Reviews Reduced Heat Buildup

Gates 550J8 Micro-V Belt, J Section, 550J Size, 55\ Length, 3/4\ Width, 8 Rib

  • EPDM for resistance to weathering, oils, water, and some solvents.
  • Short profile for flexibility, reduced heat buildup and performance at higher speeds.
  • Fiber-reinforced ribs for resistance to wear.
  • Smooth running for minimal vibration at high speeds.
  • Meets RMA oil and heat resistance standards and static conductivity requirements.
Check Stock

2 SPI Piston Kits 1999-2008 fits Polaris 550 SuperSport Standard Bore 73mm

  • Fits: Suzuki DRZ 400 2000-2012, LTZ400 2003-2012.
  • Kawasaki KLX 400 2003-2006, KFX 400 2003-2006.
  • Piston kits come with the piston individually wrapped.
  • a set of OEM quality rings packed in their own box, a wrist pin, and circlips.
  • Features MOS2 (Teflon/Molybdenum) Coated Skirts, a rolled-on application process provides a bond that is 10 times stronger than other spray on coatings for increased heat transfer, reduced friction, and helps eliminate cold seizures.
  • The Machined Smooth Heads reflects combustion heat and reduces carbon buildup, protecting the top of the piston increasing horsepower and fuel economy by up to 6 percent.
  • Anodized Domes increase heat resistance and durability.
  • pistons with anodized domes are 75 percent stronger than non-anodized pistons.
Check Stock

RYOBI 18V Cordless 5 in. Variable Speed Dual Action Polisher Kit with 4.0 Ah Battery and 18V Charger

  • Dual action rotation for reduced heat buildup and professional finish.
  • Variable speed dial for optimized control (3,000 - 7,500 OPM).
  • Up to 2 hours of run time on an 18V ONE+ 9.0 Ah High Performance Battery (not included).
Check Stock

TTI 18-VOLT 5 in. Variable Speed Dual Action Polisher (PBF100B) (Bulk Packaged, NO Retail Packaging)

  • This item is removed from retail packaging for shipping purposes (Bulk Packaged, No Retail Packaging) and will arrive in a generic shipping box or bag.
  • Dual action rotation for reduced heat buildup and professional finish.
  • Variable speed dial for optimized control (3,000 – 7,500 OPM).
  • Slide lock-on switch for continuous polishing.
Check Stock

AHL Piston Rings for Honda CBR250 CBR19 MC19 KY1 (STD 48.5mm)

  • Kit Includes 2 Compression Rings, 1 Oil Ring & 2 Scraper Rings (you get exactly what is pictured).
  • Rings are for standard bore size - 74.00mm.
  • Reflects combustion heat and reduces carbon buildup, protecting the top of the piston. Some tests have shown this feature can increase horsepower and fuel economy by up to 6%.
  • Hypereutectic Casting Process Provides higher silicon content for reduced expansion rates and additional wear resistance.
  • it also has an ability to withstand higher cylinder temperatures.
Check Stock

Capresso 560.04 Infinity Conical Burr Grinder, Brushed Silver

  • Commercial-grade solid conical steel burrs with advanced cutting design for high precision grinding.
  • Extremely wide grinding range from ultrafine Turkish to coarse for all kinds of coffee preparation. The settings are marked into four categories: extra fine, fine, regular and coarse..
  • Tight-fitting ground coffee container holds up to 4 oz of ground coffee.
  • See-through bean container holds up to 8.8 oz of beans.
  • Gear reduction motor grinds slow with reduced noise and little static build-up.
  • Slowest grinding speed in its class creates less friction and heat buildup preserving maximum aroma and flavor for all grind settings.
  • Please note :All units are new and tested with actual coffee beans prior to leaving the factory. The grinder is thoroughly cleaned before it’s packed, however it may contain a small amount of coffee residue.
Check Stock

Capresso 565.05 Infinity Conical Burr Grinder, Stainless Steel

  • Commercial-grade solid conical steel burrs with advanced cutting design for high precision grinding.
  • Extremely wide grinding range from ultrafine Turkish to coarse for all kinds of coffee preparation. The settings are marked into four categories: extra fine, fine, regular and coarse..
  • Tight-fitting ground coffee container holds up to 4 oz of ground coffee.
  • See-through bean container holds up to 8.8 oz of beans.
  • Gear reduction motor grinds slow with reduced noise and little static build-up.
  • Slowest grinding speed in its class creates less friction and heat buildup preserving maximum aroma and flavor for all grind settings.
  • Please note :All units are new and tested with actual coffee beans prior to leaving the factory. The grinder is thoroughly cleaned before it’s packed, however it may contain a small amount of coffee residue.
Check Stock

Freud D0760X Diablo Ultra Finish Saw Blade ATB 7-1/4-Inch by 60t 5/8-Inch Arbor, 2-Pack

  • BUNDLE INCLUDES: 2 x Diablo 7-1/4 inch x 60-Tooth ATB Ultra Finish Saw Blade with 5/8 inch Arbor.
  • TiCo HI-DENSITY CARBIDE TOOTH: TiCo Hi-Density Carbide specifically designed for each application to provide maximum performance and cutting life.
  • BUILD FOR ACCURACY: Tri-metal shock-resistant brazing allows the carbide tips to withstand extreme impact for maximum durability. The blade produces a remarkably clean, chip-free cut that requires little to no sanding.
  • REDUCED FRICTION: A permanent Perma-SHIELD non-stick coating protects the blade from heat and corrosion, reduces friction and pitch buildup.
Check Stock

Scotsman APRC1-P AqualPatrol Plus Water Filter Replacement Cartridge, NSF

  • HALF MICRON FILTRATION: Extends the life of the machine and prevents filtration related service calls. Leaves chlorine in water to keep machine cleaner longer..
  • LESS BUILDUP: Your ice machine stays cleaner longer since some chlorine is left in the water. Scale buildup is reduced with the help of a polyphosphate feed..
  • ANTIMICROBIAL AGENT: An antimicrobial agent helps prevent algae, bacteria, and mold from growing as rapidly in the ice machine..
  • POLYPHOSPHATE FEED: Inhibits scale build up. Tighter pore size now eliminates more undesirable compounds..
  • EASY TO INSTALL: New smaller footprint gives operations more flexibility..
Check Stock

Capresso 560.01 Infinity Conical Burr, Black (Renewed)

  • Commercial-grade solid conical steel burrs with advanced cutting design for high precision grinding.
  • Extremely wide grinding range from ultrafine Turkish to coarse for all kinds of coffee preparation. The settings are marked into four categories: extra fine, fine, regular and coarse..
  • Tight-fitting ground coffee container holds up to 4 oz of ground coffee.Safety lock system for safe operation during and after use.
  • auto off when bean container is not locked.Timer can be set to grind from 5 to 60 seconds.
  • See-through bean container holds up to 8.8 oz of beans.
  • Gear reduction motor grinds slow with reduced noise and little static build-up. Dimensions: H-10.5 x W-7.75 x L-5 inches.
  • Slowest grinding speed in its class creates less friction and heat buildup preserving maximum aroma and flavor for all grind settings.
  • Please note :All units are new and tested with actual coffee beans prior to leaving the factory. The grinder is thoroughly cleaned before it’s packed, however it may contain a small amount of coffee residue.
Check Stock

C429-012 11/4COUPLING

  • Coupling for connecting two pipes with the same diameter in a straight run.
  • Slip openings for connecting to male unthreaded pipes or fitting.
  • PVC for corrosion resistance, high strength, and less weight than fittings made from metal.
  • Smooth interior finish for reduced friction and material buildup.
  • Meets specifications ASTM D2466 and D1784 for quality assurance.
Check Stock

C4818 2 MIPT PLUG PVC

  • Plug for closing the end of a pipe or fitting.
  • Male National Pipe Taper (NPT) threads for connecting to a female threaded pipe.
  • PVC-DWV for corrosion resistance, high strength, and less weight than fittings made from metal.
  • Smooth interior finish for reduced friction and material buildup.
  • Meets specifications ASTM D2665 and D3311 for quality assurance.
Check Stock

10-2 Plastic Triglides Slides

  • Coupling for connecting two pipes with the same diameter in a straight run.
  • Hub ends for connecting to male unthreaded pipes or fittings.
  • PVC-DWV for corrosion resistance, high strength, and less weight than fittings made from metal.
  • Smooth interior finish for reduced friction and material buildup.
  • Meets specifications ASTM D2665 and D3311 for quality assurance.
Check Stock