Reviews Reducing Elbow Male Threaded

Hromee Extended Tank Drain Assembly Kit with 10 Inch Braided Steel Hose 1/4 Inch Drain Valve and Elbow Fitting for Air Compressor

  • ...dditional drain hose or elbow. A thread seal tape is equipped with this drain kit for multiple use to prevent leaks..
  • There is a Hex bushing brass adapter which is 3/8" Male x 1/4" Female for connecting two pipes or with different diameters. Has a 3/8” male NPT threaded on one end and a 1/4” female NPT threaded on the other for connecting a female and a male pipe or fitting with different diameters Brass for corrosion resistance, ductility at high temperatures, and low magnetic permeability..
Check Stock

Johnson Controls VG7882ET Series VG7000 Bronze Globe Valve, Three-Way Mixing, Brass Trim, Union Sweat End Connection, 1/2\ Valve Size, 1.8 Cv

  • Elbow globe valve with rising stem and threaded bonnet for on/off actuation and flow control (throttling) in a pipeline.
  • Bronze valve body and disc for strength and corrosion resistance.
  • Pounds per square inch (gauge) (psig) rating of 200 for water, oil, and gas (WOG) and 125 psig for steam working pressure (SWP).
  • Threaded bonnet for reduced risk of leakage.
  • Female National Pipe Taper (NPT) threads on both ends for connecting to male threaded pipes.
Check Stock

Spears 1413 Series PVC Tube Fitting, 90 Degree Elbow, Schedule 40, Gray, 2' Barbed x NPT Male

  • 90-degree elbow for connecting flexible polyethylene tubing to pipe at an angle.
  • Barbed male insert on one end and male NPT threads on the other end for connecting flexible tubing to female NPT threaded pipe.
  • PVC for chemical and corrosion resistance, high strength, and less weight than fittings made from metal.
  • Maximum operating temperature of 140 degrees F.
  • Meets ASTM D1784 and D2609 standards for quality assurance, and certified by NSF International for potable water service.
Check Stock

Fafeicy 10Pcs Thread Inserts Kit, Male Female Thread Reducing Nut, Thread Locking Inserts, for Thread Repair Tool, Nut

  • A threaded insert can be used to repair the threaded hole in a costeffective manner when a thread error occurs, or a damaged female threaded hole is repaired..
  • Widely used in aviation, automobiles, steam turbines, electronic communications, computers, lamps, molds, mechanical equipment and radiators..
  • The thread reducing nut is an effective thread repair tool set, including 10pcs threaded inserts, simple to install..
  • The thread repair tool adopt goodquality stainless steel to ensure the durability, and stability of the product..
  • Moderate size: Female thread M6x1.0mm, Male thread M10x1.5mm. Stable structure, excellent performance , and has a long service life..
Check Stock

Legris 3199 06 10 Nylon & Nickel-Plated Brass Push-to-Connect Fitting 90 Degree Elbow 6 mm Tube OD x 1/8 BSPP Male

  • 90-degree male elbow to connect a tube to a female threaded connection at a 90-degree angle.
  • Push-to-connect metric tube connection on one end and male BSPP threads on the other end.
  • Nylon body and nickel-plated brass sub-base.
  • Handles pressures up to 290 psi (20 bar), an operating temperature range of -20 to +80 degrees C (-4 to +176 degrees F), and a vacuum capability of 755 mm Hg.
Check Stock

Eaton Aeroquip 2024-2-4S 90 Degree Male Elbow JIC 37 Degree & NPT End Types Carbon Steel 1/4 JIC m x 1/8 NPT m End Size 1/4 Tube OD 1/8 Male Pipe Size Pack of 4

  • 90-degree male Joint Industry Council (JIC) elbow to connect to an National Pipe Thread (NPT) female thread at a 90-degree angle.
  • Male JIC threads on one end and male NPT threads on the other end for connecting two different threaded ends.
  • Carbon steel for tensile strength and hardness.
  • Standard duty for light to medium pressure applications.
  • Society of Automotive Engineers (SAE)-compliant for SAE standards J512, J513, J514, J1926 and J1453 for functional requirements.
Check Stock

Anderson Metals 50065 Brass Compression Tube Fitting 90 Degree Elbow 3/8 x 3/8 Tube OD,50065-06

  • 90-degree elbow for connecting two tubes at an angle.
  • Female compression tube fitting for connecting to male threaded pipes.
  • Brass for corrosion resistance, ductility at high temperatures, and low magnetic permeability.
  • Operating temperature range of -65 to 250 degrees F.
  • These fittings contain lead and are not allowed by federal law to be installed for potable water use in the U.S.A. and its territories..
Check Stock

Eaton Aeroquip 2043-6-6S 90 Degree Bulkhead Union Elbow JIC 37 Degree End Types Carbon Steel 3/8 JIC m End Size 3/8 Tube OD

  • Bulkhead 45-degree elbow to connect two tubes through a panel and change tube direction by 45 degrees.
  • Male JIC threads at both ends for connecting two threaded tubes.
  • Carbon steel for tensile strength and hardness.
  • Standard duty for light to medium pressure applications.
  • Society of Automotive Engineers (SAE)-compliant for SAE standards J512, J513, J514, J1926 and J1453 for functional requirements.
Check Stock

HangTon SD20 3 Pin Connector Quick Disconnect Waterproof IP68 Right Angle Cable Plug Panel Mount Socket, 25 Amp Power 14 AWG Wire

  • 3 pin panel mount socket and 90-degree angle male plug, any direction elbow.
  • Cable outer diameter range: 8-12mm, Wire Size: ≤4mm² or 12AWG 14 AWG, Contact Diameter: Φ2.8mm. Rated Voltage/Current : AC 380V/25A, Resistance: 1mΩ.
  • Protected against solids & liquids, provide a secure and reliable connection in the harsh environment.
  • Waterproof IP68, plastic shell, threaded coupling, panel mount, quick disconnect, solder, angled cable plug & panel mount socket.
Check Stock

Medline MDT829298H Knit Elastic Heel/Elbow Protectors One Size Green

  • COPPER COMPRESSION ELBOW SLEEVE is made of copper infused compression threads to reduce inflammation, sustain connective tissues and in blood and....
  • ELBOW SLEEVE Stays in place with a nonslip silicone band while providing mobility of the joint while heavily exercising, weightlifting, golfing,....
  • COMPRESSION SLEEVE IS MADE OF breathable odor reducing fabric to wick away moisture for all day comfort worn during the day or night. The high quality....
  • HELP RELIEVE ELBOW PAIN with mild compression to deliver a controlled amount of pressure reducing discomfort. Keep elbows, arms and joints compressed....
  • COMPRESSION ELBOW SLEEVE Sizing: Measure circumference of the upper arm, about 2-3 inches above elbow. Medium 10.5-11.5 inches.
Check Stock

uxcell Push to Connect Tube Fitting Male Elbow 4mm Tube OD X 1/8NPT Thread Pneumatic Air Push Fit Lock Fitting

  • 【UNIVERSAL DESIGN】- Product Name : Elbow Push to Connect Fitting.
  • Type: 90 Deg Swivel Elbow Male Connector.
  • Tube and Thread Size : 4mm OD x 1/8" NPT Male.
  • Operating temperature：-10 - 60 Degree Celsius.
  • 【GOOD DESIGN】- Push-to-connect tube connection on one end and male threads on the other end. A good release cap can withstand greater and stronger pressure without tripping..
  • 【ADVANTAGE】-Have abrasion resistance, light weight, and resistance to crushing and cracking,Compressive and corrosion resistant, good sealing performance and long service life..
  • 【APPLICATION】- Elbow Air Fitting has Quick and simple installation,designed for using to connect with polyethylene, nylon and PU tubing..
Check Stock

uxcell Push to Connect Tube Fitting Male Elbow 6mm Tube OD x M5 Thread Pneumatic Air Push Fit Lock Fitting Blue 5pcs

  • 【UNIVERSAL DESIGN】- Product Name : Elbow Push to Connect Fitting.
  • Type: 90 Deg Swivel Elbow Male Connector.
  • Operating temperature：-10 - 60 Degree Celsius.
  • 【GOOD DESIGN】- Push-to-connect tube connection on one end and male G threads on the other end. A good release cap can withstand greater and stronger pressure without tripping..
  • 【ADVANTAGE】-Have abrasion resistance, light weight, and resistance to crushing and cracking,Compressive and corrosion resistant, good sealing performance and long service life..
  • 【APPLICATION】- Elbow Air Fitting has Quick and simple installation,designed for using to connect with polyethylene, nylon and PU tubing..
Check Stock

uxcell Push to Connect Tube Fitting Male Elbow 4mm Tube OD x M5 Thread Pneumatic Air Push Fit Lock Fitting Blue 2pcs

  • 【UNIVERSAL DESIGN】- Product Name : Elbow Push to Connect Fitting.
  • Type: 90 Deg Swivel Elbow Male Connector.
  • Operating temperature：-10 - 60 Degree Celsius.
  • 【GOOD DESIGN】- Push-to-connect tube connection on one end and male G threads on the other end. A good release cap can withstand greater and stronger pressure without tripping..
  • 【ADVANTAGE】-Have abrasion resistance, light weight, and resistance to crushing and cracking,Compressive and corrosion resistant, good sealing performance and long service life..
  • 【APPLICATION】- Elbow Air Fitting has Quick and simple installation,designed for using to connect with polyethylene, nylon and PU tubing..
Check Stock