Reviews Refrigeration Fitting

134a Quick Coupler AC R134a Adapter Fittings Quick Connector 1/4 SAE Male Flare High/Low A/C Freon Manifold Gauge Hose Conversion Kit

  • [High Quality]--Made of brass metal construction, durable, reliable .Quick action 6-ball operated, safe design to protects against injury and....
  • [High/Low SAE Male Fitting]--Quick coupling connections sizes are 1/4" inch SAE Male Fitting. Easy identification with colored knobs - Red for high....
  • [Widely Applicable]--This adapter is used for connecting 1/4" SAE hose fitting to R134a automobile refrigeration tank, which adapt to the female flare....
  • [Easy to use]--Quick, Easy Connect/Disconnect, High Flow.
  • Adjustable to fit different Valve Cores..
  • [Method of Use]--Connect bottoms with vehicle's R134A service port.
  • connect the R-134A adapter with the refrigerant hose..
Check Stock

Joywayus Hex Nipple 1/2' Male x 1/2' Male Threaded Stainless Steel 304 Threaded Nipple Pipe Fittings for Brew Kit Home Piping (Pack of 5)

  • 【Size】1/2" Male x 1/2" Male Thread. Tapered thread. Pipe fittings are components used for connecting, terminating, controlling flow, and changing the direction of pipe..
  • 【High Quality Material &Threads】Made of quality stainless steel 304, durable and sturdy corrosion resistance, ductility at high temperatures, and low magnetic permeability. High quality and deep threads allow the fittings to bite better, tight threads, not easy to slip..
  • 【Hex Nipple】The hex nipple fitting is a short length of pipe with threaded ends for connecting threaded pipes, and it has a hexagonal section in the middle for an increased bearing surface when adjusting the fitting with a wrench..
  • 【Operating temperature range】Temperature rating: -65 to 250 degrees F.
  • 【Widely Applications】Male threads for connecting to female threaded pipes, this premium pipe fitting can be used to connect various pipes, such as air pipe, fuel pipe, water pipe as well as air tools.
  • it can also be used with grease, fuels, LP and natural gas, refrigeration, instrumentation and hydraulic systems in low and medium pressure pipe line connections..
Check Stock

Vis Brass CA360 Flared Tube Fitting, SAE 45 Degree Flare, Cap, 3/8\ Tube OD (Pack of 5)

  • Cap fitting for closing the end of a male-threaded flare tube.
  • Forged nuts for refrigeration applications.
  • CA360 brass for strength and resistance to corrosion.
  • Operating temperature range of -65 to +250 degrees F (-53 to +121 degrees C).
Check Stock

sky-w SAE 45 Degree Flared Fittings, Cap Nut (3/8\ Female, Pack of 5)

  • Advantages: This fitting resists mechanical pullout, can be assembled and disassembled repeatedly..
  • Specifications: Listed with underwriter's laboratories for flammable liquid,marine,refrigeration and gas applications. Meet functional and dimensional requirement of the SAE J512 and SAE J513..
  • Applications: Use with copper,brass,aluminum and welded steel hydraulic tubing that can be flared..
Check Stock

NewPosition 4CFM 1/3HP Air Vacuum Pump HVAC A/C Refrigeration Tool Kit AC,Auto Repair Equipment,Manifold Gauge Set(R134A R22),3 Hoses

  • ✅【Simple But Professional】New Position Powerful HVAC refrigeration kit,4CFM、1/3 HP、single-stage rotary air vacuum pump,low noise with internal high volume cooling fan for extended use..
  • ✅【Heavy Duty Vacuum Pump】Stable copper motor enables stable operation,die-cast aluminum alloy casing keep lightweight and durable,Equipped with brass fitting tethered safety caps to prevent oil leaks during transportation and handling..
  • ✅【HVAC Gauge Reading】The New Position HVAC service gauge set is great for diagnosing and repairing AC systems. Ideal use for R12, R22, R134a..
  • ✅【Easy Oil Change】The vacuum pump features a simple Oil Fill Port for a clean pour and Oil Drain Plug positioned beneath the oil reservoir to quickly drain when needed. Checking the oil sight glass will help to ensure the proper level of oil..
  • ✅【What You Get】Multicolored set of three hoses, Manifold Gauge Set measures the pressure of refrigeration system at different stages,Storage Bag to keep equipment clean and dust free..
Check Stock

Legines Brass Flared Plug 3/8\ Tube OD, SAE 45 Degree Flare Tube Fitting（Pack of 2）

  • Hex plug with SAE 45-degree flare male end terminates tube size fitting.
  • Brass for corrosion resistance, ductility at high temperatures, and low magnetic permeability.
  • For use with LP and natural gas, refrigeration, and hydraulic applications.
  • Used With: Copper, brass, aluminum and steel hydraulic tubing that can be flared..
  • Low cost and reusability, long or short nut. Good resistance to vibration..
Check Stock

Robinair 15510 VacuMaster Single Stage Vacuum Pump - Single-Stage 5 CFM

  • Robinair's VacuMaster Single-Stage Vacuum Pump is designed for air conditioning and refrigeration service.
  • 1/2 HP, 110V/60Hz thermally protected motor.
  • Features an inlet fitting engineered for maximum airflow, while preventing oil backflow, and finned aluminum surfaces that dissipate heat faster,....
  • 1/4 inch flare and 1/2 inch ACME inlet fittings, easy to read sight glass, easy access oil fill port, and angled oil drain valve for faster, more....
Check Stock

Legines Brass SAE 45 Degree Flared Tube Fitting, Long Flare Nut, 5/16\ Tube OD (2 pcs)

  • Long flare nut for connecting to a tube or fitting.
  • For use with LP and natural gas, refrigeration, and hydraulic applications.
  • Brass for corrosion resistance, ductility at high temperatures, and low magnetic permeability.
  • Operating temperature range of -65 to +250 degrees F,Resists mechanical pullout for a more secure connection.
  • These fittings contain lead and are not allowed by federal law to be installed for potable water use in the U.S.A. and its territories..
Check Stock

Robinair (15300) VacuMaster Economy Vacuum Pump - 2-Stage, 3 CFM

  • Robinair's VacuMaster Economy Vacuum Pump is designed for air conditioning and refrigeration service, featuring a 2-stage rotary vane design, 7.5 ounce oil capacity, and non-skid feet.
  • 1/3 HP, 115V/60Hz thermally protected motor.
  • Features an inlet fitting engineered for maximum airflow, while preventing oil backflow, and finned aluminum surfaces that dissipate heat faster, keeping the pump cooler and extending life.
  • 1/4 and 3/8 inch MFL inlet fittings, 3/8 inch FFL x 1/2 inch ACME adapter, easy to read sight glass, easy access oil fill port, and angled oil drain valve for faster, more complete draining.
Check Stock

Robinair 18560 A/C and Refrigeration Valve Core Remover/lnstaller

  • Robinair Air Conditioning Valve Core Remover and lnstaller - the ideal tool for replacing damaged valve cores or performing A/C or refrigeration service that necessitates valve core removal.
  • Attaches to 1/4 inch male flare access fittings and allows valve core removal and replacement without loss of refrigerant.
  • Durable, solid brass tool has a ball valve that can be opened and closed in just a quarter-turn, rather than a slower to operate stem-type valve.
  • Ball valve features a corrosion resistant stainless steel ball for smooth action and a reliable seal.
  • Durable brazed side fitting allows system access for various A/C service procedures.
Check Stock

Robinair (15150) VacuMaster Economy Vacuum Pump - 2-Stage, 1.5 CFM

  • Robinair's VacuMaster Economy Vacuum Pump is designed for air conditioning and refrigeration service.
  • featuring a 2-stage rotary vane design, 7.4 ounce oil capacity, and non-skid feet.
  • 1/4 HP, 115V/60Hz thermally protected motor.
  • Features an inlet fitting engineered for maximum airflow, while preventing oil backflow, and finned aluminum surfaces that dissipate heat faster, keeping the pump cooler and extending life.
  • 1/4 inch MFL & 3/8 inch ACME inlet fittings, 3/8 inch FFL x 1/2 inch ACME adapter, easy to read sight glass, easy access oil fill port, and angled oil drain valve for faster, more complete draining.
Check Stock

Robinair (15500) VacuMaster Economy Vacuum Pump - 2-Stage, 5 CFM , Red

  • Robinair's VacuMaster Economy Vacuum Pump is designed for air conditioning and refrigeration service.
  • featuring a 2-stage rotary vane design, 7.5 ounce oil capacity, and non-skid feet.
  • 1/3 HP, 115V/60 Hz thermally protected motor.
  • Features an inlet fitting engineered for maximum airflow, while preventing oil backflow, and finned aluminum surfaces that dissipate heat faster, keeping the pump cooler and extending life.
  • 1/4 inch MFL & 3/8 inch ACME inlet fittings, 3/8 inch FFL x 1/2 inch Acme adapter, easy to read sight glass, easy access oil fill port, and angled oil drain valve for faster, more complete draining.
Check Stock

Robinair (15301) VacuMaster Economy Vacuum Pump - 2-Stage, 71 liters/minute

  • Robinair's VacuMaster Economy Vacuum Pump is designed for air conditioning and refrigeration service.
  • featuring a 2-stage rotary vane design, 7.5 ounce oil capacity, and non-skid feet.
  • 3 CFM (71 liters/minute) free air displacement.
  • 1/3 HP, 220V/50Hz thermally protected motor.
  • Features an inlet fitting engineered for maximum airflow, while preventing oil backflow, and finned aluminum surfaces that dissipate heat faster, keeping the pump cooler and extending life.
  • 1/4 and 1/2 inch MFL inlet fittings, 3/8 inch FFL x 1/2 inch ACME adapter, easy to read sight glass, easy access oil fill port, and angled oil drain valve for faster, more complete draining.
Check Stock