Reviews Relay With Shunt

Rod Stewart Ziggy Stardust Punk David Bowie English Rock Roll Wig Color Forest Green - Lacey Wigs Bundle with MaxWigs Costume Wig Care Guide

  • The Lynx Shunt VE.Can is an intelligent 1000 amp shunt with location for a fuse (not included), the built-in battery monitor accurately monitors the state of charge of your battery.
  • The Lynx shunt contains a positive bus-bar with space to mount a CNN fuse and a negative bus-bar with a shunt.
  • It also contains battery monitoring electronics - The built-in battery monitor accurately monitors the state of charge of your battery.
  • Victron Energy Smart Battery Sense Long Range (up to 10m).
  • Incorrect installation can be hazardous, Please consult a licensed professional and follow all applicable electrical codes during installation.
Check Stock

LightKeeper Pro® Incandescent Light Set Repair Tool

  • LightKeeper Pro fixes most incandescent light sets in seconds with the squeeze of the trigger.
  • LightKeeper Pro's Quick Fix Method repairs the #1 cause of light set failure known as a Shunt Issue (internal bulb failure).
  • When the Quick Fix Method doesn't do the trick because the light set does not have a Shunt Issue, you can use the Audible Voltage Detector to locate the interruption in the circuit.
  • Includes Bulb Tester, Fuse Tester, Bulb Puller, Storage Compartment for spare bulbs & fuses, 10 clear replacement bulbs (2.5V, 170mA).
  • Even includes Batteries (1.5 Volt Alkaline).
Check Stock

UNI-T UT210E Pro Mini Digital Clamp Meter, Auto Ranging TRMS Backlit VFC NCV Meter, AC/DC Current Voltage Frequency Resistance Capacitance Diode Tester with Test Leads Zip Bag

  • About CG:CG ammeter shunt is made of high quality brass and Manganin, is Sanded to make more shiny , sealing treatment to be used for a long time..
  • relative humidity:less than or equal to 95% (35℃)..
  • Temperature Rise:20ppm,When the change of temperature tends to be stable,if rated current is below 50%, the temperature will be not higher than 80℃,if rated current is above 50%, the temperature will be not higher than 120℃..
  • Over-load ability:rated current 120%, 2 hours.It is not recommended that the practical used current over the 80% of rated current for a long time..
Check Stock

DaierTek 12V Fuse and Relay Box 6 Slots Relay Block 6 Slots ATC/ATO Fuse and Relay Block with Relay Universal Waterproof Fuse and Relay Box Kit for Automotive Car Truck Marine Boat

  • Large Capacity Relay Holder – This relay box is 6 slots relay panel design, which includes 5 slots for 5 pin Bosch style relays, 1 slot for RTT7121 4 pin relay..
  • ATC/ATO Fuse Relay Box – This fuse block with relay is also 6 slots relay holder design for ATC/ATO fuses, which makes the fuse relay become safer when use..
  • Suitable Terminals – This 12v relay box will also come with terminals for relays and fuses, which will enables you to install and use the fuse and relay box at once..
  • Top & Bottom Cover – This relay box 12v automotive will come with a top cover and a bottom cover, which makes the relay fuse box become a waterproof relay box..
  • What you get – 1 x Fuse Relay Block with Top and Bottom Cover, 5 x Bosch Style 5 Pin Relay, 1 x RTT7121 4 pin relay, 16 x Blade Fuses(4 x 10A, 4 x 20A, 4 x 25A, 4 x 30A), 41 x Metallic Terminals, 1 Year Warranty. Feel free to contact us if confused..
Check Stock

Electronic Specialties 191 Relay Buddy Pro Test Kit

  • Kit includes Relay Buddy tester, 5 new relay adapters and blow mold case.
  • Relay Buddy is a quick go/no go tester for the most common automotive relays.
  • With the included adapters, Relay Buddy now tests 5 different relay types and also tests shielded relays.
  • Relay Buddy will fail the relay and light the red LED if any of the test cycle proves unsuccessful during the test session.
  • Settable to 4 and 5-pin relay and uses vehicle's 12 volts battery for power.
Check Stock

ATD Tools 5614 Relay Circuit Tester

  • Able to test an entire circuit - from battery to component, including the relay With this item the technician can jump a relay.
  • do an AC charge from the relay by activating the compressor.
  • do compression testing by activating the starter relay and even check turn signals or lights from the front of the car.
  • Allows the technician to diagnose the problem without the use of a multimeter.
  • The lighted display shows the technician the problem immediately.
  • With this item the technician can jump a relay.
  • Includes: (1) Tester, (6) popular Relay Leads, and (1) Universal Relay Lead.
Check Stock

SainSmart USB 4 Channel Relay Automation (5V)

  • NOYITO 2-Channel Micro USB Relay Module is equipped with a stable USB to serial port chip and a microcontroller. It can use the serial port debugging software to send serial commands on the computer to control the opening and closing of the 2-channel relay..
  • Onboard high performance microcontroller chip, CH340 USB control chip.With power LED indicator and relay status LED.On-board 2-channel 5V, 10A/250VAC, 10A/30VDC relay, long relay life, can work 100,000 times continuously..
  • Module with overcurrent protection and relay diode freewheel protection..
  • NOYITO 8-Channel Micro USB Relay Module ASIN：B09RGTSHHW.
  • NOYITO 4-Channel Micro USB Relay Module ASIN：B09RGVQXXT.
Check Stock

4Pcs INA219 I2C Bi-Directional DC Current Power Supply Sensor Breakout Board Module I2C IIC Interface

  • INA219 module is an I2C interface with a drift, bi-directional current / power monitor integrated circuit (IC), and further expand the energy-saving....
  • INA219 I2C Bi-directional DC Current Power Supply Sensor, Working Voltage 3~5V.
  • INA219 module small size, low cost, high accuracy. It not only can monitor the voltage drop across a shunt resistor on the sensing shunt supply....
  • INA219 can be achieved within the maximum error accuracy of +1% from -40° C to 85° C temperature range, the maximum offset is 100 uV. The....
  • Appliaction:The module is used for I2C port zero drift / bidirectional current / power monitoring sensor module. The device is available in a SOT23....
Check Stock

ONLINE LED STORE RTT7121A 12V 40A 4-Pin Relay [Direct Replacement] [Mechanical Relay] [Single Pole Single Throw] - Replacement for Toyota 90987-02006 OEM Relay

  • DIRECT RELAY REPLACEMENT- Our 4-pin relay is a direct factory replacement for the Toyota 90987-02006 OEM relay only priced more attractively..
  • EASY & AFFORDABLE MAINTENANCE- Keep your Toyota or Lexus vehicle running at its best with this plug & play replacement relay.
  • OEM-STYLE QUALITY- Manufactured to the same quality standards as the Toyota 90987-02006 relay, the OLS RTT7121A 12V 40A 4-Pin Relay delivers OEM-style quality..
  • COMPATIBLE WITH POPULAR TOYOTA & LEXUS CARS- Fits popular Toyota models: 1986-1991 Camry, 1995-2007 Corolla Sedan, 1990-1999 Previa, 1994-1997 RAV4, 1984-1997 Tercel, and much more..
  • COMPATIBLE WITH OLS 12-SLOT RELAY BOXES- This 12V 40A 4-pin relay is also compatible with our 12-Slot Relay Box (PSZACCEPS142R)..
Check Stock

Electronic Specialties 193 Black 2.5' x 5' 12/24V Diagnostic Relay Buddy Pro Test Kit

  • Tests 5 different relays, both 12V and 24V and 3 diagnostic trouble codes help define the cause of the bad relay.
  • Kit Includes 5 Relay Adapters and blow mold case.
  • Fails bad relays - Good/Bad indication, green light for PASS, red light for FAIL with flashing trouble code.
  • Tests 5 different relays, both 12V and 24V.
  • 3 diagnostic trouble codes help define the cause of the bad relay.
  • #193 Kit Includes 5 Relay Adapters and blow mold case.
  • Quick off-the-car relay tester - checks relay coil & switch contacts.
Check Stock

Edwards Signaling 7005-G5 Door Annunciator

  • ☆☆With six independent relay switches, and by dialing its mobile phone number to activate the NO.1 relay switch, it will reject the call and turn on the connected device without answering, so it will not generate when dialing this machine Call charges, it will identify the authorized phone number that is calling, and refuse to answer the call without answering. It has 5 other independent relay switches, which can be turned on or off by sending SMS text to GSM‑RELAY6..
  • ☆☆6‑channel 250V 10A 50Hz relay contact, the relay can operate almost all equipment, optional relay working mode. Has 6 alarm inputs. When the input is shorted to GND, an alarm will be triggered and an alarm message will be sent..
  • ☆☆One relay output with call mode and the other relay output with SMS control can be easily programmed with mobile phone or PC software. SMS can be used for digital programming quickly and conveniently through SMS or on‑board quick teach button..
  • ☆☆Support free control mode or security authorization number control mode, support custom commands, easy to understand. Optional password to keep the system in safe operation mode, support remote password operation and password change..
  • ☆☆Applications include remote control of heating of holiday ....
Check Stock

AEDIKO 4pcs DC 5V Relay Module 2 Channel Relay Board with Optocoupler Support High or Low Level Trigger

  • Normally Open Interfaces Maximum Load : AC 250V/10A, DC 30V/10A.
  • 2 Channel Relay Module 5V Comes with High-Current Relay,Trigger Current : 5mA.
  • 5V Relay Module is 2 Channel Isolated, Each Relay Can Individually Switch On/Off by An Opto-Isolated Digital Input.
  • Relay Module Designed With Fault-Tolerant , Even If The Control Line Breaks, The Relay Will Not Move.
  • With Optical Coupling Isolation,Triggering More Reliable and Stable.
  • 2 Channel Module Equipped With Screwed Terminal Plate and Fixed Bolt Holes,Standard Interface Can Connect With Microcontrollers and be Controlled by a Wide Range of Microcontrollers.
Check Stock

AITRIP 8 Pack 3V 1 Channel Relay Power Switch Module with Optocoupler Opto Isolation High Level Trigger for IOT ESP8266 Development Board

  • 【30VDC 250VAC Load】 Equiped with high-current relay, AC250V 10A.
  • DC30V 10A, each relay has normally open and normally closed contact. Can be selected by jumper relay and TTL or ground..
  • 【High Level Trigger】The relay module is triggered by high level signal, which can be input from microcontroller IO..
  • 【 3V/3.3V power relay module】- This Relay Board provides a single relay that can be controlled by any 3V/3.3V digital input from your microcontroller IO..
  • 【Wide Application】- These 3v relay board works well with ARM /PIC /AVR /MCU/Raspberry/CNC machine/ PS4/3.3V /NodeMCU/ ESP8266 module etc..
  • 【Long Life】 - Fast response time less than 20ms and long lifetime up to 100,000 times snap action with diode freewheel protection..
Check Stock