Reviews Reinforced Fiberglass Disc

Dorman 14505 Clutch Alignment Tool Compatible with Select Models

  • OTC's 10-Spline Truck Clutch Alignment Tool is designed for use when installing heavy-duty single, two-plate, push/pull, manual, and self-adjusting clutches.
  • Tool is constructed of lightweight fiberglass-reinforced nylon that won't hang up in clutch disc splines.
  • Rugged construction will easily support the weight of heavy clutch discs.
  • To use, loosely install clutch disc and pressure plate on flywheel then insert alignment tool through the clutch into the bearing, center disc, then tighten pressure plate to spec.
  • 2 inch O.D. shaft, 1-1/4 inch pilot, 10 splines, splines are 3.6 inches long.
Check Stock

ClutchXperts SPC Clutch Alignment Tool KIT Compatible With 2006-2015 Mazda MX-5 Miata 2.0L 6-Speed

  • OTC's 10-Spline Truck Clutch Alignment Tool is designed for use when installing heavy-duty single, two-plate, push/pull, manual, and self-adjusting clutches.
  • Tool is constructed of lightweight fiberglass-reinforced nylon that won't hang up in clutch disc splines.
  • Rugged construction will easily support the weight of heavy clutch discs.
  • To use, loosely install clutch disc and pressure plate on flywheel then insert alignment tool through the clutch into the bearing, center disc, then tighten pressure plate to spec.
  • 2 inch O.D. shaft, 1-1/4 inch pilot, 10 splines, splines are 7.3 inches long.
Check Stock

WORKPRO 20-Pack Flap Discs, 4-1/2-inch, Arbor Size 7/8-inch, T29 Zirconia Abrasive Grinding Wheel and Flap Sanding Disc, Includes 40/60/80/120 Grits

  • ...othing or finishing, to rust removal and more - perfectly offers all you need for your projects.
  • ✅ Extreme Durability and Value – Made of hard zirconia alumina material which lasts longer than standard aluminum oxide abrasive material, built for a more robust and economical grinding wheel.
  • ✅ T29 Flap Discs with Fiberglass Backing Plate - T29 flap disc features angled flaps, which can be used for edge-working or contoured applications. These discs are also designed with a greater surface area than flat type for stock removal on horizontal surfaces. Fiberglass creates a strong bond with adhesives and does not contaminate the working surface. Fiberglass backing plate can effectively absorb vibration and bring more stable & efficient grinding.
  • ✅ Great Performance - Each 4.5" x 7/8-Inch arbor size flap disc is compatible with angle grinders operatable of up to 13,000 RPM. Our flap disc set make it ideal for high performance blending and stock removal on metals non-ferrous materials, fiberglass, plastics, woods and other uneven surfaces..
Check Stock

LUCKUT  Flap Disc Grinding Wheels 4-1/2 Inch Flap Sanding Wheel Abrasive Wheels & Discs 4.5'' x 1/4'' x 7/8'' Aluminum Oxide Grinder Wheel for Angle Grinder-10 Pack (40#)

  • ✅ Meet All You Need – This premium flap disc set includes 10 pieces of 40 grit, which can be used for universal applications, ranging from metal or woodworking, concrete grinding or finishing, stone smoothing or finishing, to rust removal and more - perfectly offers all you need for your projects.
  • ✅ Extreme Durability and Value – Made of hard zirconia alumina material which lasts longer than standard aluminum oxide abrasive material, built for a more robust and economical grinding wheel.
  • ✅ T29 Flap Discs with Fiberglass Backing Plate - T29 flap disc features angled flaps, which can be used for edge-working or contoured applications. These discs are also designed with a greater surface area than flat type for stock removal on horizontal surfaces. Fiberglass creates a strong bond with adhesives and does not contaminate the working surface. Fiberglass backing plate can effectively absorb vibration and bring more stable & efficient grinding.
  • ✅ Great Performance - Each 4.5" x 7/8-Inch arbor size flap disc is compatible with angle grinders operatable of up to 13,000 RPM. Our flap disc set make it ideal for high performance blending and stock removal on metals non-ferrous materials, fiberglass, plastics, woods and other uneven.
Check Stock

BOSCH RSM5046 5 In. Hard Hook-and-Loop Multi-Hole Sanding Pad

  • Multi-hole sanding disc design – optimized for enhanced dust extraction and compatible with a wide variety of abrasive discs.
  • Hard pads – ideal for sanding in-between two coatings and renovation varnish removal.
  • Professional design – features fiberglass-reinforced backing plate and precision-punched-and-riveted aluminum drive plate.
  • Robust manufacturing – delivers superior performance and long life.
  • Built for multi-hole sander – designed for use with abrasive discs and polishing bonnets for the 5 In. Bosch GET65-5 Dual-Mode Random Orbit Sander.
Check Stock

BOSCH RSM6045 6 In. Medium Hook-and-Loop Multi-Hole Sanding Pad

  • Multi-hole sanding disc design – optimized for enhanced dust extraction and compatible with a wide variety of abrasive discs.
  • Medium pads – ideal for sanding in-between two coatings, fine sanding and lacquer repair work.
  • Professional design – features fiberglass-reinforced backing plate and precision-punched-and-riveted aluminum drive plate.
  • Robust manufacturing – delivers superior performance and long life.
  • Built for multi-hole sander – designed for use with abrasive discs and polishing bonnets for the 6 In. Bosch GET75-6 Dual-Mode Random Orbit Sander.
Check Stock

BOSCH RSM5045 5 In. Medium Hook-and-Loop Multi-Hole Sanding Pad

  • Multi-hole sanding disc design – optimized for enhanced dust extraction and compatible with a wide variety of abrasive discs.
  • Medium pads – ideal for sanding in-between two coatings, fine sanding and lacquer repair work.
  • Professional design – features fiberglass-reinforced backing plate and precision-punched-and-riveted aluminum drive plate.
  • Robust manufacturing – delivers superior performance and long life.
  • Built for multi-hole sander – designed for use with abrasive discs and polishing bonnets for the 5 In. Bosch GET65-5 Dual-Mode Random Orbit Sander.
Check Stock

LotFancy Stripping Disc, 6PCS 4 1/2” x 7/8” Quick Easy Strip and Clean Discs, Paint and Rust Remover Stripper for Angle Grinder, Silicon Carbide Abrasive Wheel for Wood Metal Fiberglass, Purple

  • PREMIUM SILICON CARBIDE ABRASIVE: Each abrasive strip disc made from durable silicon carbide and bonded with strong fiberglass backing.
  • Long lasting uniform grinding effect and improved cut rate.
  • CLOG-RESISTANT & DURABLE: Stripping wheel with non-woven nylon webbing for effective, clog-resistant grinding.
  • Fiberglass backing to absorb vibration and offer additional durability and reinforcement.
  • PAINT AND RUST REMOVER: Strip disc removes rust, paint, weld spatter, oxidation and coatings quickly and effortlessly, without damaging the original surface.
  • -Purple strip discs have the longest service life and highest efficiency than the black and blue strip discs.
  • DESIGNED FOR ANGLE GRINDERS: 4.5” Strip disc with 7/8" arbor fits angle grinder paint stripper. Note - DOES NOT FIT Wagner paint eater.
  • WIDE USE: Paint stripper is used for surface preparation, conditioning and finishing on metal, fiberglass, wood.
Check Stock

PRVEW 50-Pack Die Grinder Cut Off Wheel 3 Inch, 3"x1/16"x3/8"Quality Cutting Wheel Cutting Disc for Metal&Stainless Steel

  • [Size Specification] - The PRVEW cut off wheel 3 x 3/8 Inch is perfectly compatible for all 3" portable die grinders and angle grinders with 3/8" arbor.
  • Thickness:1/16 inch(1.6mm), Operating up to 20300 RPM 80M/S..
  • [Reliable&Safe Discs] PRVEW metal cutting disc is reinforced by double fiberglass meash,complying with international standards and safety requirements such as EN 12413,.
  • [Long Lasting Discs] PRVEW metal cutting disc is made of premium aluminum oxide grain, for which provides aggressive cutting action and durable long service life.
  • [Great Performance] The thin design of 1/16 inch thickness cutting off wheels provides fast, precise, and clean cutting performance with minimal burrs and material waste..
  • [Multi-Applications] PRVEW 3-inch cutting discs compatible with Die Grinder, Air Cut Off Tool and Electric Cut Off Tool. and are very suitable for super-fast, clean cutting in carbon steel, stainless steel, iron, copper, and other ferrous metals..
Check Stock

15pcs Multifunction Flap Discs & Grinding Polishing Discs Set with 4.5\ x 7/8\ 40/60/80/120 Assorted Grits Flap Sanding Disc Strip Disc Nylon Disc and Felt Polishing Flap Disc for Angle Grinder

  • ...g all kinds of surface conditions. The paint strip disc removes rust, paint and coatings quickly and easily, without damaging the original surface..
  • 【PREMIUM MATERIAL】The flap disc made from premium high density calcined aluminum oxide. Easily remove rust, paint, scale and oxidation. Suitable for wood, metal and fiberglass. Fiberglass backing plate can effectively absorb vibration and bring more stable & efficient grinding. So good toughness and polishing effect, High efficiency, long service life..
  • 【STANDARD SIZE】Outer Diameter: 115mm/4.5in ,Inner Diameter: 22mm/7/8in. Fit for most angle grinders. Its recommended ideal speed is 3000 RPM with a MAX RPM of 13300..
  • 【WORRY-FREE SERVICE】We are so confident in our product that we offer a 1-year warranty for every customer. Enjoy your shopping and feel free to contact us!.
Check Stock

Man of La Mancha

  • ✅ Meet All You Need – This premium flap disc set includes 10 pieces of 40 grit, 5 pieces of 60 grit, 3 pieces of 80 grit and 2 pieces of 120 grit,....
  • ✅ Extreme Durability and Value – Made of hard zirconia alumina material which lasts longer than standard aluminum oxide abrasive material, built....
  • ✅ T29 Flap Discs with Fiberglass Backing Plate - T29 flap disc features angled flaps, which can be used for edge-working or contoured applications.....
  • ✅ Great Performance - Each 4.5" x 7/8-Inch arbor size flap disc is compatible with angle grinders operatable of up to 13,000 RPM. Our flap disc set....
Check Stock

101PCS Power Rotary Tool Cutting Wheels, Resin Cutting Discs 1/8inch Mandrel Fiberglass Reinforced Cut Off Wheel

  • 101pcs Fiberglass Reinforced Cut Off Wheel with 1 Mandrels Included (1/8 inch Shaft Fits Standard Rotary).
  • This is a cut-off disc - only cuts along its edge. Ideal for cutting, grooving and cutting all kinds of metal and fine wood, plastics and ceramics.
  • With low heat generation and thin cutting line, the cut off wheels are applicable to electric drills, hanging grinders, electric grinders, etc..
  • Keep a light touch, as the wheel will break under a lot of pressure.
  • They can be used to cut metal, plastic, chassis modification, thin metal circuit board and DIY production after connected with mandrels, and are ideal for olive cutting..
Check Stock

AuInn 14 PCS Abrasive Flap Wheel Sander Set, 80 Grit Sanding Wheel Assortment Kit, Including Cone Shape and Flap Wheel, 6 mm Shank (7 Kinds Each 2 PCS)

  • Designed for use with your angle grinder or high speed cutter, wheel design for fast burr free cutting easy and smooth..
  • Keep a light touch, as the rotary tool metal cutting disc wheel will break under a extreme pressure..
  • The cut-off wheel is reinforced with fiberglass for increased durability and used for cutting metal including hardened steel..
  • Ideal for cutting, grooving and trimming all kinds of metal.
Check Stock