. We strive to be the best and offer the best at the best cost! We take pride with our work and products, and it takes countless hours to create the best products out there! Our team is dedicated with providing you with the answers you need when ordering our products.
Check Stock

The ROP Shop Trailer Axle Kit Assembly with 4 on 4" Bolt Idler Hub & 1" Round BT8 Spindle

  • Replacement Trailer Axle Kit Assembly with 4 on 4" Bolt Idler Hub & 1" Round BT8 Spindle.
  • Specs - 1,250 lb Hub Capacity, Used On 2,000 lb Axle Shaft 1 Diameter: 1 1/4" Shaft 2 Diameter: 1" Shaft Length: 8 3/4" (4" Long Stub) Hub A Diameter.: 2 1/2" Hub B Diameter: 5 1/2" Bolt Pattern: 4". Refer to images 2 & 3 for more information.
  • Includes - (1) Idler Hub with Lug Nuts, (1) 1" BT8 Round Spindle with Castle Nut, Pin & Washer, (2) Inner/Outer Bearings, (1) Double-lip Grease Seal (1 1/4" I.D. / 2" O.D.), (1) 2" Grease/Dust Cap.
  • Assembly with 4 on 4" bolt idler hub & 1" round BT8 spindle. Rated to 1,250 lbs. each or 2,000 lbs. for the pair.
  • Fits 2,000 pound trailer axles with straight spindles, but to know if this hub is the right fit for your setup you would want to check the size your current bearings and make sure that they match up with the 1" bearings that these hubs come with as well as knowing that you have a standard length spindle. This Hub fits standard length spindles, not "short spindles".
Check Stock

SUNCARACCL 4PCS 1.98" Trailer Hub Bearing Dust Caps, Trailer Axle Dust Cap Wheel Center Caps Grease Covers with 4 Rubber Plugs for 2000 to 3500 lb Dexter EZ Lube Trailer Boat Trailer Camper RV

  • [What You Get] The package includes 4 pieces of trailer hub caps with 4 pieces of rubber plugs, enough to meet your daily use or replacement.The extra 4 rubber plugs can be used for emergency or shared with friends or relatives who have a trailer..
  • [High Quality Material]These dust caps are made of high quality carbon steel and rubber,which is strong and durable,not easy to break, deform, corrode, rust..
  • [Detailed Size]Our wheel center cap is 1.98" wide and 1.3" high,fits for most standard 2000 -3500 lb trailer wheel hub..
  • [Practical Design]The grease covers are designed with removable rubber plug,easy to install and replace.It can effectively protect your trailer hub from dust for longer lasting use..
  • [Satisfaction Guarantee]Unconditionally refund or free replace if defective or any quality problems. Any problem please feel free to contact us, we offer life-time friendly customer service..
Check Stock

The ROP Shop Pack of 4 Trailer Axle Kits with 4 on 4 Bolt Idler Hub & 1 Round BT8 Spindle

  • Replacement (Pack of 4) Trailer Axle Kits with 4 on 4" Bolt Idler Hub & 1" Round BT8 Spindle.
  • Specs - 1,250 lb Hub Capacity, Used On 2,000 lb Axle Shaft 1 Diameter: 1 1/4" Shaft 2 Diameter: 1" Shaft Length: 8 3/4" (4" Long Stub) Hub A Diameter.: 2 1/2" Hub B Diameter: 5 1/2" Bolt Pattern: 4". Refer to images 2 & 3 for more information.
  • Includes - (4) Idler Hub with Lug Nuts, (4) 1" BT8 Round Spindle with Castle Nut, Pin & Washer, (8) Inner/Outer Bearings, (4) Double-lip Grease Seal (1 1/4" I.D. / 2" O.D.), (4) 2" Grease/Dust Cap.
  • Assembly with 4 on 4" bolt idler hub & 1" round BT8 spindle. Rated to 1,250 lbs. each or 2,000 lbs. for the pair.
  • Fits 2,000 pound trailer axles with straight spindles, but to know if this hub is the right fit for your setup you would want to check the size your current bearings and make sure that they match up with the 1" bearings that these hubs come with as well as knowing that you have a standard length spindle. This Hub fits standard length spindles, not "short spindles".
Check Stock

The ROP Shop (Pack of 2) Trailer Axle Kits with 4 on 4" Bolt Idler Hub & 1" Round BT8 Spindle

  • Replacement (Pack of 2) Trailer Axle Kits with 4 on 4" Bolt Idler Hub & 1" Round BT8 Spindle.
  • Specs - 1,250 lb Hub Capacity, Used On 2,000 lb Axle Shaft 1 Diameter: 1 1/4" Shaft 2 Diameter: 1" Shaft Length: 8 3/4" (4" Long Stub) Hub A Diameter.: 2 1/2" Hub B Diameter: 5 1/2" Bolt Pattern: 4". Refer to images 2 & 3 for more information.
  • Includes - (2) Idler Hub with Lug Nuts, (2) 1" BT8 Round Spindle with Castle Nut, Pin & Washer, (4) Inner/Outer Bearings, (2) Double-lip Grease Seal (1 1/4" I.D. / 2" O.D.), (2) 2" Grease/Dust Cap.
  • Assembly with 4 on 4" bolt idler hub & 1" round BT8 spindle. Rated to 1,250 lbs. each or 2,000 lbs. for the pair.
  • Fits 2,000 pound trailer axles with straight spindles, but to know if this hub is the right fit for your setup you would want to check the size your current bearings and make sure that they match up with the 1" bearings that these hubs come with as well as knowing that you have a standard length spindle. This Hub fits standard length spindles, not "short spindles".
Check Stock

The ROP Shop (Pack of 8) Trailer Axle Kits with 4 on 4" Bolt Idler Hub & 1" Round BT8 Spindle

  • Replacement (Pack of 8) Trailer Axle Kits with 4 on 4" Bolt Idler Hub & 1" Round BT8 Spindle.
  • Specs - 1,250 lb Hub Capacity, Used On 2,000 lb Axle Shaft 1 Diameter: 1 1/4" Shaft 2 Diameter: 1" Shaft Length: 8 3/4" (4" Long Stub) Hub A Diameter.: 2 1/2" Hub B Diameter: 5 1/2" Bolt Pattern: 4". Refer to images 2 & 3 for more information.
  • Includes - (8) Idler Hub with Lug Nuts, (8) 1" BT8 Round Spindle with Castle Nut, Pin & Washer, (16) Inner/Outer Bearings, (8) Double-lip Grease Seal (1 1/4" I.D. / 2" O.D.), (8) 2" Grease/Dust Cap.
  • Assembly with 4 on 4" bolt idler hub & 1" round BT8 spindle. Rated to 1,250 lbs. each or 2,000 lbs. for the pair.
  • Fits 2,000 pound trailer axles with straight spindles, but to know if this hub is the right fit for your setup you would want to check the size your current bearings and make sure that they match up with the 1" bearings that these hubs come with as well as knowing that you have a standard length spindle. This Hub fits standard length spindles, not "short spindles".
Check Stock