Reviews Raspberry Pi Zero Wifi Repeater- BestItemr.com

MakerSpot 5-Port Stackable USB Docking Hub for Raspberry Pi Zero V1.3 (with Camera Connector) and Pi Zero W/2W (with Bluetooth & WiFi)

5 x USB 2.0 data and charging ports, a micro USB port for power input up to 2.3A consumption .
5 x electrolytic capacitors to filter electrical noise and stabilize voltage with an independent protection circuit to limit total current to 2.3A .
an RJ45 Ethernet port with Realtek RTL8152B 10/100M chip, A 3.5mm audio jack, supporting both recording and playback .
Compatible with Raspberry Pi Zero v1.3 (with Camera Connector) and Raspberry Pi Zero W / Pi Zero 2 W (with Bluetooth and WiFi) .
Raspberry Pi Zero shown in the photos is for illustrative purpose only, not included in this offer.

Check Stock

CanaKit Raspberry Pi Zero W (Wireless) Complete Starter MAX Kit with Premium Black Case (64GB Edition)

Raspberry Pi Zero W (Wireless) Board with on-board WiFi and Bluetooth.
CanaKit Premium Black High-Gloss Raspberry Pi Zero Case.
Includes Samsung 64 GB MicroSD Card (Class 10) - Pre-loaded with NOOBS.
CanaKit 2.5A Micro USB Power Supply with Noise Filter (UL Listed) specially designed for the Raspberry Pi (5-foot cable).
USB OTG Cable, Mini HDMI Adapter, GPIO Header.

Check Stock

Zopsc Digital Trunk Board with Expansion Board for Raspberry Pi GS68 MMDVM DMR Repeater, Support for Upgrades via for ST-Link, USB, GPIO.

With USB interface, can connect for Raspberry Pi and PC, built-in PL2303 model..
Support MMDVM mode for DMR / YSF / P25 / NXDN / DSTAR / POCSAG..
The Repeater and Simplex modes can be changed at any time by changing the RX / TX board sequence..
Support for Raspberry Pi 3B/ 3B/ Pi ZERO, compatible with for NanoPi NEO, for Orange Pi, compatible with for BlueDV (requires USB to TTL or Bluetooth model)..
Support for VHF / UFH, frequency range, depending on your external radio..

Check Stock

Jstvro Duplex MMDVM Hotspot Board Radio Station WiFi Digital Voice Modem P25 DMR Hotspot Support YSF Raspberry Pi OLED Antenna (Duplex-Board-OLED-Antenna)

Suit for Raspberry Pi 3,Raspberry Pi Zero W. Support:D-STAR, P25, DMR and work with UHF. In Single mode support both Uhf and Vhf.
Basic Setup: Set the same freq as Radio Mobile, for example: 433.550000MHZ DMR, WIFI SSID:pi-star,PASSWORD:raspberry, Need the 2.4GHz SSID as the Pi Zero W doesn't support 5.8GHz.
Best customer service: feel free to contact us,we will reply soon within 8 hours..

Check Stock

Geekworm KVM-A4 Kit Compatible with PiKVM HDMI CSI for Raspberry Pi Zero 2W/Zero W Only(Not Include Raspberry Pi)

【What is it】This kit allows user to realize a PiKVM / KVM project with Raspberry Pi Zero 2W/Zero W which can control a computer using a web browser!.
【Compatiblity】for use with Raspberry Pi Zero 2W or Raspberry Pi Zero W only, NOT support Raspberry Pi Zero..
【Function】Remotely turn on/ turn off / restart your computer.
reinstall the OS using the Virtual CD-ROM or Flash Drive.
Simulate a keyboard, mouse, and a monitor and presented in a web browser, etc..
【How to Power】Power Input: 5.1Vdc +/-5% , ≥3A.
Power Via USB Type-C port of X630-A4. (DON'T power via Raspberry Pi's micro USB port, because it is occupied as USB OTG.) Recommend to use Geekworm UL listed 20W 5V 4A USB Type-C power adapter (ASIN:B09J856PND)..
【Cooling Solution】Come with C296 aluminum alloy heatsink for heat dissipation of Raspberry Pi Zero 2 W. C296 also compatible with Raspberry Pi Zero W by using thermal pads of different thicknesses..
【What Included】1 x X630-A4 V1.1 Expansion Board with Accessories, 1 x X630-A5 V1.0 Adapter Board with Accessories, 1 x X630 HDMI to CSI-2 Module with Accessories, 1 x Ethernet Cable(1m length), 1 x0.96 inch OLED Module.
【Extra Needed】Raspberry Pi Zero 2W/Ze....

Check Stock

MakerSpot 4-Port Stackable USB Hub HAT for Raspberry Pi Zero W V1.3 Pi Zero Board NOT Included with Protector 2.4A Power Supply 1.5m Cable WiFi Dongle 16GB MicroSD Card HDMI Adapter

9-in-1 Essential Accessories Kit for Raspberry Pi Zero, RASPBERRY PI ZERO IS NOT INCLUDED.
A Form Fitting 4-Port Stackable USB Hub HAT for Raspberry Pi Zero v1.3 (with Camera Connector).
Transparent Acrylic Case together with nylon bolts, imprinted with GPIO pins guides you the correct connection..
150Mbps Wireless N WiFi USB Nano Adapter, Mini HDMI Connector, 3x20 Pin Header Set, All Gold Plated..
16GB Micro SD Card and preloaded with the latest version of NOOBS installer..

Check Stock

Geekworm Raspberry Pi Hdmi in Module, Hdmi to CSI-2 C790, Hdmi Input TC358743 Supports up to 1080p60fps Video & Audio Supported Compatible with Raspberry Pi 4B/3B+/3B/Pi Zero/W/2W/CM4

【Overview】This C790 Hdmi to CSI module takes the incoming HDMI signal and converts it into a separate CSI signal&I2S audio signal. ( Raspberry Pi 4 and Pi ZeRo only support 2 lan, max 1080P@50fps, and CM4 can support 4 lan, max 1080P@60fps).
【Compatibility】Compatible with Raspberry Pi 4 Model B, Raspberry Pi 3 Model B+/3B, Raspberry Pi 3 Model A+, Raspberry Pi 2 Model B,Raspberry Pi 1 Model B+, Raspberry Pi Zero/Zero W/Zero 2W, Raspberry Pi CM4/CM3 with IO board..
HDMI Input: supports up to 1080P60Hz on Raspberry Pi.
【Packing List】: ✔1 x HDMI to CSI-2 Module C790 ✔1 x FPC 15pin 1.0mm cable（15cm length） ✔1 x FPC 22pin 0.5mm cable（15cm length） ✔1 x I2S cable (15cm length).
【User manual】Refer to our WiKi search C790..

Check Stock

Geekworm Raspberry Pi Hdmi-in Module, Hdmi to CSI-2 C779, Hdmi inpute TC358743 Supports up to 1080p25fps Compatible with Raspberry Pi 4B/3B+/3B/Pi Zero/W/2W

【User manual】Refer to our WiKi search(HDMI_TO_CSI-2).
【Overview】This is a Raspberry Pi Hdmi to CSI-2 Module with Toshiba TC358743XBG chip, Hdmi-input supports up to 1080p25fps..
【Compatibility】Compatible with Raspberry Pi 4 Model B, Raspberry Pi 3 Model B+/3B, Raspberry Pi 3 Model A+, Raspberry Pi 2 Model B,Raspberry Pi 1 Model B+, Raspberry Pi Zero, Raspberry Pi Zero W, Raspberry Pi Zero 2W...
【Packing List】 ✔1 xHdmi-to-CSI-2 C779 ✔2 x FFC Cable(15cm/5.91inch length).

Check Stock

Aoicrie for Raspberry pi Zero Camera Module 5MP 1080p OV5647 Sensor Video Compatible with Pi Zero Ribbon Cable&FPC Cable for Raspberry Pi Model A/B/B+,Pi 2 for Raspberry Pi 3,3B+ Pi Zero/Zero W Pi 4

for Raspberry Pi Zero CSI Camera Module with Fixed Focus Lens Camera module for Raspberry Pi, Fully compatible for Raspberry Pi A, B, B+, 2, 3, 3B+.Pi 4.Zero Zero W and 720p The camera is supported in the latest version of Raspbian,the for Raspberry Pi's preferred operating system.Work natively with all for Raspberry Pi models for your new project or drop-in replacement..
High-Definition video camera, The sensor itself has a native resolution of 5 megapixel. In terms of still images, the camera is capable of 2592 x 1944 pixel static images, and also supports 1080p @ 30fps, 720p @ 60fps and 640x480p 60/90 HD video recording.Easy plug and play type capability，Can be applied to image recognition and image tracking..
Both cables 2 cables included between the camera connectors for the Pi Zero and Model A&B series,The module attaches to for Raspberry Pi, by way of a 15 Pin Ribbon Cable, to the dedicated 15-pin MIPI Camera Serial Interface (CSI), which was designed especially for interfacing to cameras.15CM Golden Ribben Flex Cable for Raspberry Pi Zero Zerow, model: FPC.
5.90in/15cm and 19.68in/50cm white camera cable for Raspberry Pi Model A/B/B+, Pi 2 and for Raspberry Pi 4 3, 3B+, model: FFC.The C.
Connect the included ribbon cable to the CSI (Camer....

Check Stock

kuman RPi GPIO Breakout Expansion Board + Ribbon Cable + Assembled T Type GPIO Adapter 20cm FC40 40pin Flat Ribbon Cable for Raspberry Pi 3 2 Model B & B+ SC05

Assembled RPI GPIO with 8" 40 pin ribbon cable for Raspberry Pi 3B, Raspberry Pi 2 model B, Raspberry Pi 1B+, Raspberry Pi 1a+, Raspberry Pi zero w, Raspberry Pi zero.
40 pins are labeled for easy prototyping.
Gpio adapter plus for Raspberry Pi B+, Raspberry Pi 2, Raspberry Pi is not included.

Check Stock

Geekworm Raspberry Pi Zero 2 W 18650 UPS Expansion Board X306 & USB HUB for Raspberry Pi Zero 2W/Zero W(Not Include Raspberry Pi)

【Compatibility】Compatible with Raspberry Pi Zero 2 W & Pi Zero W, NOT support Raspberry Pi Zero..
【One-Cell 18650 UPS HAT】Ideal Uninterruptible Power Supply (UPS) solution for Raspberry Pi Zero W/2W, Max 5.1V 4000mA Power Backup with 18650 single cell battery holder.
【3-Port USB HUB】On-board three USB 2.0 Ports.
Gain 3 USB2.0, downstream ports which offer High-Speed (480Mbps), Full-Speed (12Mbps), and Low-Speed (1.5Mbps).
【How to Power】Power via USB Type-C 5V Power In port of X306.
(Recommend to use Geekworm UL listed 20W 5V 4A USB Type-C power adapter (ASIN:B09J856PND) ).
【Cooling Solution】Recommend to use with C296 aluminum heatsink(ASIN: B09QMBCXLB) for Raspberry Pi Zero 2 W. C296 also compatible with Raspberry Pi Zero W by using thermal pads of different thicknesses..
【Packing List】1 x X306 V1.1 Expansion Board.
Note: not inlcude Raspberry Pi board,18650 battery, GPIO Header & power adapter..
【User Manual】Installation guide and user manual refer to Geekworm WiKi search X306..

Check Stock

Vilros Raspberry Pi Zero- Zero W Compatible Case (Black)

Features 3 Covers, Sealed Open GPIO and Camera Module Compatible.
Includes a 40mm Raspberry Pi Zero / Pi Zero W Compatible Camera Cable and 2×20-pin Strip Dual Male Header.
Case ONLY Does NOT include Raspberry Pi Board Or Cables.

Check Stock

Duplex MMDVM Hotspot Radio Station P25 DMR Hotspot Antenna WiFi Digital Voice Modem Support YSF Raspberry Pi Zero

Suit for Raspberry Pi Zero W. Support:DMR,D-STAR, P25 and work with UHF in duplex mode. In Simplex mode support both Uhf and Vhf.
Basic Setup: Set the same freq as Radio Mobile, for example: 433.550000MHZ DMR, WIFI SSID:pi-star,PASSWORD:raspberry, Need the 2.4GHz SSID as the Pi Zero W doesn't support 5.8GHz.
Power Supply: Mobile charger or a USB cable connected to your computer or laptop. The Hotspot will also work mobile in your vehicle if you Tether it to your mobile phone network..
Support receive in one Frequency and tranfer in another Frequency..
Best customer service: feel free to contact us,we will reply soon within 24 hours..

Check Stock