Reviews Ratchet Die Stock

Rope Ratchet 1/8 Ratchet 4 PAK with Spring Clips (2 Pair)…

  • INTERNAL GEARS: Die Cast Zinc Metal Internal Parts - Greater Security. Stainless Steel springs..
  • QUICK AND EASY: Rope Ratchet Light Hangers make it easy to raise and lower objects with quick release lever..
  • WEIGHT CAPACITY: 150 lbs. Combined Holding Weight. 75 pounds per ratchet..
  • ROPE: 6 ft of polyester, solid braid rope for each ratchet. Strong with low stretch..
  • READY TO USE: Rope is fed thru the Rope Ratchet and spring clip is attached to rope..
Check Stock

IBOSAD Copper Tube Fittings Hydraulic Pipe Crimping Tool with 1/2',3/4' and 1' Jaw Copper Pipe Propress Crimper Pressing Pliers

  • Manual ratchet crimper for use with a range of copper terminals, splices, and taps.
  • Ratchet mechanism ensures proper crimp force with each operation.
  • Permanent rotating die is color coded to match color coded connectors.
  • Molded comfort grips reduce user fatigue.
  • Die index embossment allows permanent inspection of installed connectors.
Check Stock

Kuryakyn 7357 Motorcycle Lighting Accent Accessory: Zombie Skull LED Fuel and Battery Gauge for 1988-2019 Harley-Davidson Motorcycles, Chrome

  • Direct replacement for the stock tank mounted (not center console mounted) fuel gauge.
  • use alone or coordinate with other Kuryakyn Zombie themed parts.
  • Features the signature Kuryakyn skull design with a 3" diameter and sinister styling.
  • LED emits easy to read illumination aiding in fuel and battery voltage level monitoring.
  • Durable constructed with quality die cast aluminum with a chrome finish.
  • Includes (1) Zombie fuel and battery gauge and (1) hardware kit.
  • Suggested for installation (not included): needle nose pliers, socket set and ratchet, set of combination wrenches, year and model specific service manual, electrical tape, and a bright flashlight.
  • Compatible with Harley-Davidson models: '94-'19 Road Kings, '00-'17 Softails, '91-'17 Dyna, '15-'19 Freewheeler, and '88-'94 FXR.
Check Stock

Lathe Tailstock Sliding Tap Die Holder MT2 Shank - Tapping Threading Reaming Drilling - 2MT

  • Lathe Tailstock Sliding Tap Die Holder MT2 Shank - Tapping Threading Reaming Drilling - 2MT.
  • ​​​A Tail Stock Tap Die Holder Should Be Among The First Accessories a Machinist Makes For His Lathe, Since Threading With A Hand Held Die Stock....
  • 3 Die Holders Are Interchangeable & Can Hold Die Sizes of 13/16" + 1" + 1-1/2"..
  • 3 Tap Holders Are Interchangeable & Can Hold Taps 0" to 1/4" + 1/4" to 1/2" + 1/2" to 3/4".
  • EXCLUSIVE - TAP AND DIE HOLDER SET - OTHER SIZE MT1 AND MT3 IN OUR SHOP !.
Check Stock

Williams B-52A 3/8-Inch Drive Round Head Ratchet

  • Adjustable Die Handle Round Die Stock Wrench Holder with adjustable screws. Suitable for making or repairing male and female threads. Good for general purpose applications..
  • Special Design: High-speed steel machine tap is with high hardness and toughness for wear resistance. Features just the base substrate without any additional coatings. With adjustable screws, the die stock can securely hold round dies..
  • Easy to Use: The positioning groove of the die should be aligned with the fastening screw in the middle of the die wrench, and the screw should be inserted into the slot of the die and tightened..
  • Tips: It needs to be reversed every 1/4~1/2 turn to facilitate the chip discharge from the chip hole. Suitable lubricating oil should be added to the cutting edge of the die when tapping threads..
  • Measure the size manually. If the product you receive does not meet your needs, please contact us and we will do our best for you..
Check Stock

Mapex S600EB Mars Double Braced Snare Stand - Black

  • The Offset Multi-Step tilter enables players to fine their ideal snare drum angle while the die-cast basket adjuster will last for years without stripping or cracking..
  • Mars Double Braced Ratchet Adjuster Snare Stand - Chrome.
Check Stock

GEARWRENCH 42 Piece Ratcheting Tap & Die Set Metric - 3886

  • Die adapter works on round and hex shaped Dies.
  • Ratcheting T-handles wind Dies with a 5° swing arc and have a reversing lever to eliminate hand-over-hand turning.
  • Twist lock guide system reduces the “walk back” of the die guide and keeps the dies centered while cutting.
  • Die adapters work with the 3/8 Drive pass-thru ratchet and socket system as well as socket Accessories".
  • Auto-locking feature allow the tap adapters to be removed safely.
Check Stock

RIDGID 38540 Manual Pipe Threader for Models 00-RB and 00-R Manual Ratcheting Tap Handle for Threading Dies Ratchet and Handle Only Small

  • Easy to access ratchet knob on head of the ratcheting tap indicates forward and reverse.
  • Die heads snap in from both sides and lock in place for faster size changes.
  • Includes manually operated ratchet and handle only.
  • 3-Foot threading ratchet handle provides leverage.
  • RIDGID 38540 is for model 00-R and 00-RB manual pipe threading.
Check Stock

Rope Ratchet HH20 Hand Chain Hoists, Black

  • THE BEST: The easy-to-use ROPE RATCHET is the answer to all your tie-down needs for work or play. Whether you need to hoist a bike, garage hoist, or a deer hoist for hunting we have you covered..
  • BUILT TOUGH: The patented design and rugged construction lets you secure a wide variety of loads quickly and easily. Every ROPE RATCHET is made super tough so you can depend on it to work as a chain hoist, block and tackle, pulley system, or as a double pulley. Every ROPE RATCHET is made super tough so you can depend on it to take all the hard work you do. The outer casings are made from strong #6 - 33% Glass Filled Nylon with interior mechanisms of Die Cast Z. 250lb Weight Capacity.
  • GET IT DONE: With the ROPE RATCHET you simply attach the two hooks and pull the loose end of the rope to get the secure tightness you need. Feel comfortable using it for a high lift, hand ratchet, or over the door pulley. With ROPE RATCHET Tie-Downs you never have to worry about stretching, snapping back or loosening..
  • SAFE & SECURE: Your load stays secure because the rope automatically locks in place with every pull and stays locked until you release it by pushing the convenient Thumb Release Lever..
  • TRUSTED: Carolina North Manufacturing warrants its products to be free of defects ....
Check Stock

GEARWRENCH 77 Piece SAE/Metric Ratcheting Tap and Die Set -3887

  • Gearwrench Die adapter works on round and hex shaped dies.
  • Gearwrench Ratcheting T-handles wind dies with a 5° swing arc and have a reversing lever to eliminate hand-over-hand turning.
  • Twist lock guide system reduces the “walk back” of the die guide and keeps the dies centered while cutting.
  • Die adapters work with the 3/8inch Drive pass-thru ratchet and socket system as well as socket accessories.
  • Auto-locking feature allow the tap adapters to be removed safely.
Check Stock

Greenlee 7304 Knockout Punch Driver Kit

  • Set contains 4 punch and die sets, and high impact plastic case.
  • Use with battery-powered, hydraulic, ratchet or manual drivers.
  • Properly assembled through pilot holes, they will make clean, fast and accurate holes.
Check Stock

DP Dynamic Power 3/8'' Heavy Duty PRO Air Ratchet Wrench Professional Choice 55 ft-lbs

  • 【3/8-Inch Air Ratchet Wrench】WORKPRO 3/8” air ratchet wrench can deliver up to 50ft.lb (68n.m) of torque at free speed of 160RPM. Powered by air, this ratchet wrench can tighten or loosen nuts and bolts quickly and efficiently, suitable for general engine repair, household projects and light industrial applications..
  • 【F/R Knob】Adjusting the F/R knob on the back of the square drive can change the direction of the air ratchet wrench. Forward to tight the bolts and reverse to unscrew the bolts. Operating pressure: 90psi (6.3bar). Air consumption:4.7cfm(133.3l/min). Note: Using the sealant tape to avoid air leakage..
  • 【360 Degree Adjustable Exhaust】 The exhaust of this item can be adjustable 360 degrees, allowing you to point it away from the work area and yourself. The air inlet filter could keep the die grinder from contamination. Note: Add oil regularly is needed for all air tools (lubricant included)..
  • 【Ergonomically design】 This air ratchet operates smoothly and has a comfortable ergonomic grip. It measures 11 inches long and weighs 2.7 lb, small and nimble enough to access tight and hard-to-reach places easily, designed with soft rubber-coated grip and brings the experience of non-slip grip..
  • 【Wide Applications】An air ratchet makes....
Check Stock

GEARWRENCH Angled Tip Pry Bar, 31\ - 82431

  • Product 1: Ratcheting T handles wind Dies with a 5° swing arc and have a reversing lever to eliminate hand over hand turning.
  • Product 1: Twist lock guide system reduces the “walk back” of the die guide and keeps the dies centered while cutting.
  • Product 1: Die adapters work on round and hex shaped Dies.
  • Product 1: Die adapters work with the 3/8inch Drive pass thru ratchet and socket system as well as socket Accessories.
  • Product 2: Expandable and adjustable to reach areas inaccessible to a fixed head tool for improved access.
  • Product 2: Head rotates 180° through 14 locking positions for unparalleled access and leverage.
  • Product 2: Compact design allows for work in tight spaces.
  • Product 2: Designed for demolition, repositioning equipment, industrial work, aligning steel components, or moving engines.
Check Stock