Reviews Red Dot For Shotgun

Burris SpeedBead Red Dot Reflex Sight (Remington 870 12 Gauge), Black, Model:300245

  • Designed for the shotgun shooter looking for a fast and easy sighting solution.
  • The shotgun mounting system is the only red dot sighting solution for shotguns.
  • Includes a Burris Fast Fire III 8-MOA red dot sight and a Speed Bead mount that secures the optic between the receiver and rear stock.
  • Mounts low, aligning the red dot low and just above the bore.
  • keeps the center of the optic directly in line with the rib.
  • The target and red dot stay in focus without the shooter lifting his head unnaturally.
Check Stock

Burris SpeedBead Mounting System with Fastfire 3 Shotgun Sight, Beretta Xtrema/2, 391, 391 Light, Urika/2, Black, One Size (300244)

  • Designed for the shotgun shooter looking for a fast and easy sighting solution.
  • The shotgun mounting system is the only red dot sighting solution for shotguns.
  • Includes a Burris Fast Fire III 8-MOA red dot sight and a Speed Bead mount that secures the optic between the receiver and rear stock.
  • Mounts low, aligning the red dot low and just above the bore.
  • keeps the center of the optic directly in line with the rib.
  • The target and red dot stay in focus without the shooter lifting his head unnaturally.
Check Stock

Monstrum Micro Red Dot Mount for Mossberg 500/535/590/835/Shockwave Series Shotguns | Compatible with Venom/Viper/Fastfire/Docter Standard Red Dots

  • For direct mounting of micro red dots to Mossberg 500/535/590/835/Shockwave Series shotgun models.
  • Available in either Docter or RMR standard footprint patterns. Refer to compatibility chart to confirm compatibility with your micro red dot..
  • Mounts directly into the factory mounting holes of Mossberg 500/535/590/835/Shockwave Series shotguns with no additional hardware required.
  • Package includes multiple screw sets of different lengths for compatibility between red dot manufacturers. Please use the set screws that match the depth of your red dot mounting holes..
  • All Monstrum mount and accessory products come with a lifetime guarantee.
Check Stock

The Expats' Guide to Singapore: Finding Your Feet on the Little Red Dot

  • Fully multi-coated glass offers both a distinct red dot as well as a clear and untinted picture. Choose between 10 brightness levels including 2 dim enough for enhanced brightness visuals in pitch black darkness(these cannot be seen by the naked eye)..
  • The Red Dot is ready to use on your rifle or shotgun with picatinny mount adapter. Tested for extended time in freezing conditions, fully submerged, and under high pressure streams. More than capable for use in the raid or snow..
Check Stock

CVLIFE 1X22X33 Red Green Dot Gun Sight Scope Reflex Sight with 20mm Rail & CVLIFE Shotgun Ammo Sling Adjustable 2 Point Rifle Sling Holds 15 Shells

  • 【Gun Sight - Reflex Sight Reticle Type】Reflex Sight Reticle Type: Circle Dot, Cross, 10 MOA & 3 MOA(Red and green illuminated).
  • 【Gun Sight - 4 Reticle Patterns】4 reticle patterns offer unlimited eye-relief and corrected parallax..
  • 【Shotgun Sling - Length and Width】The two shotgun ammo sling is adjustable, from 108cm to 155cm (including spring hooks), and the width is 5cm..
  • 【Shotgun Sling - Shotgun Shell Holder】The two shotgun sling can hold up to 15 shotgun shells, for 12 or 20 gauge, so you can carry shells at all times to avoid to find shells everywhere..
Check Stock

Vortex Optics Venom Red Dot Sight - 3 MOA Dot Hat

  • ...o control dot intensity if the shooter prefers..
  • 1 MOA windage and elevation adjustments are super sleek and make sighting in a breeze. The top load system makes chaging the CR1632 battery a breeze, as you will not have to remove your sight to change the power source..
  • The Venom Red Dot will fit well on your rifle or shotgun giving you optimal flexibility. Vortex Optics hat included.DescriptionVortex Venom 3 MOA Red Dot SightUnlimited Eye Relief and Parallax Free AttributesFully Multi-Coated Optics - Sharp Point of ViewBright, 3 MOA Dot Reticle - Precise and Easy to SpotSleek, Flush, 130 Max Windage and Elevation AdjustmentVortex Cap (Realtree Max-1 XT Camo)Look great in this Realtreecamouflage capKeep your head hidden when its time to go stealthAdjustable Velcro back closureEmbroidered design.
Check Stock

Cyelee WOLF0 Micro Reflex Red Dot Sights with Shake Awake (RMR Pistol Cut) 3 MOA Reticle

  • Cyelee WOLF0 micro red dot sight is use RMR Cut footprint. Will fit any pistol mounting plate/slide/cut that is compatible with Trijicon RMR/SRO, Holosun 407C/507C/508T footprint red dots.
  • Cyelee WOLF0 feature Shake ‘N Wake motion sensing illumination tech to help save battery life. After 2 minutes without motion, illumination shuts off. Even the smallest tap or tilt will wake it up to the previous brightness setting. This allows daily carry without wasting battery life..
  • The WOLF0 Red Dot Sight-3 MOA promotes rapid target acquisition while providing a precise point of aim.
  • getting shots down range and on target fast. The WOLF0’s aluminum housing ensures this unit will stand up to whatever you throw at it..
  • High quality, fully multi-coated lenses offer a clean, wide field of view. Power and dot intensity controls are conveniently located on the two side of the sight to choose between 10 brightness levels..
  • The Cyelee WOLF0 Red Dot will fit well on your rifle or shotgun, giving you optimal flexibility.Special design prevent sunshine, dust and debris from penetrating for reliable performance in all environments.
Check Stock

Vortex Optics Venom Red Dot Sight - 3 MOA Dot

  • The Venom Red Dot Sight-3 MOA promotes rapid target acquisition while providing a precise point of aim.
  • getting shots down range and on target fast. The Venom's aluminum housing ensures this unit will stand up to whatever you throw at it..
  • High quality, fully multi-coated lenses offer a clean, wide field of view. Power and dot intensity controls are conveniently located on the left side of the sight to choose between 10 brightness levels..
  • The Venom also has an auto-brightness mode that uses an ambient light sensor to control dot intensity if the shooter prefers. Parallax Free.
  • 1 MOA wind age and elevation adjustments are super sleek and make sighting in a breeze. The top load system makes changing the CR1632 battery a breeze, as you will not have to remove your sight to change the power source..
  • The Venom Red Dot will fit well on your rifle or shotgun giving you optimal flexibility.O-ring seals prevent moisture, dust and debris from penetrating for reliable performance in all environments.
Check Stock

Cyelee CT2 Micro Shake Awake Red Dot Sights ( for RMR Cut Pistol ) 3 MOA Reticle, Black

  • The Cyelee CT2 micro red dot is designed to fit any pistol mounts/slides that are compatible with RMR/SRO footprint or Holosun 407C/507C/508T footprints..
  • The 3 MOA Red Dot promotes rapid target acquisition while providing a precise point of aim.
  • getting shots down range and on target fast. The CT2's aluminum housing ensures this unit will stand up to whatever you throw at it..
  • High quality, fully multi-coated lenses offer a clean, wide field of view. Power and dot intensity controls are conveniently located on the left side of the sight, choose from 10 brightness levels..
  • Change batteries without having to unscrew/remove the optic from the pistol! Stays on with shake awake! Conserves battery life but ready to go in a split second..
  • The Cyelee CT2 Red Dot will fit on your rifle or shotgun as well, giving you optimal flexibility. O-ring seals prevent moisture, dust and debris from reaching internal components, for reliable performance in all environments.
Check Stock

TASCO Propoint Red Dot_1x30_3MOA_TRDPCC, Black

  • [TASCO PROPOINT] is a quality optics line designed in the USA, shipped all over the world. Today, Tasco offers telescopes and other optics such as spotting scopes and binoculars, as well as rifle sights and accessories..
  • [PROPOINT] is a do-all RED Dot designed fro the hunter, for range use, or plinking. 3 MOA with 6 brightness settings..
  • [RUGGED CONSTRUCTION] Designed, constructed, and tested to withstand the recoil energy of a rifle. Solid aluminum construction..
  • [FEATURES] Versatile mounting options for shotgun, MSR, or pistol. Multi-coated optic. Adjustable illumination..
Check Stock

ToopMount 1X28 Red Dot Sight Lightweight Rifle Scope Outdoor Sport Dot Sight Tactical Sight Red Fiber Optic Dot Sight Fully Coated Dot Sight, Circle with Center Dot

  • ...Impact Point: The front and rear center grub screws are used to adjust the point of impact. Tightening the front will lower the point of impact, and tightening the rear will raise the point of impact..
  • Notice: NOT Applicable for 11MM rail way. Come with FOUR Screws for fixing the red dot on the dedicated rail of the shotgun. Please refer to the last image. Welcome to contact us if you have any question or concerns about our red dot sight, our customer staff will help you to solve the problem as soon as possible..
Check Stock

AIMPRO 3 x Magnifier and Red Dot Scope Combo with Flip to Side Mount

  • Crisp 4 MOA Red or Green Dot with 1/2 MOA per Click W/E Adjustments , perfect for close range or long distance shooting..
  • Sealed and Nitrogen Filled, Waterproof, Fog Proof and Shockproof, Rated for 800G of Impact so its Ideal for Heavy Recoil Shotgun or Rifle....
  • Built-in W/E Adjustable Powerful Red Laser Class IIIa .
  • 3x Magnifier with Reversible Flip to Side Mount for Long Distance Shooting, Can be set to Flip Left or Flip Right and is Compatible with Most Low....
  • Superior Quality Glass Multi-Coated Lenses for Clear Sight Picture with no Distortion.
Check Stock

Hammers Shotgun Scope Saddle Mount for 12GA Remington 870 1187

  • Great for slug shooting or turkey hunting or tactical shotgun use.
  • Easy to install in existing pin ports on the receiver – no gunsmithing or special tools required.
  • Solid one piece design of saddle style that straddles both sides of receiver.
  • Top Picatinny rail is 6inch long and has 14 ring slots for proper scope or red dot sight placement.
  • Machined aluminum alloy body in anodized non glare matte finish.
Check Stock