Reviews Rear Wheel Bearing Bushing Tool

OEM TOOLS 27213 Master Wheel Hub & Bearing Remover & Installer Kit Back & Front Wheel Bearing Puller Kit Back & Front Wheel Hub Puller Easy to Use

  • NO SHOP PRESS NEEDED: Remove the need for a shop press with our wheel hub bearing press tool.
  • Save time removing even seized-up wheel hub and bearing....
  • FOR PRO AND DIY MECHANICS: This wheel bearing puller/installer is one of the only tools for servicing front and rear wheel hubs and bearing on German....
  • TIME-SAVING BEARING TOOL: No need to remove the strut assembly or knuckle to remove/install the hub and bearing.
  • VARIETY OF ADAPTERS: Service your vehicles easily with our rear and front wheel bearing removal kit.
  • This wheel bearing removal tool features all the....
  • DURABLE STEEL CONSTRUCTION: Our rear and front wheel drive bearing adapter kit's steel design holds up to the torque required to remove hubs and....
Check Stock

DASBET 16PCS Blind Inner Bearing Puller Hole Remover Extractor Set Slide Hammer Tool Kit

  • 【Applicable】This inner bearing puller set is designed for loosening and pulling tight bearings and bushings, and fit for all vehicles 8-53MM bore bearing..
  • 【Instructions to operate】: How to use? Firstly insert the correct collet in the bore of the bearing and turn the nut to expand the collet till it is secure within the bearing.
  • Attach the small slide hammer and yank the weight towards the handle to give an extra snap of weight.
  • Repeat action until the bearing or bushing has been removed.
  • U-shaped bearing seal puller can be used by threading the bushing puller onto the collet and tightening the nut to slowly pull the bearing out of place..
  • 【Usage】This slide bearing removal tool is designed to quickly finish the job without damaging the removed parts or the tool. This small bearing puller tool is ideal for professionals and do-it-yourselfers..
  • 【Sturdy Construction】: Constructed of a strong, durable carbon steel, the bearing extractor tool is sure to pull even the toughest wheel bearing and bushings from tight positions. This blind bearing puller set has a long steel rod and a T-bar handle. The flared ends of the shop hammer weight provides a sturdy grip. The forged hardened steel and rust-proof finish help to increase pulling strength an....
Check Stock

OEMTOOLS 27212 Manual Bushing Installation and Removal Tool Set, Bushing Removal Tool, Bearing Press Kit, Bushing Tool Kit, Tool Kit Push Pull Bushing

  • EASY TO USE: The bushing puller kit cuts down on frustration and expended energy during difficult wheel bearing, suspension bushing, and seal removal and installation repairs.
  • WIDE RANGE OF USE: The adapter cups with the bearing puller set provide a wide range of options to fit your exact repair needs.
  • The OEM Tools bushing driver set includes 20 different size cups for versatile use.
  • ELIMINATE DAMAGE: The metric bushing driver set reduces the possibility of damaging the bearing/suspension housings.
  • Don’t have to remove components from vehicles with this bushing tools set.
  • ADAPTABLE: The bushing installer kit comes with an adapter to use bushings with shop press.
  • Plates and sleeves can be used in a standard workshop press when on-site access isn’t possible.
  • MORE USES: The bushing tool set works with silent bearings, hydraulic bearings, ball bearings, shaft seals, rubber bearings, and more.
  • Cups with bushing press and pull kit allow for hundreds of combinations.
Check Stock

E-cowlboy T-0220-39 Master Bushing Driver Set for Chrysler GM Ford Transmissions Bushing Bearing Seal Installer Remover Tool Kit (39 PCS)

  • 【Application】The custom bushing driver tool set is suitable for installing or removing wheel bearings, bushings, sealing rings and rubber. The tool is impact resistant and can be used with hydraulic presses and hammers..
  • 【Interchangeable】All 50 discs of the bush bearing and seal driver kit are interchangeable with each other and you can get 2,450 different size variations for quick work..
  • 【Quality Material】The bush removal puller bearing press tool is made of high-quality forged steel with a black anodized coating on the surface, effectively preventing rust and greatly extending the service life of the tool..
  • 【Custom Tool】8-65mm & 74mm metric discs. Each disc is marked with a scale for easy identification and reference. All metric discs, shafts, Allen keys, and screws remove or install bushings that are flush with the housing, allowing you to build your own custom bushing driver so that you always have the correct size for job..
  • 【Set Includes】The transmission wheel axle bearing seal installer kit includes: 48pcs*discs (18mm to 65mm with 1mm graduation) +1pc*disc (74mm) +1pc* handle/shaft +1pc*Allen wrench (3mm) +1pc*screw +1pc*storage box..
Check Stock

OEMTOOLS 37342 Master Wheel Hub and Bearing Remover and Installer Kit Back and Front Wheel Bearing Puller Kit Back and Front Wheel Hub Puller Easy to Use

  • NO SHOP PRESS NEEDED: The OEMTOOLS 37342 Master Wheel Hub and Bearing Remover and Installer Kit saves time removing even seized-up wheel hub and....
  • FOR PROFESSIONAL AND DIY MECHANICS: This wheel bearing puller/installer is one of the only tools for servicing front and rear wheel hubs and bearing....
  • UNIVERSAL APPLICATION: This wheel bearing removal tool features all the adapters needed to service a number of foreign and domestic vehicles, remove....
  • SLIDE-HAMMER-FREE REMOVAL: This wheel bearing tool and hub press makes it simple to remove and install wheel hub and bearing assemblies as well as....
  • WHEEL HUB PULLER KIT INCLUDES: Hub removal tool, Front wheel bearing adapters, Pusher Washers, Receiver Sleeves, Nut-Bolt, and Heavy Duty Bearing.
Check Stock

HFS (R 52-in-1 Custom Bushing Driver Tool Set and Transmission Wheel Axle Bearing Race Seal Installer Remover, Bush Removal Puller Bearing Press Tool Kit

  • [UNIVERSAL SIZES]: Bushing removal tool kit includes 50 interchangeable discs to build 2,450 custom bushing driver variations so you always have the right size for the job..
  • [COMPLETE SET]: The discs sizes range from 18mm (0.7 inches) all the way to 65mm (2.51 inches) in 1mm increments plus 74mm (2.91 inches). All discs are connected with a 12mm (.47 inches) shaft and screw which quickly connects to a 180mm (7.08 inch) handle, making for a complete and effective wheel bearing driver set..
  • [EASY OPERATION]: This auto tool kit includes a long handle shaft to simplify bearing race and seal replacement and help you remove or install wheel bearings quickly and professionally..
  • [HEAVY-DUTY DURABILITY]: With ultra-strong carbon-steel construction and black anodic oxidation coating for rust-resistance, this mechanic toolset will stand up to years of heavy use..
  • [PROTECTIVE CARRYING CASE]: Includes a heavy-duty, blow-molded case with precision-sized compartments for every piece - great for storage and transport while lengthening the life of the tool set..
Check Stock

Orion Motor Tech 52-in-1 Custom Bushing Driver Tool Set and Transmission Wheel Axle Bearing Race Seal Installer Remover, Bush Removal Puller Bearing Press Tool Kit

  • UNIVERSAL SIZING: This Orion Motor Tech bushing removal tool kit includes 50 interchangeable discs to build 2,450 custom bushing driver variations so you always have the right size for the job..
  • COMPLETE SET: The discs sizes range from 18mm (.7 inches) all the way to 65mm (2.51 inches) in 1mm increments plus 74mm (2.91 inches). All discs are connected with a 12mm (.47 inches) shaft and screw which quickly connects to a 180mm (7.08 inch) handle, making for a complete and effective wheel bearing driver set..
  • EASY OPERATION: This auto tool kit includes a long handle shaft to simplify bearing race and seal replacement and help you remove or install wheel bearings quickly and professionally..
  • HEAVY-DUTY DURABILITY: With ultra-strong carbon-steel construction and black anodic oxidation coating for rust-resistance, this mechanic toolset will stand up to years of heavy use..
  • PROTECTIVE CARRYING CASE: Includes a heavy-duty, blow-molded case with precision-sized compartments for every piece - great for storage and transport while lengthening the life of the tool set..
Check Stock

Orion Motor Tech 52-in-1 Custom Bushing Driver Tool Set and Transmission Wheel Axle Bearing Race Seal Installer Remover, Bush Removal Puller Bearing Press Tool Kit

  • UNIVERSAL SIZING: This Orion Motor Tech bushing removal tool kit includes 50 interchangeable discs to build 2,450 custom bushing driver variations so you always have the right size for the job..
  • COMPLETE SET: The discs sizes range from 18mm (.7 inches) all the way to 65mm (2.51 inches) in 1mm increments plus 74mm (2.91 inches). All discs are connected with a 12mm (.47 inches) shaft and screw which quickly connects to a 180mm (7.08 inch) handle, making for a complete and effective wheel bearing driver set..
  • EASY OPERATION: This auto tool kit includes a long handle shaft to simplify bearing race and seal replacement and help you remove or install wheel bearings quickly and professionally..
  • HEAVY-DUTY DURABILITY: With ultra-strong carbon-steel construction and black anodic oxidation coating for rust-resistance, this mechanic toolset will stand up to years of heavy use..
  • PROTECTIVE CARRYING CASE: Includes a heavy-duty, blow-molded case with precision-sized compartments for every piece - great for storage and transport while lengthening the life of the tool set..
Check Stock

27213 Master Wheel Hub and Bearing Remover and Installer Tool Kit, Back and Front Wheel Bearing Puller Kit, Back and Front Wheel Hub Puller

  • 【WIDE COMPATINILITY 】-- Universal, provides various size of adapters makes installing wheel hubs and bearings on most domestics and foreign cars-rear, front, and four-wheel drive much easier. Compatible with BMW/Benz/Porsche/VW and most domestic/Asian/European vehicles. Works on Front, Rear and All-Wheel Drive Vehicles..
  • 【UPGRADE DESIGN】-- Designed with slide-hammer-free removal, make the job much simple that can easily install the hub and bearing changes on most cars. Under without the use of a hammer or a shop press, only use this tool be able to easily remove and install wheel hub and bearing assemblies as well as inner bearings. Whether it is a professional or DIY mechanic, can be easily, accurately and safely completed the disassembly and installation of the wheel hub and bearing on the vehicle..
  • 【SUPERIOR MATERIAL】-- Made of solid carbon steel with resisting impact and no deformation, surface black anodized anti-rust finish to anti-rust and anti-corrosion for years of trouble-free use. Mold-blown plastic case is convenience to carry and storage. Alternative to OEM 27213, quality and function meet to OEM. High precision and hardness, designed with o....
Check Stock

Maureen 29090 Anchor pin Bushing kit (Truck)/Bushing Removal Tool/Bushing Tools, Black, 14.5 x 4.75 x 1.25

  • This professional grade subframe bushing installer and remover tool set is compatible with BMW E32 E34 E38 E60 E65 E66..
  • For replacing the subframe bushings without the need for removing the rear axle assembly..
  • The fine thread and thrust bearing allow the bushing to be fitted quickly without hassle..
  • It is Ideal for replacing the subframe bushings whilst still on the vehicle, and without the need for removing the rear axle assembly..
Check Stock

ABN Wheel Bearing Puller Kit Hub Removal Tool Wheel Bearing Tool - Independent Suspension Roll Ball Bearing FWD RWD AWD

  • [No More Hammer or Shop Press]: The ABN Master Wheel Bearing Removal Tool and Wheel Hub Puller Tool Kit allows you to remove and install wheel hub and....
  • [Fits Your Vehicle]: Universal for front, rear, and all-wheel drive vehicles with independent suspension and pressed roller-ball bearings.
  • [Use on Seized-Up Assemblies]: Self-centering mechanism and thrust bearing design.
  • Use the round plate that corresponds to the diameter of your....
  • [Perfect Sizes]: Universal set includes 21 pieces that have A through U permanently printed labels.
  • Pusher washer disk driver sizes from 2.1 inches....
  • [Contents]: Wheel hub and bearing puller set and installation kit includes a remover tool, adapter shoes, pusher washers, receiver sleeves, nut-bolt,....
Check Stock

bimiti Rear Suspension Control Arm Trailing Arm Bushing Tool Removal Tool Kit for Ford Focus Mazda Volvo Bushing Press Kit

  • 【Application】This rear suspension bushing removal tool has a wide range of application and strong practicality. It is suitable for Ford Focus MK1 & MKII 1998-2007, Ford Cuga 2008, Ford C-Max 2007, Mazda 3 sedan, hatchback 2003-2008, suitable for Mazda 5 CR, CW, MPV 2005, applicable to V50 2004-2012, applicable to S40 MK sedan 2003-2012..
  • 【Performance】This rear suspension bushing kit has excellent performance, protects your car from scratches, no marks or scratches, and is used to silently press in and pull out the rear of the shaft to improve safety and reliability..
  • 【Easy to use】Designed for the removal and installation of bushes and bearings, this rear trailing arm bushing tool is easy to use and install without the need to remove the rear axle, saving a lot of time..
  • 【Material】This control arm bushing removal tool is made of selected carbon steel. The greater the hardness, the higher the strength, but the lower the plasticity, the stronger the rust prevention, the longer the durability and the longer the service life..
  • 【After-sales Service】This rear control arm bushing kit has been strictly tested before leaving the factory.If you encounter any problems in the use process, please contact our customer service in time, and we wil....
Check Stock

OEMTOOLS 27059 Pilot Bearing Puller Attachment, Pilot Bearing and Bushing Removal, Fits 5/8” x 18” or 3/4” x 16” Threaded Rods , Black

  • EASY TO USE: The slide hammer bearing puller can be used in four steps: Insert the pilot bearing puller, turn the attachment housing expanding both jaws against the pilot bearing, attach a slide hammer, and use the slide hammer to remove the bearing.
  • SAVE MONEY: Getting a pilot bearing replaced in an auto shop could cost you up to $650.
  • You can save hundreds of dollars by using this one pilot puller.
  • VARIETY OF USES: Not only can this pilot bearing tool be used as a bearing puller, but it can also be used as a bushing tool on starters and generators.
  • This pilot bearing removal tool will also fit any 5/8” x 18” or 3/4” x 16” threaded rods.
  • DURABLE: Made from steel, this bearing and bushing removal tool can withstand years of regular pilot bearing jobs.
  • This blind hole bearing puller is built to last.
  • DIMENSIONS: This pilot bearing remover is easy to store anywhere at just 10.4" x 3.4" x 1.3". The blind bearing puller is also easy to wield, weighing in at just 13.6 ounces, making it a great pilot tool.
Check Stock