Reviews Reduced Exhaust Temperature

Nightrider FL-XiED Fuel Enrichment for Harley EFI Plug - n - Play DK-FLXiED-10-NR

  • The Plug-n-Play FL-XiED-10 richens the Air Fuel Ratio from14.6:1 to 14.0:1 in closed loop mode..
  • Immediate Benefits: Lower Engine Temperature - Lower Exhaust Temperature - Improved Throttle Response - Reduced Surging - Reduced Pinging.
  • Recommended for: Stock Configuration - High flow air cleaner - High flow exhaust - "Stage 1" (both high flow exhaust & air cleaner).
  • The FL-XiED-10's are a cost effective alternative to an aftermarket tuner & dyno runs. .
  • FL-XiED-10's will cool your bike down and make it run better..
Check Stock

TOTALFLOW 20019 Straight Through Universal Exhaust Muffler - 409 Stainless Steel - 3 Inch Inner Diameter Inlet / Outlet

  • Aluminium construction --Aluminized steel construction and internal drainage system for maximum durability，Internal partitions with the change of temperature, the deformation is reduced by thermal expansion and cold contraction.
  • Noise reduction performance--Factory-style using aerodynamics sound absorbs unwanted interior resonance to reduce radiated noise，OE-style domed heads Make the noise lower.
  • High-quality-- Internal partition wall and high quality material make it have the characteristics of high temperature resistance,Factory-style Welded structure provide stability and longer service life.
  • Muffler size--3'' muffler| Body Length: 13"| Overall Length: 19"| Body Height: 4" | Body Width: 9.5" |.
  • Universal automotive replacement exhaust muffler-Floshine 40 series 3 inch muffler are suitable for most vehicles, including trucks, off-road vehicles and pickups, and can even be used on generators to reduce noise. They can be installed with Floshine clamps or welded to connect the exhaust pipe to the 3 inch exhaust muffler.
Check Stock

Floshine Universal Mufflers,Single Chamber 3 inch inlet/3 inch outlet,Performance Automotive Exhaust Muffler FH430109

  • Aluminium construction --Aluminized steel construction and internal drainage system for maximum durability，Internal partitions with the change of temperature, the deformation is reduced by thermal expansion and cold contraction.
  • Noise reduction performance--This 3 inch quiet mufflerFactory-style using aerodynamics sound absorbs unwanted interior resonance to reduce radiated noise，OE-style domed heads Make the noise lower.
  • High-quality-- Internal partition wall and high quality material make it have the characteristics of high temperature resistance,Factory-style Welded structure provide stability and longer service life.
  • Performance 3''Muffler size--3''inlet 3''outlet| Body Length: 7"| Overall Length: 12.5"| Body Height: 4" | Body Width: 9.5" | Inlet: 3" ID.
  • Adaptability-The universal 3 inch muffler exhaust is fit on most vehicles, and only requires clamps or welding for installation..
Check Stock

Floshine Universal Mufflers,Single Chamber 2.5 inch inlet/2.5 inch outlet,Performance Automotive Exhaust Muffler FH425109

  • Aluminium construction --Aluminized steel construction and internal drainage system for maximum durability，Internal partitions with the change of temperature, the deformation is reduced by thermal expansion and cold contraction.
  • Noise reduction performance--Super 10 Factory-style using aerodynamics sound absorbs unwanted interior resonance to reduce radiated noise，OE-style domed heads Make the noise lower.
  • High-quality-- Internal partition wall and high quality material make it have the characteristics of high temperature resistance,Factory-style Welded structure provide stability and longer service life.
  • Performance 2.5''Muffler size--2.5''inlet 2.5''outlet| Body Length: 7"| Overall Length: 13"| Body Height: 4" | Body Width: 9.5" | Inlet: 2.5" ID.
  • Adaptability-The universal 2.5 muffler exhaust is fit on most vehicles, and only requires clamps or welding for installation..
Check Stock

Motorcycle Mid Pipe, Motorcycle Exhaust Mid Header Pipe Stainless Steel Replacement for AFRICA TWIN CRF1000L ADV 2016 ‑2019

  • —Preferred Material—Motorcycle Exhaust Middle Link Pipe is made of high strength stainless steel, non-deformation, damage and maximum durability. Manufacturing meets stringent quality requirements. As an important part of exhaust pipe, high strength and high temperature resistance. Precision cast to make sure its easy installation and perfect fitment..
  • —Great Application—This Motorcycle Exhaust Middle Link Pipe is designed for NC700S NC750X NC750S NC700X 2012-2017.Please kindly confirm the fitment before ordering to make sure this item is perfectly fit..
  • —Primary Performance—Good Performance of Motorcycle Exhaust Middle Link Pipe in reducing the exhaust noise and temperature, which can make your motorcycle roar with outstanding sound and helps to obtain maximum output, increase the exhaust performance. Extend life of the exhaust muffler system. It is not easy to form ponding. Won't rust exposed to high temperature or rain..
  • —Easy Installation—Easy and convenient to install and remove. The clamp can adjustable and detachable. It is your best choice to make your motorcycle better..
  • —Warranty—Buy with confidence! We offer the 365-Day warranty and lifetime support. If you have any question on use, kindly contact us at any time directly, w....
Check Stock

Qiilu Tail Throat 2.5in Stainless Steel Tail Throat Luminous Exhaust Tip with LED Universal Auto Modified Parts Red

  • [ 304 Stainless Steel ] --- 100% high quality material.This exhaust tip is made of 304 stainless steel, which is more resistant to high temperature....
  • [ High Temperature Resistance ] --- Tail Throat is a brand-new high-quality after-sales product, more stable operation under high temperature....
  • [ Wide Application ] --- 63mm / 2.5in inlet, 89mm / 3.5in outlet, red and blue optional LED light color, universal exhaust end pipe, wide application,....
  • [ Illuminated Exhaust Tip ] --- Fashionable and dazzling, high temperature resistant LED lamp, there will be a blue flame effect after installation,....
  • [ Easy Installation ] --- ①Install theluminous tail throat with a buckle on the exhaust pipe of the original car②Adjust the position, tighten the....
Check Stock

HNHYNSY 1/8\ 1/4\ 3/8\ 1/2\ Female x Male Thread 90 Deg Brass Elbow Pipe Fitting Connector Coupler for Water Fuel Copper (Thread Specification : 1\)

  • Generally speaking, the raw material stainless steel is generally non-magnetic. However, due to a series of processes such as processing, smelting, and heat treatment, a small amount of martensite or ferrite structure will appear in austenitic 304 stainless steel. Therefore, 304 stainless steel will have weak magnetic properties..
  • This product is made of 304 stainless steel, which is hard and not afraid of high temperature and low temperature, which effectively prevents the phenomenon of pipe joints from cracking..
  • Built-in screw cap reinforcement to make the connection between the water pipe and the elbow more stable and not easy to break.
  • The inner wall of the water pipe is smooth, and the sealing is strong, which strengthens the stability of drainage and exhaust, and the resistance is reduced, the faster the conveying.
  • Suitable for water pipe transfer, natural gas gas transfer, sewage treatment water pipe transfer.
Check Stock

P Tec Products Low Profile Vent White

  • The Low-Profile Vent is commonly used in apartments and homes, especially for new vent installations. It is installed over exhaust ducts from: dryers, bathrooms, stoves or range hoods..
  • Increased airflow and decreased drafts – Keep out birds, insects, rodents, scorpions and more..
  • Magnetic outer door retention to prevent door flapping in gusty conditions..
  • Safer than traditional vents with reduced lint-build-up..
  • Installs in minutes, cleans in seconds -Reduced clothes drying time..
Check Stock

Exhaust Front Mid Link Pipe,Motorcycle Exhaust Mid Header Pipe Stainless Steel Replacement for AFRICA TWIN CRF1000L ADV 2016 ‑2019

  • ◇[Excellent Performance] - This middle link pipe is connected to the silencer tube and will not rust even when exposed to high temperature or rain. The product also has good performance in reducing exhaust gas temperature and is not easy to form water..
  • ◇[Perfect substitute] - Motorcycle middle tube design, easy to install. A good alternative to old or broken. You don't have to worry about installation problems at all. This steel intermediate tube is easy to install and can directly replace the original middle tube. Good performance in reducing the exhaust temperature..
  • ◇[Compatibility] - This exhaust middle pipe is designed for Honda MSX125 2013-2015. These parameters are very important for the suitability of your car, please don't ignore it..
  • ◇[Durable] - Made of high-strength stainless steel, -resistant and durable. Our motorcycle middle exhaust pipe use strict quality control standards, improved design, advanced production processes and more durable intermediate connections..
  • ◇[High-profile decoration] - This exhaust connect pipe is stylishly designed to provide bold decoration for your motorcycle. This is the best choice for making your motorcycle better. 100% new aftermarket exhaust pipe mid section..
Check Stock

FMF Megabomb Header with Mid Pipe - Stainless Steel for 20-22 Husqvarna FE501HQ

  • ❤️ High quality: Motorcycle Exhaust Middle Pipe used to measure the water temperature of cars. Professional manufacturing, more robust and durable. Make your vehicle work more efficient. Professional manufacturing, high precision and stable performance. Solve all the problems you encounter during use. This water temperature meter is made of high-quality stainless steel, with high hardness, rust resistance, durability and long service life. - escape cb500x.
  • ❤️ Easy to operate-----The water thermometer follows strict quality control standards and specifications, with high sensitivity and easy operation. The measurement range is 40~120 degrees Celsius. - slip on exhaust motorcycle.
  • ❤️ High precision ---- The numbers and pointers of this product can clearly display the water temperature, a....
Check Stock

Vance & Hines Eliminator 400 Slip Ons Chrome with Chrome End Caps 16714

  • 【Stainless Steel Material】- Exhaust muffler tail pipe tip, made of high grade stainless steel, durable in use, corrosion resistance and rustproof, added high-temperature coating process, high temperature and rust resistant and superior longevity, strong practicability..
  • 【Lower Noise Muffler】This muffler can effectively reduces DB sound levels from louder exhaust systems..
  • 【With great decoration】 - Stylish design, become the eye-catching decoration of your motorcycle,Helps your motorcycle obtain maximum output, ensuring its top exhaust performance.
  • 【Wide Fitment】- Widely fits to most brands of Motorbike,ATV and scooters with 51mm diameter exhaust pipes,Compatible with Moto Guzzi, Harley,Honda, Kawasaki, Suzuki, Yamaha, Cruiser, Scooter, Victory.
  • 【Easy To Install】- Easy to install this Exhaust muffler without modification, You just need to pull out the old noise sound eliminator and replace it with this product..
Check Stock

Exhaust Clamp Stainless Butt Joint 2.5' Band Clamp 2Pcs Exhaust Sleeve 2.5Inch 304 Stainless Steel Pipe Clamp Butt Joint Exhaust Muffler Clamp Band(2Pack)

  • HIGH QUALITY ---- Our 2.5inch exhaust clamp are made from high quality 304 Stainless Steel and plating zinc, Can resist the corrosion and rust from water..
  • Universal fitment.Joins 2.5" OD pipe to 2.5" OD pipe, you would better measure before pruchase..
  • These exhaust clamps feature unitized construction which minimized part number complexity and maximizes material efficiency for reduced weight..
  • Easy to install:Butt joint band clamps is a simple, effective way to connect exhaust system components such as pipes, mufflers and catalytic converters. Unique seal and high clamp loads are provided without distorting your exhaust components, allowing the flexibility to disassemble for service..
  • NOTE: Please check the size of the prouducts pictures,type and shape to make sure the item is the one that you need.If You Have Any Problems ,Take Time To Contact With Us,We Are In 24 Hours Service !.
Check Stock

MagnaFlow Cat-Back Performance Exhaust System 17876 - Pro Series, Stainless Steel 5in Main Piping, Single Passenger Side Rear Exit, Satin Finish Muffler with No Tip - Ram Truck Exhaust Kit

  • AGGRESSIVE SOUND/PRO SERIES - This diesel performance exhaust is designed to increase power and sound without sacrificing comfortable levels of interior noise. Fast-flowing mandrel bent pipes with straight-through mufflers facilitate reduced exhaust restriction and that signature MagnaFlow sound. Specifically designed for the 2003-2007 Dodge Ram 2500/3500.
  • CAT-BACK PERFORMANCE - The system is 50-state legal, features 5” mandrel bent tubing and is designed to replace the original exhaust components following the last emissions device. Features a satin finish muffler and no tip with a no hassle emissions legal design.
  • BOLT-ON INSTALLATION - MagnaFlow utilizes state-of-the-art 3D scanning technology during the research and development process to ensure that this exhaust system will fit and outperform the original equipment. CNC precision robotic manufacturing and mandrel bent tubing allow for hassle-free bolt-on installation.
  • STAINLESS-STEEL CONSTRUCTION - Highly corrosion resistant, Stainless-Steel construction incorporating CNC precision robotic manufacturing for quality fitment and longevity. Built to be the exhaust that lasts the lifetime of your vehicle.
  • STAINLESS-STEEL CONSTRUCTION - Highly corrosion resistant, Stainless-Steel construction incorpora....
Check Stock