Reviews Recycled Filament

Polymaker PETG Filament 1.75mm, 1kg Strong PETG Black Filament Cardboard Spool - PolyLite PETG 1.75mm Black 3D Printer Filament, Print with Most 3D Printers Using 3D Filaments

  • 【Good Mechanical and Thermal Properties】 - More than 12 different colors and effects for your day-to-day creations. PolyLite PETG is designed for your special inventions and strong gadgets. PETG features 80˚C (144˚F) heat resistance and a higher toughness than regular PLA Selected color: Black PETG filament 1.75mm ( PETG Black Filament ).
  • 【Tangle Free & Moisture Free】 - PolyLite PETG is carefully winded to avoid any tangling issues, dried and vacuum sealed in a resealable ziplock bag with desiccant. Please make sure to NEVER let go the tip of the filament as it may create nodes. Holes on the side of the spool can be used to prevent this issue.
  • ️ 【Good Layer Adhesion & Rigidity】 - No warping, no jamming, no blobs or layer delamination issues. PolyLite PETG is a worry-free 3D Printer Filament Black which has great bed adhesion, very consistent color and dimensional accuracy.【Note - turn off the fan for the first layer for improved bed adhesion】.
  • ♻️ 【Cardboard Spool】 - Comes in upgraded 3.0 version packaging with fully recycled cardboard spool and box.
  • ⚙ 【Printing Settings】 - Nozzle: 235˚C.
Check Stock

DURAMIC 3D PLA Filament 1.75mm Forest Green, 3D Printing Filament 1kg Spool(2.2lbs), No-Tangling No-Clogging Dimensional Accuracy +/- 0.05 mm, Consistent Performance for 3D Printer

  • ... 99.9% ±0.04mm, 99% ±0.03mm and 97% ±0.02mm..
  • 【User Friendly】The length scale and weight scale make it easy for you to monitor the remaining length and weight roughly. Empty spool weight: 140±15g, you can get the exact weight of remaining filament if you need to..
  • 【Consistent Color & Material】We never use recycled raw material. We always stick to high-graded pla raw material to ensure consistent quality both on material and color..
  • 【Upgraded Cardboard Spool】Duramic 3D Pinter PLA filament 1.75mm use cardboard spool along with dual stickers, which allows convenient sorting and full recycling. The filaments remain the same formula and quality..
  • 【Reconmmended Printing Settings】Nozzle Temp: 205±15C, Bed Temp: 30-60C, Printing speed: 30-70mm/s..
  • 【Risk-free Service】One-month free trial, lifetime quality promise and technical printing support and money-back service if you’re not 100% satisfied..
Check Stock

eSUN Wood PLA Filament 1.75mm, Wood PLA 3D Printer Filament, 0.5KG Spool 3D Printing Filament for 3D Printers, Wood Color

  • ...No Plugging】Full 0.5KG 3D printer filament reel, perfect roundness and very tight diameter tolerance, does not overlap or tangle, less stringing, strong layer adhesion. Melt well, feed smoothly and constantly without clogging the nozzle or extruder..
  • 【Environmental Friendly PLA】Wood PLA is a mixture of PLA and recycled wood particles, which produces natural wood effect. Made with starch raw materials derived from renewable plant resources, biodegradable and eco-friendly, non-toxic and low odor..
  • 【Vacuumed Sealed Packaging】0.5KG Spool Wood PLA Filament comes in a sealed vacuum bag with a desiccant bag, easily keep your 3D printer filaments at an optimal storage condition and free from dust or dirt before opening the vacuumed sealed packaging..
Check Stock

Mizuno Men's Standard Infinity Hoody, Black, Large

  • MIZUNO DRYLITE Moisture Management: Using a dual filament yarn construction to transport excess moisture away from the body to create a comfortable and dry body microclimate for best performance..
  • Eco Friendly Materials: Recycled materials.
Check Stock

Mizuno Men's Standard Infinity Hoody, Quiet Shade, X-Large

  • MIZUNO DRYLITE Moisture Management: Using a dual filament yarn construction to transport excess moisture away from the body to create a comfortable and dry body microclimate for best performance..
  • Eco Friendly Materials: Recycled materials.
Check Stock

20Pcs 3D Printer Drawing Paper Drawing Template Paper Molds for 3D Printing Pen with 40 Cartoon Patterns Kids DIY Gift

  • [Recycled use]:Use slim and soft papers, can be recycled use, environmental friendly..
  • [20Pcs paper models for practice]: It come with set up, can show the user how to create a satisfied model, which help to develop a child's....
  • [40 cartoon patterns]: Contains a variety of cartoon patterns, children will be interested in it. Help children develop their interest in drawing and....
  • [3D drawing paper]: Fit for most types of 3D Printer pens ,all types of 3D Pen Filament Refills to drawing on the paper..
  • [Dimension]: Each paper is with two patterns: positive and negative, 250mm ¡Á 170mm..
Check Stock

Rubbermaid Commercial Products FGT85206GR00 Microfiber Tube Mop Head (Medium, 5" Headband, Green) (3 PACK)

  • Designed for maximum floor contact and absorbency.
  • Constructed with a blend of continuous-filament microfiber and polyester.
  • Tube design reduces drag for more productivity.
  • Contains up to 50% PET plastic recycled content.
Check Stock

SUNLU Filament Dryer, 3D Printer Filament Storage Box, 360° Surround Heating, Touch Screen, Humidity Detection, Dryer Box for Nylon PA ABS PETG PLA Filament 1.75/2.85/3.00mm, FilaDryer S2, Black

  • ①【Importance of Filament Dryer】Any material of filaments will absorb moisture from the air, filament being old or in high humidity place may absorb a lot. Damp filament will cause many printing issues, filament dryer can remove moisture from the damp filament..
  • ②【Keep Filament Dry During Printing】The filament dryer can be used as a filament spool holder, so filaments can be dried during 3D printing, it can improves print quality. If the 3D printer is in basement or orther humid place, it's more important to keep filament dry..
  • ③【Bring Damp Filament Back to Live】Filaments that have been stored for a long time may have absorbed a lot of moisture, filament dryer is specifically made for drying 3d printer filament, it can effectively remove excess moisture to save the old filament..
  • ④【Fast Heating and Even Drying】SUNLU filament dryer can heat up to preset temperature quickly, the built-in spindle keeps the filament spinning continuously, heating evenly. Adjustable drying time range: 0-99 hours, adjustable drying temperature range: 35-70 ℃..
  • ⑤【Very Simple but Very Effective】SUNLU filament dryer is very easy to use, FilaDryer S2 is equipped with a large touch screen, you can set different dry temperatures and dry times for diffe....
Check Stock

Rubbermaid Commercial FGJ85700GR00 Microfiber Blend Looped-End Dust Mop, 48-inch, Green

  • Combination of continuous filament bi-component Microfiber yarn and blend mop yarns provides superior cleaning efficacy..
  • Microfiber yarns let these advanced products withstand twice the laundry cycles of standard dust mops..
  • Use with traditional mop tools. No adapters needed..
  • Environmentally sustainable construction: contains 42% post-consumer recycled PET plastic (soda bottles) and 28% postindustrial cotton..
  • LEED point-qualified.20 inches long by 18.75 inches wide by 14.75 inches high. 1.492 pounds. Made in the USA..
Check Stock

SUNLU PETG 3D Printer Filament, PETG Filament 1.75mm Dimensional Accuracy +/- 0.02 mm, 1 kg Spool, PETG Blue

  • 【8 Rolls of 0.25kg 1.75mm PLA Filament, Multiple Color Choices】8 rolls of 250g SUNLU 1.75mm PLA filament.Color:Black+White+Grey+Burly Wood+Purple+Blue Grey+Grass Green+Pure+Yellow.The design of 250g PLA filament is convenient for customers with multiple color needs.Especially for multi-nozzle 3d printer users and 3d pen users..
  • 【SUNLU Toughness-enhanced PLA Filament】 SUNLU premium PLA filament offer the advantage of incredible ease of 3d printing.SUNLU PLA filament,optimized print quality,high purity with low shrinkage and superb interlayer adhesion.Meet your needs for 3d printing projects on functional parts with higher toughness..
  • 【High Precision +/- 0.02mm Tolerance PLA filament】: 1.75mm PLA 3D filament(Tolerance Level : ± 0.02mm).0.25KG 3d printer filament reel,perfect roundness and very tight diameter tolerance,approximately 68m of PLA filament on each spool ease of use,minimal warping,no clogging,no bubbles.Increase your 3d printing objects delicacy..
  • 【No Clogging, no Bubbles and Good Adhesion】Better flow of SUNLU no plugging premium 1.75mm PLA filament.It has consistent diameter & roundness,less stringing and warping,strong layer adhesion.Article-free and impurity-free.No impurities,no clogged.Recommended PLA Filament Extrusion/N....
Check Stock

3D PETG Filament 1.75mm Black 3D Printer Filament 1kg Spool PETG Filament Dimensional Accuracy +/- 0.02 mm PETG Black XVICO

  • 【PETG Filament Printing Tips】 petg 3D filament has the advantages of high purity with low shrinkage and superb layer bonding, Filament 1.75mm meeting your demands for different printing projects. 1.75 petg Filament 100% made of environment-friendly natural materials, harmless to users and the environment.petg Filament Recommended Extrusion/Nozzle Temperature 230°C – 240°C, Bed 70°C – 80°C..
  • 【petg filament 1.75mm Clog-free & Bubble-Free】3D Printer Filament approximately 2.2 LBS 1 KG Spools.petg filament Completely dried for 24 hours before packaging and vacuum sealed with desiccants in nylon re-bag, enable much smoother and more stable printing. Since the petg filament is prone to moisture, please store it into a re-sealable aluminum foil bag after unsealing to maintain excellent printing performance..
  • 【PETG Filament Less-tangle & Wide Compatibility】3D Petg Filament Full mechanical winding and strict manual examination, which guarantee the Petg filaments tidy and easy to be fed.The 1.75mm filament You don’t have to worry that it will be incompatible with your 3D printer — 1.75 mm in diameter, dimensional accuracy +/- 0.02 mm. It works perfectly with most FDM 3d printers on the market..
  • 【3D Petg Filament ACCURACY & CONSISTENCY】....
Check Stock

ERYONE Silk Dual Color Filament PLA 3D Printer 1.75mm, +/-0.03mm, Coextrusion Filament PLA Shiny Filament 1kg(2.2lbs), Red Green

  • 1.【Silk Dichromatic Filament】ERYONE dual-color silk filament is made from two individual colors, extruded into one filament strand.You can change the visible color by rotating the color-blending filament to different orientations..
  • 2.【High Accuracy Silk Filament】The diameter of the blended dual color silk filament is 1.75mm with a tolerance of +/-0.03mm. Dichromatic PLA filament feed smoothly and constantly without clogging the nozzle or extruder making you a smoothly printing & better surface..
  • 3.【No Warping Multicolor Filament】Perfect winded silk blended color pla filament,tangle-free before unopened, no stringing and warping.Universal compatibility with most FDM 3D printers and 3D Pens..
  • 4.【Strong Layer Adhesion】This silk PLA filament has perfect first layer adhesion to reduce warpage, shrinkage, curl and print failure.1.75mm Dual color silk 3D printer PLA Filament is no bubble,strong layer adhesion make the printing parts stronger..
  • 5.【Silk Effect Filament】When printed with this 3D printing silk dual color filament, it creates a really unique look on your parts! Multicolor silk filaments can output with incredible pearlescent and gorgeous silk surface..
Check Stock

Inland 1.75mm PLA PRO (PLA+) 3D Printer Filament Refill, 1KG (2.2lbs) Spooless Filament, Dimensional Accuracy +/- 0.03mm, Blue Refill for Inland Reusable Spools

  • PLA+ FILAMENT REFILL SPECS: 1 KG (approximately 2.20 lbs) Per Refill 1.75mm Filament Diameter (Dimensional Accuracy +/- 0.03mm).
  • SPOOLLESS FILAMENT PRINT SETTINGS: Recommended Extrusion/Nozzle Temperature: 210°C - 225°C (410°F - 437°F) Recommended Bed Temperature: 60°C -80°C (140°F - 176°F).
  • INLAND REFILL FILAMENT: Designed with the highest quality and compatibility in mind, Inland PLA+ Filament undergoes numerous testing procedures to ensure you spend less time troubleshooting and more time printing! Your filament will arrive completely dry and vacuum sealed with desiccant to ensure a high-quality, smooth print. You can expect the same print quality as Inland PLA+ Filament, without the spool!.
  • USE LESS PLASTIC WITH PLA PLUS REFILL: PLA+ Filament is non-toxic and comes without a spool. PLA+ is less brittle than standard PLA, improving your prints' toughness and layer adherence. We also offer the Inland Reusable Spool that perfectly fits this refill! Use less plastic and use the same Spool with every new filament refill..
  • EASY-TO-USE: Inland Spooless PLA+ Filament melts evenly and feeds smoothly into your 3D Printer creating defined corners with minimal warping and no odor. Produce your best print with our no-clog, bubble-free filaments. Inland fi....
Check Stock