Reviews Rear Axle Differential Case

Crown Automotive-RT20025 RT Off-Road HD Differential Cover - Red

  • Design - Form fitting split channel wrap with arching mount brackets that wrap the differential housing and axle tube in a second covering for additional strength and protection..
  • Added Security - Designed to be an additional barrier between your axle housing and any off-road elements that might try to cause some harm..
  • Protection - Protected in a textured powder coat finish with corrosion and UV protection additives for durability and can be left as is or sanded down and painted to match.
  • Installation - No drilling required to install along the axle but a second set of hands will be found appreciative.
  • Compatibility - Our Rear Differential Skid Plate is compatible with the 2018-2023 Jeep Wrangler JL & 2021-2023 Jeep Wrangler 4Xe. PLEASE NOTE - May not work with aftermarket large differential covers..
Check Stock

Bang II (Feat. Uppercase 5ive)

  • Fully milled gearbox housing made of 6061-T6 aluminum for the rear axle of ATOPRC.
  • Due to its dimensional stability results in a higher load capacity and service life of bevel gear and ball bearings. The problem of the torn fastening thread has an end with this case.
  • The bearing adapters are included in the set.
  • We recommend gluing the bearings with threadlocker y0113. For mounting the bearing adapters in the housing we recommend Bindulin silicone y19015. To use HD differential shafts y1477, the Atoprc bearing adapters must be machined.
Check Stock

REPLACEMENTKITS.COM - Brand Fits Polaris Rear Differential Gear Case Seal Replaces 3610146 -

  • Fits 2009 -2016 Ranger. RZR 800, RZR 800 S & the RZR 800 4.
  • Rear Differential Gear Case/ Axle Seal is an exact cross and replaces the Polaris OEM P/N 3610146, 026HH115, 3610117, 3610159.
Check Stock

DV8 Offroad | D-JP-110001-D30 | Differential Cover fits 2007-18 Wrangler JK with Dana 30 Axle | Increased Oil Capacity | Added Structural Rigidity | Tire Tread Pattern | Grey Powder Coat

  • Design - Form fitting split channel wrap with arching mount brackets that wrap the differential housing and axle tube in a second covering for additional strength and protection..
  • Added Security - Designed to be an additional barrier between your axle housing and any off-road elements that might try to cause some harm..
  • Protection - Protected in a textured powder coat finish with corrosion and UV protection additives for durability and can be left as is or sanded down and painted to match.
  • Installation - No drilling required to install along the axle but a second set of hands will be found appreciative.
  • Compatibility - Our Rear Differential Skid Plate is compatible with the 2018-2023 Jeep Wrangler JL & 2021-2023 Jeep Wrangler 4Xe. PLEASE NOTE - May not work with aftermarket large differential covers..
Check Stock

BTSHUB Silent Bearing Puller Kit Dent Puller Set, Differential Rear Axle Bush Tools Mount Bushing Kit for BMW E36/46, E38/39, E60/61, E31,E90/91

  • DIFFERENTIAL & AXLE BUSH TOOLS: This axle bush tool set is ideal for removing and installing ball joints, bushes and bearings for numerous BMW models from 1 Series to 8 Series..
  • APPICATION: Suitable for vehicles from BMW, 1 Series models, for example, E81, E87.
  • 3 Series E36, E46, E83, E90, E91, E92, E93.
  • 8 Series models E31, E85 Z4 models, E86, and S R53 model.
  • PROFESSIONAL GRADE QUALITY AND DURABILITY:Made of heavy-duty alloy construction, which has high hardness and good toughness. High quality and designed for long life in daily workshop use.
  • FEATURES: Including differential and axle bush tools, this is a comprehensive kit to renew the ball joints and bearings in the rear wheel carrier, longitudinal arms and rear axle, etc. A 8.9" feed rod for actuating the Silent bearing inserts with thread M12 x 0.06" long, at the end of the spindle with thread M12 x 0.06" short.
  • EASY FOR STOREAGE: Comes with a premium well-organized box for easy storage and transport. All thread repai....
Check Stock

6602 Differential Deflecting Bearing Preload Wrench fit for Chrysler/Dodge Vehicles Axle Tube Quick Delivery Equipment Hand Tools

  • Fit for: Works on Chrysler/Dodge vehicles with 7-1/4, 8-1/4, 8-3/4, and 9-1/4 rear axles.
  • This tool is able to loosen the differential bearing adjusters inside the housing through the axle tube ( you need to use with socket).
  • Made of standard No.1045 steel with high strength and toughness for durability and perfect match.
  • It will perfectly fit inside axle tube to access the threaded adjusters with sleek design, and there is about 6″ of heat shrink on the wrench-end which protects the oil seal and wheel bearing from damage when using.
  • Package included: 1pcs Differential Bearing Preload Wrench ( 2 year warranty).
Check Stock

Rancho RockGEAR RS6242 Skid Plate

  • COMPATIBILITY -- Works with OE and most aftermarket differential covers on Jeep Wrangler JK, Dana 44.
  • BUILT FOR THE TRAIL -- Protects differential casting from rocks and other obstacles while off-roading, rock crawling and trail riding.
  • GLIDES OVER OBSTACLES -- Mounts to Dana 44 rear axle casting for a much smoother glide over obstacles both forward and backward.
  • RESISTS CORROSION -- Durable red powder-coat finish resists rust and corrosion.
  • ENGINEERED TO LAST -- Features 0.25-in. high-strength, low-alloy steel construction for long-lasting strength.
Check Stock

Axial RC Truck 1/10 RBX10 Ryft 4WD Rock Bouncer Kit, Gray, AXI03009

  • Solid front and rear axles with realistic metal differential covers.
  • Long travel front and rear oil-filled shocks.
Check Stock

Lubegard 60902 Automatic Transmission Fluid Protectant, 10 oz. , RED

  • Rear Drive Shaft Axle Assembly For 2004-2008 Ford F-150 RWD 4.2L 4.6L 144.7 or 144.5 Wheel base, w/10 Bolt Differential Cover.
  • Shaft Length Compressed (in): 90 3/4" | Shaft Diameter (in): 2-7/8 Inch | Measure the Length to Confirm before Order.
  • This complete drive shaft assembly is pre-balanced and ready to install with 100% new yokes, tubes, constant velocity (CV) joints and universal joints..
  • Ready to install - this drive shaft arrives pre-balanced to make installation quick and simple.
  • 100% new - this drive shaft is made from all new components so there's no core charge or return hassle.
Check Stock

TAMIYA 1/10 4 Wheel Drive Toyota Supra Racing A80 TAM47433A Cars Elec Kit 1/10 On-Road

  • Type 540 Motor included (Compatible with kit-included motor or Item 53689 540J Motor only).
  • Front Suspension: Double Trailing Arm, Rear Suspension: Swing Axle.
Check Stock

A-Premium Rear Complete Drive Shaft Prop Shaft Driveshaft Assembly Compatible with Ford F-150 2004-2008, Lobo 2007-2008, RWD, Replace# 8L3Z4R602E

  • [Vehicle Fitment-1]: Compatible with Ford F-150 2006-2008 V6 4.2L(144.5 Inch Wheelbase), Compatible with F-150 2005 V6 4.2L(144.7 Inch Wheelbase) --- RWD.
  • [Vehicle Fitment-2]: Compatible with Ford F-150 2006-2008 V8 4.6L(144.5 Inch Wheelbase), Compatible with F-150 2004-2005 V8 4.6L(144.7 Inch Wheelbase), Lobo (Mexico) 2007-2008 V8 4.6L(145 Inch Wheelbase)---RWD.
  • [Reference Number]: 936-803, 65-2013, 936803, 652013, 8L3Z4R602E.
  • [Product Description]: ①Length: 92 inch.
  • [Customer Support]: 1 Year Unlimited-mileage Quality Guarantee.
  • Being sturdy and brand-new, this drive shaft is the ideal replacement. Please get in touch with us at any time if the product has any quality issues, such as damage or isn't appropriate for your automobile..
Check Stock

DV8 Offroad Rear Differential Skid Plate for 2021-2022 Ford Bronco | Paintable Aluminum Inserts | Quick & Easy Installation | Multiple Drain Holes | Bolt-on Installation | Black Finish

  • Upgrade - Our system will help to prevent you from getting caught up on rocks. Multiple drain holes are in several locations to release any water or mud that might collect in the skid plate.
  • Strength - Protects all aspects of your Bronco’s Rear Differential like Gasket Seal, & Pinion. In addition to protecting the full length of your Rear Axle & Upper Link Mounts.
  • Install - Utilizing the provided hardware, install is a smooth process and can be completed with 1-2 people. It takes approximately 1 hour to install. The install guide can be downloaded below!.
  • Fitment - This was engineered to work with the original factory diff covers. This may not fit with aftermarket diff covers.
  • Compatibility - DV8's Rear Differential Skid Plate is compatible with 2021 & 2022 Ford Bronco 6th Gen. Our skid plate fits all 2-door & 4-door Broncos.
Check Stock

Rear Differential Fill and Drain Plug Gaskets Crush Washers Seals Rings Fits for Honda Accord Acura Civic Ridgeline Odyssey CRV CR-V Pilot Fit Element, Replaces for the Part# 94109-20000 90471-PX4-000

  • This is the rear differential fill and drain plug gaskets fits for Honda Accord Acura Civic Ridgeline Odyssey CRV CR-V Pilot Fit Elemen.
  • Package including 5pcs replacement of the part# 94109-20000 (aluminum washers for rear differential fill plugs & transfer case fill plugs).
  • Package including 5pcs replacement of the part# 90471-PX4-000 (aluminum washers for rear differential drain plug & transmission case drain plug crush washer seal).
  • Total 10pcs crush washers seals gaskets in the package.
Check Stock