Reviews Rear Axle Shafts

NICHE Front and Rear Left and Right High Strength CV Axle Kit for 2003-2008 Yamaha Grizzly 660 5KM-2510F-11-00

  • Includes Front Left Axle, Front Right Axle, Rear Left Axle, Rear Right Axle.
  • Compatible with the 2003-2008 Yamaha Grizzly 660.
  • 25% Larger Joint and Shaft Diameters When Compared to Factory Specifications.
  • Durable Neoprene Boots Ultra-Low-Profile Boot Clamps Prevent Moisture or Water Damage.
Check Stock

NICHE Front Rear CV Drive Shaft Axle Set Kit for 2007-2012 Polaris Sportsman 500 800 1332881 1332935

  • Front Axle Replaces OEM Part Numbers: Polaris 1332881, 1332656, 1332501, 1332471.
  • Rear Axle Replaces OEM Part Numbers: Polaris 1332935, 1332654, 1332511, 1332421.
  • Compatible with: 2007-2012 Polaris Sportsman 500, 2007-2012 Polaris Sportsman 800.
  • Ultra Rugged 4340 Chrome-Moly Shafts and Joints, Puncture and UV Resistant Neoprene Boots, Low-Profile Boot Clamps, Resistant to Catching Debris.
  • Heat-Treated Bearings an Joints, Packed with High-Performance Moly Grease, Fully Assembled Including Inner & Outer Joints on the Shaft.
Check Stock

Bang II (Feat. Uppercase 5ive)

  • Fully milled gearbox housing made of 6061-T6 aluminum for the rear axle of ATOPRC.
  • Due to its dimensional stability results in a higher load capacity and service life of bevel gear and ball bearings. The problem of the torn fastening thread has an end with this case.
  • The bearing adapters are included in the set.
  • We recommend gluing the bearings with threadlocker y0113. For mounting the bearing adapters in the housing we recommend Bindulin silicone y19015. To use HD differential shafts y1477, the Atoprc bearing adapters must be machined.
Check Stock

Team Associated 20157 SC28 Fox Factory Edition Micro Short Course Truck Ready to Run Kit 1/28 Scale 2WD

  • Off road style front bumper with 2-piece LED.
  • Metal front CVA and rear solid axle shafts with 12mm hex adapters.
  • Black anodized aluminum battery/radio tray with hook-and-loop hold down strap.
  • Black scale 1.9 wheels with soft compound off road tires.
Check Stock

Team Associated RC8B4e Team Kit ASC80946 Cars Elec Kit 1/8 Off-Road

  • New rear hub features a symmetrical left and right common design with axle height inserts for adjustable roll center tuning.
  • New captured CVA drive shafts design front and rear with center dogbone driveline.
  • New chassis layout featuring two shorty-style only battery configurations..
  • New RC8B4e specific side guards are narrower and feature integrated wire routing clips.
Check Stock

Steel Rear Axle CVD Drive Shafts for 1/10 RC Axial Wraith 90018 90048 RR10

  • Come assembled for easy installation, Ultra high strength cross pins.
  • Increased size universal joint for maximum strength at the joint.
  • Some rubbing may occur initially at the link mount screws due to larger diameter shafts..
Check Stock

Ebike Universal Torque Arm for Electric Bicycle e-Bike Bike Front or Rear Hub Motors and Mid Drive e-Bike (T-2 for 16mm)

  • This universal torque arm conversion kit fit for electric bicycle e-bike.This product is suitable for normal motor shafts, except for special shafts.
  • The universal torque arm conversion kit is made of consistent quality antioxidant iron and aluminum. The surface is anodized to completely resist oxidation and corrosion, and to maintain a long-lasting, beautiful luster under light conditions..
  • Even though it's a universal design, please check the size & diameters to make sure it fits your bike..
  • Consistent quality steel arm, hub mount, and C-clamp. Comes ready to be installed on either front or rear axle.
  • We are committed to making riding safer,If you have any questions about this universal torque arm kit , please reply to us by email and we will help you resolve any issues as soon as possible..
Check Stock

MOSNAI Golf Cart Driver Side Rear Axle Shaft for EZGO TXT/Medalist 1994-2013 Electric Golf Cart, Replaces OEM 20377G11

  • ✅【Fit Models】Golf Cart Rear Splined Axle Shaft Fits EZGO TXT & Medalist 1994-2013 electric golf cart. (NOTE: Will NOT FIT RXV MODELS, NOT FIT GAS MODELS).
  • ✅【Replace OEM Part】The EZGO driver side axle replaces OEM part# 20377G11 20377-G11..
  • ✅【Product Size】Our EZGO TXT rear axle shaft meets OEM quality standards, the length is about 23 7/8" and has 24 teeth on both ends..
  • ✅【Replace Your EZGO Rear Shaft】When the axle is excessively noisy, Or possibly when the vehicle has difficulty moving in one direction or the other, this problem could be caused by a worn axle spline..
  • ✅【Package Include】 1 * EZGO driver side axle with rear axle nut..
Check Stock

WINMAX TOOLS AUTOMOTIVE 18 Pc Heavy Duty Axles Slide Hammer Dent Panel Bearings Gears Seals Puller Set

  • SHIPPING-IT will be shipped within 24hs, delivery in 7-12 days. Contact us if any problems..
  • This professional quality Slide Hammer Puller kit is ideal for use within the automotive industry for pulling bearings, gears and front wheel drive axle shafts..
  • This heavy duty slide hammer has a 5 lb. hammer to pack real punch. The slide hammer puller set pulls flange-type rear axles and most front-wheel drive hubs and the internal and external jaws provide a variety of combinations to pull bearings, gears and seals. The pack contain versatile puller assortment to let you handle all kinds of pounding and pulling operations..
  • Accessories Included ·Slide hammer, ·2 and 3 jaw puller yokes, ·Internal/external puller arms, ·Wheel/axle puller yoke, ·Dent puller hook, ·Dent puller screws (large and small), ·Adapters and hardware, case.
  • Features/Specifications ·Material: steel, heat treatment ·5 lb. chrome plated steel slide hammer ·T-handle for secure grip ·Chrome-plated shaft for smooth operation ·Combination puller with 5-lb malleable steel slide hammer. ·Drop forged steel pullers and attachments fully hardened shaft and accessories. ·Converts into a 2 or 3 jaws internal/external puller for reaching right areas. ·Packed in a sturdy carry case.
Check Stock

MOTLTECH 11\ 280mm Motorcycle Shock Absorber Rear Suspension Adjustable Air Shock Absorber Universal Compatible For Honda Suzuki Yamaha Kawasaki ATV Go Kart Quad Dirt Sport Bikes, 1 pair

  • 【 Fits】2013-2018 Polaris Ranger XP 900 | 2014-2018 Polaris Ranger XP 900 Crew | Replaces OEM Part #: Rear : 1332947, 1333756, 1334175 | NOTE: Not compatible with Anti-Lock Brake Systems (ABS) NOTE: These axles do not fit the 2016 Ranger 900 High Lifter Edition or Ranger 900 Diesel.
  • 【ADR Performance】 Each SuperATV Polaris Ranger Axle is fully assembled using precision components, high quality grease, and heavy-duty steel boots. You can expect similar durability and performance in the ADR Brand Ranger 900 XP Axle as our Rhino Brand..
  • 【Cost Effective Axle】 Looking for a cost effective, quick replacement Polaris Ranger 900 XP Rear Axle? This rear axle is designed to replace any stock UTV axle. Rest assured this ADR Brand Polaris Ranger 900 XP replacement Axle will meet and exceed your OEM axle!.
  • 【Installation】Scan included QR code or visit manufacturer's website to complete installation instructions for your Polaris Axle..
  • 【Expertly Made】 At SuperATV, we des....
Check Stock

munirater Rear Live Axle Kit Brake Assembly Replacement for Drift Trike Go Kart

  • Rear live axle kit replacement for Go Kart.
  • replacement for many 50cc 70cc 90cc atv quads.
  • replacement for Atomik, Motowork, DHZ, LEI..
  • This rear axle kit for trike is made of quality materials, very sturdy and practical, high performance and long service life..
  • This is premium and durable live axle kit for rebuild Go Kart Quad or Trikes..
  • This is a complete rear axle kit and brake kit assembly for go kart, which is perfect for DIY go kart projects or rebuilds..
  • Package includes: rear axle kit, brake assembly, pair of pillow blocks, T8F chain..
Check Stock

TIKSCIENCE Universal Torque Arm Conversion Kit,Fit for Electric Bicycle E-Bike Front or Rear 2 Set

  • ➤[Fitment] : This universal torque arm conversion kit fit for electric bicycle e-bike.This product is suitable for normal motor shafts, except for special shafts (the size of the motor shaft does not exceed 14mm).
  • ➤[Excellent Function] : These versatile torque arms can be installed inside the frame/fork or outside.This torque arm will help prevent the motor from coming loose from the fork (front) or frame (rear) and also prevent the slotted axle from bending or breaking your dropouts..
  • ➤[Durable Material] : The universal torque arm conversion kit is made of high quality antioxidant iron and aluminum. The surface is anodized to completely resist oxidation and corrosion, and to maintain a long-lasting, beautiful luster under light conditions..
  • ➤[You Will Get] : 2 x Steel torque arm.
  • 2 x Stainless steel nut and 5mm Allen bolt.
  • 2 x Slotted electric motor C washer as pictured..
  • ➤[About Service] : The universal torque arm conversion kit designed and manufactured meets stringent delivery standards, with precision inspections before shipment to ensure quality problems.The customer service period is 2 year. If you have any questions about our product, please reply to us by email and we will help you resolve any issues as soon as possible....
Check Stock

Julymoda 600mm 24" Rear Axle Track Assembly Kits for Go Kart ATV Quad Rear Wheel Snow Sand Snowmobile DIY Use Metal Black

  • Material: The rear axle is made of high quality alloy and metal material,which is durable.
  • Type:Rear Axle Track Assemly with track parts and Placement on Vehicle Rear,Left and Right..
  • Rear axle length 600mm/60cm/24inch,with two rear wheels Set..
  • Wide Application : This set fits gasoline motor use,like Beach motorcycle,Snowmobile,Mountain motorcycle DIY etc..
Check Stock