110V 340W 3 Speed Heavy Duty Bench Drill Press Mini Workshop Mounted Drilling Chuck Bench Table Drill for Wood Plastic Plate and Another Non-Hard Material Drilling
- ★【High Quality】 High quality drilling, easy operation, good stability.
- ★【High Efficiency】Great speed, low noise, long life drilling no swing, drill breakage rate is very low, high efficiency..
- ★【Speed Regulation】 With speed regulating switch, speed can be adjusted easily..
- ★【Plate Drilling】Mainly used for wood, plastic plate, a resin plate, aluminum, composite panels and another non-hard material drilling..
- ★【Manual】Can also be used for DIY furniture, work easily, drilling holes more accurately..
Check StockSlendor Magnetic Stirrer SH-2 Hot Plate Mixer Max 520℉ Lab Hotplate Stirrer 2000 RPM Stir Plate with Thermometer, Stirrer Bar and Support Stand
- Adjustable Stirring Speed -- There is a speed regulating device at the bottom of the SH-2 magnetic stirrer hot plate. Rotate clockwise to increase the stirring speed, and counterclockwise to decrease. Adjust as needed. The max stirring speed is up to 2000RPM..
- Rapid Heating -- Heating Power: 180W, Max Temp: 520°F. The magnetic hotplate stirre can stirrer and heat at the same time. Included 1 inch Teflon coated magnetic stirrer bar and thermometer, which can be used to display the temperature during use..
- Advanced Material -- The magnetic stir plate is made of advanced materials, resistant to high temperature, abrasion, and chemical corrosion. Each stir hot plate stirrer has been tested and inspected, and the quality is guaranteed..
- Widely Used -- The magnetic heated plate is suitable for scientific research institutions, industry, agriculture, laboratories and universities. Tips: work continuously for 4 hours in high-speed state and 8 hours in medium-speed state..
- Quality Assurance -- The professional magnetic hotplate stirrer has undergone strict quality inspection and can operate stably for long time. If you have any questions about the lab hot plate, please contact the seller customer service at any time..
Check Stock3 Speed Mini Drill Press Machine 340W Mini Electric Bench Table Drill For Craft Jewelers & Hobbyists Benchtop Drilling Machine
- ✔3 Variable speeds per minute: I:0-8000r/min, II: 0-11000r/min, III:0-16000r/min..
- Drilling Diameter: 0.6-6.5 mm / 0.02-0.26inch..
- ✔Mainly used for wood, plastic plate, a resin plate, aluminum, composite panels and another non-hard material drilling. Can also be used for DIY furniture, work easily, drilling holes more accurately..
- ✔High quality drilling, easy operation, good stability. With speed regulating switch, speed can be adjusted easily..
- ✔Great speed, low noise, long life drilling no swing, drill breakage rate is very low, high efficiency..
Check StockAmazon Essentials Men's Classic-Fit Wrinkle-Resistant Flat-Front Chino Pant (Available in Big & Tall), Khaki Brown, 36W x 34L
- ★ High quality drilling, easy operation, good stability.
- ★ Great speed, low noise, long life drilling no swing, drill breakage rate is very low, high efficiency..
- ★ With speed regulating switch, speed can be adjusted easily..
- ★ Mainly used for wood, plastic plate, a resin plate, aluminum, composite panels and another non-hard material drilling..
- ★ Can also be used for DIY furniture, work easily, drilling holes more accurately.
Check StockDONNGYZ Electrical Bench Drill Mini Press Work Bench Machine 340W + Drill Chuck + Hex Key(US Stock)
- ★Drilling Diameter: 0.6-6.5mm / 0.02-0.26inch..
- ★High quality drilling, easy operation, good stability.With speed regulating switch, speed can be adjusted easily..
- ★Great speed, low noise, long life drilling no swing, drill breakage rate is very low, high efficiency..
- ★Mainly used for wood, plastic plate, a resin plate, aluminum, composite panels and another non-hard material drilling..
- ★Shipping Address and Distribution Logistics: Company has warehouses in California and New Jersey in the US, and We Ship FED and UPS carriers. Delivery time is 3-5 days. We have a Professional Customer Service Team to Reply You within 24 hours.If you have any Questions, Please feel free to Contact us.You Deserve the Best After-sales Service..
Check StockGoplus Compressed Air Filter Regulator Combo, 3/8" NPT Air Filter Pressure Regulator Gauge Kit Water Separator w/Pressure Gauge, 150PSI
- This air pressure regulator is made of nylon, PC and cast aluminum, durable and not easy to get rusty. The maximum air pressure can reach up to 1.0MPa/ 150PSI..
- This pressure regulating filter allows the precise control and the delivery of clean, dry air. Internal diaphragm design smoothes and regulates the airflow, which also minimizes the negative effects of air pulsations and pressure imbalances created by piston-style compressors..
- With the adjustable pressure control knob, you can pull up and turn the black knob at the top of the regulator to set desired pressure. It will make your work more accurately and our air pressure regulator is definitely the right choice for you..
- This air pressure regulator is compact and also combines the functions of both air filter and regulator. It is compact and most effective when space is constrained..
- There is a clear dial plate on the tool and it comes with a clear introduction, which makes the Pressure regulating filter very easy to read and use..
Check Stock110V 340W 0-16000rpm 3-Speed Heavy Duty 1-10mm Bench Drill Press Workshop Mounted Drilling Chuck Drilling Stand Chuck Adjust Metal Wood Plastic Open Hole Milling Machine USA STOCK
- ★ High quality drilling, easy operation, good stability.
- ★ Great speed, low noise, long life drilling no swing, drill breakage rate is very low, high efficiency..
- ★ With speed regulating switch, speed can be adjusted easily..
- ★ Mainly used for wood, plastic plate, a resin plate, aluminum, composite panels and another non-hard material drilling..
- ★ Can also be used for DIY furniture, work easily, drilling holes more accurately.
Check StockSMALLRIG Quick Release Shoulder Plate for Sony VCT-14 Tripod Adapter with Rosettes - 2837
- ...te for Manfrotto 501. Users can realize a rapid switch between shoulder shooting and tripod shooting through the shoulder pad..
- 【15mm LWS rod adapter】The front and rear ends of the dual rod system have a standard diameter of 15mm and a spacing of 60mm. Moreover, the front-end dual rod system can save 24mm for up-regulating, which can guarantee the spacing between the lens center of FX9, FS5, for URSA MINI, for CANON C300, and other devices to be 85mm as the standard..
- 【M6 Rosette】Both sides of the shoulder pad are standard M6 rosette mount, which can be installed with the original control handle of 1810 or FX9 machines..
- 【Center Gravity Adjustable】This item can be adjusted forward about 80mm through the built-in quick release plate in order to facilitate users to adjust the equipment’s center gravity and install the following focus and matte box.
- the front two tubes can be adjusted together with the quick release plate, so there is no need to remove the equipment such as follow focus and matte box..
- 【Extra Mounting Points】The right side of 2837 is reserved with a 1/4 "-20 threaded hole, which can be used for installing magic arm and other products. The shoulder pad adopts the new silicone shoulder pad, which conforms to the shape of hum....
Check StockHappybuy Embossing Machine 72 Character Card Embosser for PVC Card Credit ID VIP Manual Embosser Machine Credit Card
- 【PARAMETER DETAILS】- Applies workpiece: Normative PVC card, 85.5 mm x 55 mm size.
- Character-selection: Character rosette plate.
- 【72C CODE SELECTION PLATE】- 72 coded characters, covering full range, use the ISO international credit card special characters to meet your needs. 26 English capital letters, 20 capitalization & lower Arabic numerals, 8 small symbols, 17 large symbols, and 1 modify symbol..
- 【EASY TO OPERATE】- Firstly, put a standard PVC card (85MM X 55MM) into the cardholder and fix it. Then, move the frame and select the desired position, turn the character plate and select the desired character, and then operate the handle & press it..
- 【EFFECTIVE ADJUSTMENT】- If the embossing depth exceeds your needs, please adjust the bolt at the bottom of the PVC embosser. Turning the regulating screw clockwise may deepen the typed characters, vice versa..
- 【WIDE APPLICATION】 - The manual PVC embossing machine embosses protruding letters and numbers on the PVC's surface, making the PVC card identifiable and unique. Suitable for shopping malls, entertainment centers, and catering centers, and so on..
Check StockCourant Electric Burner Single Buffet Countertop Hotplate 1000W Portable Cooktop Black
- Great for student, offices, camping, RV/caravans, man cave pancakes, holiday homes, and everyday use or entertaining, or as an extra cooking appliance....
- Features a Temperature Regulating Thermostat control knob, Power indicator light, Automatic safety shut-off.
- Cooking Plate diameter 6. 1”, Skid proof Rubber feet, Stainless Steel Design.
- Can Be Used for Cooking at Home, Office and College Rooms..
- 1000 Watts Power, Portable Burner with Flat Hotplate Design, Slim Space Saving Design.
Check StockECUTEE 340W Mini Drill Press Bench 3-Speed, Mini Electric Bench Drill Press Stand Compact Portable Drill Press Workbench Metal Drilling Repair Tool Expanding Drilling Machine DIY Furniture Tool
- Drilling Diameter: 0.6-6.5 mm / 0.02-0.2 6inch..
- High quality drilling, easy operation, good stability. With speed regulating switch, speed can be adjusted easily..
- Mainly used for wood, plastic plate, a resin plate, aluminum, composite panels and another non-hard material drilling. Can also be used for DIY furniture, work easily, drilling holes more accurately..
- 3 Variable speeds per minute: I:0-8000r/min, II: 0-11000r/min, III:0-16000r/min..
- Great speed, low noise, long life drilling no swing, drill breakage rate is very low, high efficiency..
Check StockSuteck Magnetic Stirrer Hot Plate Mixer SH-2 Lab Stirrers Max 520°F Hotplate 2000 RPM Stir Plate with Stirring Bar and Support Stand
- ✅ Adjustable Stirring Speed--There is a speed regulating device at the bottom of the SH-2 magnetic stirrer hot plate. Rotate clockwise to increase the stirring speed, and counterclockwise to decrease. Adjust as needed. The maximum stirring speed is up to 2000RPM..
- ✅ Rapid Heating--Heating Power: 180W, Max Temp: 520°F. It can be stirred and heated at the same time. Note: The SH-2 lab stirrer has no temperature display, and an additional thermometer is required to measure the temperature during use..
- ✅ Advanced Material--The chemistry heat magnetic mixer is made of advanced materials, resistant to high temperature, abrasion, and chemical corrosion. Each stir hot plate stirrer has been tested and inspected, and the quality is guaranteed. 1 inch Teflon coated stirring bar and fuse included..
- ✅ Widely Used--The magnetic heated stirrer heats and stirs at the same time, which is very suitable for scientific research institutions, industry, agriculture, laboratories and universities. Work continuously for 4 hours in high-speed state and 8 hours in medium-speed state..
- ✅ Quality Assurance--The professional magnetic hotplate stirrer has undergone strict quality inspection and can operate stably for a long time. If you have any questions about the lab ho....
Check StockRonlap Gate Wheels, Spring Loaded Gate Caster for Fence Wooden Gate, Heavy Duty Rubber Wheel for Gate, with Universal Mount Plate, 220 Lbs Capacity, 4-Inch, Silver
- ...ue spring built-in-design, extends spring’s service life while providing a more beautiful appearance. Built-in spring-loaded clamp acts as a shock absorber when gate wheel is rolling over uneven or rough surfaces, reducing stress on gate hardware, extending the life of a gate’s posts and hinges.
- 【1-3/4” Self-regulating Vertical Travel】: Adjustable spring bracket with up to 1-3/4” spring-loaded vertical travel, automatically adjusting gate height with surrounding terrain throughout the opening and closing cycles, effectively prevent gates from sagging to keep the fence line level.
- 【Heavy Duty Gate Casters】: Thicken silver steel plate and double ball bearing bring strong load bearing support, 220lbs maximum load capacity for each gate caster, make it easy to open or close large, heavy gates.
- 【360° Swivel Wheel for Gate】: 4 inches ageing resistance rubber caster with 360° rotation top plate, great in mechanical strength and loading capacity, easily transform to any direction that you want, enabling you to spend little strength to move gate safely.
- 【Easy to Install】: Universal mounting plate with 4 holes to easily attach to wooden gates with lag bolts, the versatile hole pattern also allows for easy mounting to a tubular farm gate a....
Check Stock