Reviews Raspberry Pi Plate

Treedix 3pcs GPIO Reference Board Pinout Plus for Raspberry Pi A+, B+, 2, 3, 4

  • This reference board is a very convenient tool to determine the position and function of each pin, which can make it very easy to connect the wire to the Raspberry Pi GPIO.
  • One side of the reference board shows the position, and the other side shows the GPIO number. You can view all the different pin labels of the 2×20 GPIO connector on the Raspberry Pi. By placing it on the connector or next to it, you can quickly check if any wires or components are properly connected.
  • Material: Raspberry Pi GPIO Plus reference pinout is made of glass fiber, and the holes of the reference plate are gold-plated Length: 60.2 /2.37in, width: 20.1mm/0.79in 100% high quality..
  • Use this reference guide to easily connect wires and components to your Raspberry Pi.
  • Compatible with Raspberry Pi models A+, B+, 2, 3 and 4.
Check Stock

Semi-Enclosed Enclosure Kit for Raspberry Pi BeagleBone Arduino UNO Mega

  • This is a multi-purpose semi-enclosed enclosure kit, Supports Raspberry Pi 1 Model A+ / Pi 1 Model B+ / Pi 2 Model B / Pi 3 Model B / Pi 3 Model B+ /....
  • It can be assembled very flexibly as a semi-closed enclosure, or as a two-layer bracket, or if you buy multiple sets, it can be used as a Raspberry Pi....
  • The space between the lower cover and the upper cover is 40mm, support Raspberry Pi direct stack HAT module, or Arduino stack SHIELD module, or....
  • The material of the lower cover and upper cover is 1.5mm thick aluminum plate, which is very strong, spacer/standoff and screws are nylon material..
  • Packing list: 2x covers, 8x M4x40mm standoffs, 4x M4x10mm spacers, 4x M4x8mm screws, 16x M2.5x6mm screws, 8x M2.5x10mm spacers (for Arduino MKR module....
Check Stock

UCTRONICS Desktop Cluster Enclosure for Raspberry Pi, Up to 4 Raspberry PIS and 2.5" SSD, Front Removable Trays, 12cm LED Cooling Fan for Raspberry Pi 4B/3B+/3B

  • Not only compatible with Raspberry Pi 4B and 3B, all Raspberry Pi B-type boards are compatible..
  • Hassle-free installation of 2.5" ssd, add your additional storage anytime, anywhere. Please note that the thickness of a 2.5" SSD cannot exceed 7mm..
  • With a 12cm LED fan, silent, beautiful, and able to provide sufficient cooling for 4 Raspberry Pi. Note: This fan is not a PWM fan, can not control the air speed and temperature..
  • Front pull-out, easy to replace one of the Raspberry Pi, easy access to the Raspberry Pi's I/O ports and SD card..
  • The mounting plate also has a reserved SD card slot, so you can access and replace the SD card from the front side simply by using the SD card adapter(ASIN: B09CKRDFTH)..
Check Stock

UCTRONICS SSD Baseplate for Raspberry Pi Cluster, Supports 2 Units of 2.5” Solid State Drives

  • This bracket is specifically designed for Raspberry Pi cluster ASIN B096MKY263, so as to get a bigger Network attached storage for Raspberry Pi, compatible with 2.5” SSD (7mm/9mm)..
  • Easy to Setup: Just insert your SSDs, fix them with the screws, and assemble it with the RPi baseplate, then mount them to the cluster..
  • Quality Built: Made of aluminum alloy, matte black powder coat finish, have nothing breaking off, paint chips, sharp exposed edges (plate corners are rounded off smooth)..
  • Applications: This is a solution to expand the storage of your Pi with 2 2.5" SSDs, perfect for game or media servers, security monitoring, or other projects expanding the functions of Raspberry Pi..
  • NOTE: Please search for ASIN B096MKY263 to get the RPi cluster rack, and ASIN B094D12ZXF to get the SATA adapter as you need..
Check Stock

UCTRONICS 19 inch 3U Rack Mount for Raspberry Pi 4, with 8 Mounting Plates, Extendable to Support 12 Units of All Raspberry Pi B/B+ Models

  • This 19 inch rackmount is specifically designed to house 1-8 Units of Raspberry Pi 4 B, can be extended to support 12 units of 4B, 3B+, and other B models, much more than 1U rack. NOTE: It only comes with 8pcs mounting plates, if needed, please order others separately..
  • Standard 3U Size: 19"×5.25"(482.6×133.35mm), fully compatible with 19” server racks, had no issue plugging this into the 3U rack space..
  • Easy to Install: 4 slots on every mounting plate for raspberry pi 4B boards, and 2 mounting holes to the rack on the side, fixed with included screw.
  • the rack can be vertical fixed on the mounting rail (the rack mount screw is not included)..
  • Quality Built: Every piece is made of nice and sturdy gauge of 1.2mm carbon steel, matte black powder coat finish, have nothing breaking off, paint chips, sharp exposed edges (plate corners are rounded off smooth)..
  • Package Includes: 1 piece 19" 3U rackmount for Raspberry Pi.
  • 48 screws. NOTE: The blank cover, Micro HDMI adapter, and Pi 4 board are not included.
  • If needed, please search for ASIN B08N66BCXR, B08KXZHD9P, and B08N665CHL to order the blank cover, Micro HDMI adapter and mounting plates separately..
Check Stock

Seeed Studio ReSpeaker 4-Mic Array for Raspberry Pi, Raspberry Pi Microphone

  • ReSpeaker 4-Mic Array for Raspberry Pi（Pi 3/Pi 4 B +) is a 4 microphone expansion board for Raspberry Pi designed for AI and voice applications. This means that you can build a more powerful and flexible voice product that integrates Amazon Alexa Voice Service, Google Assistant, and so on..
  • Different from ReSpeaker 2-Mics Pi HAT, this board is developed based on AC108, a highly integrated quad-channel ADC with I2S/TDM output transition for high definition voice capture..
  • Besides, this 4-Mics version provides a super cool LED ring, which contains 12 APA102 programmable LEDs.With that 4 microphones and the LED ring, Raspberry Pi would have ability to do VAD(Voice Activity Detection), estimate DOA(Direction of Arrival) and show the direction via LED ring, just like Amazon Echo or Google Home..
  • This Raspberry Pi microphone support all Raspberry Pi models, including Raspberry Pi Zero, Raspberry Pi 1 B+, Pi 2 B, Pi 3 B, Pi 3 B+，Pi 4 B..
  • ReSpeaker 4-Mic array does not have audio output. If this is a requirement please consider the ReSpeaker 6-Mic Circular Array Kit For Raspberry Pi, the ReSpeaker 4-Mic Linear Array Kit for Raspberry Pi , or the ReSpeaker Mic Array v2.0..
Check Stock

Smraza Raspberry Pi 3 B+ Case with Fan, 5V 2.5A Power Supply and 3 Heat Sinks for Raspberry Pi 3 Model B+ (B Plus), 3B, 2B

  • ✓ The Latest Version 9 Layers case for Raspberry Pi 3 model B+ / Raspberry pi 3 /pi 3 model b / pi 2 / pi 2 b (Not include Pi Board).
  • ✓ Raspberry Pi Case has the layout design for the Raspberry pi 3 model b+ and will perfectly protect your pi components.
  • ✓ Easy to access all GPIO ports - Raspberry pi case with cutout to allow Pi's GPIO, HDMI, USB, SD, Power Supply and Other GPIO Ports access.
  • ✓ Made of Acrylic, the raspberry pi 3b case Won’t Block your raspberry pi's Wifi / Bluetooth Signal.
  • ✓5V 2.5A power supply with 59 Inch power cable is durable, on/off switch would cause less wear and tear on your raspberry pi's power port. Package Include: Raspberry Pi 3 B+ Case, Fan, 3 Pcs Heatsinks, 2.5A Power Supply.
Check Stock

Miuzei Raspberry Pi 4 Case with Fan Cooling Pi 4 Case with 4 Pcs Aluminum Heat Sinks Pi 4B Case for Raspberry Pi 4 Model B -Black/Blue (Pi 4 Board Not Included)

  • Raspberry Pi 4 Case for Raspberry Pi 4 - Miuzei clear blue acrylic raspberry pi 4b case is specially designed for raspberry pi 4 modle b / 4 b, and perfect compatible with raspberry pi 4 /4b. assembly easy for beginners and amateur..
  • Raspberry Pi 4 Case With Fan - New Raspberry pi 4b case with a Silence DC 5V cooling fan and 4 pcs Aluminum heatsinks, cooling system keep your Raspberry pi 4 B cool quickly even the CPU under high load..
  • Raspberry Pi 4 Model B Case - acrylic pi 4 case won’t block the signal.the rubber feet on the bottom lid can provide a stable platform for raspberry pi 4 case so that it allows air to circulate on the bottom side of the board and avoid the screws scratching the desk surface..
  • Easy To Access All Ports - Miuzei raspberry pi 4 case fan can perfect Access to the USB-C Power Connector, Dual Micro HDMI, Audio/Video, USB and Ethernet Ports, GPIO Port, Camera Cable, and Access to the Micro SD Card..
  • Packaging Content & After -Sales - you will receive pi 4 clear blue case, 4 piecess raspberry pi heatsink, 35mm cool fan, 4 piecess rubber feet, screwdrive, awesome looking, it can make your pi looks cooler than others. if you encounter any problems, you can contact us at any time, and we will answer you..
Check Stock

Geekworm Raspberry Pi 4 Case, Raspberry Pi 4 Heatsink Aluminum Alloy Passive Cooling Case (P330)

  • 【Passive Cooling Aluminum Alloy Case】Geekworm Raspberry Pi 4 Case - P330 is designed for Raspberry Pi 4 Model B computer only, support Raspberry Pi 4B 1GB/2GB/4GB/8GB version.
  • Cool your Raspberry Pi 4 without fans and noise..
  • 【Add Copper Heatsink for Better Cooling】Equipped with a CPU copper heatsink(to replace the thermal pad) to attach with CPU grease on CPU of Pi4 for better heat dissaption (Not include CPU grease).
  • 【High Quality Aluminum Material】Sturdy and durable, keep your Raspberry Pi 4 free from scratches, dust and damage..
  • 【Easy Access to Raspberry Pi 4 Ports】Easy installation. Easy access to all Raspberry Pi 4 ports, such as GPIO, Micro HDMI, TF Card, USB-C Power Supply ".
  • 【Packing List】1 x Raspberry Pi 4 Aluminum Alloy Case, 1 x Copper Heatsink, 1 x Screws Pack 【Note】NOT include raspberry pi board.
Check Stock

SainSmart IMX219 Camera Module for NVIDIA Jetson Nano Board & Raspberry PI CM3 8MP Sensor 160 Degree FoV,RoHS Certified

  • The 160-degree wide-angle lens can capture a large area of the scene within a short shooting distance and is suitable for photographing large scenes....
  • This camera module is designed for NVIDIA Jetson Nano Board and Raspberry PI CM3..
  • The camera is capable of 3280 x 2464 pixel static images, and also supports 1080p @ 30fps, 720p @ 60 fps and 640 x 480 p 60/90 video recording..
  • It is widely used for AI intelligent recognition, face recognition, road identification line recognition, license plate recognition, etc..
  • Note: For Raspberry PI, this camera module only compatible with Raspberry PI CM3, other version is not supported. If you have any other questions....
Check Stock

kuman RPi GPIO Breakout Expansion Board + Ribbon Cable + Assembled T Type GPIO Adapter 20cm FC40 40pin Flat Ribbon Cable for Raspberry Pi 3 2 Model B & B+ SC05

  • Assembled RPI GPIO with 8" 40 pin ribbon cable for Raspberry Pi 3B, Raspberry Pi 2 model B, Raspberry Pi 1B+, Raspberry Pi 1a+, Raspberry Pi zero w, Raspberry Pi zero.
  • 40 pins are labeled for easy prototyping.
  • Gpio adapter plus for Raspberry Pi B+, Raspberry Pi 2, Raspberry Pi is not included.
Check Stock

LoveRPi Power-Over-Ethernet (PoE) HAT Kit for Raspberry Pi 3 Model B+ with Black Case

  • ULTIMATE POWER OVER ETHERNET HAT FOR RASPBERRY PI 3 B+: Deliver clean and reliable power to the latest Pi 3 Model B+ by removing the problematic MicroUSB plug altogether! Power-over-Ethernet is both simple, power efficient, and cost effective compared to having multiple power adapters..
  • BUILT FOR CLUSTER NODES: Simplify cable management and expand your on-premise cloud with POE! Power five, ten, twenty Raspberry Pi 3 Model B+ boards through a single POE switch. This PoE HAT was designed to exceed the power delivery standards set by the official Raspberry Pi PoE HAT and other products available on the market..
  • POWER OVER ETHERNET SWITCH REQUIRED: Network switch must be compliant with IEEE 802.3af PoE standard. PoE power output must be within the budget of the switch when powering multiple boards. PoE switch and Raspberry Pi 3 Model B+ sold separately..
  • ANODIZED HEATSINK AND VENTILATED CASE WITH COOLING FAN INCLUDED: Raspberry Pi 3 Model B+ gets very hot and active cooling is the only way to prevent temperatures from exceeding 150°F! This kit includes everything you need to keep your PoE powered board operating at maximum performance. Raspberry Pi 3 Model B+ sold separately!.
  • NOT COMPATIBLE WITH RASPBERRY PI 4 OR RASPBERRY PI 3 MODEL B AND OLDER MODE....
Check Stock

SunFounder Raspberry Pi Car DIY Robot Kit for Adults Picar-s,Visual Programming with Ultrasonic Sensor Light Following Module Line Following Module

  • STEM ROBOTICS KIT - A complete rpi robot kit based on Raspberry Pi. It’s funny to assemble it.( (Compatible with RPi 4B/3B/3B+/2B/2B+, Raspberry Pi....
  • EASILY CODING - Python code: Great for web development.
  • Dragit: base on Snap!, fun and simple GUI programming..
  • VARIOUS SENSORS - The raspberry pi car comes with three sensor modules including ultrasonic obstacle avoidance, light follower, and line follower..
  • SOLID PLATES - Upgrade durable and shatterproof plate. And new style Servo,the MAX torque of the clutch gear digital servo is up to 1.6KG. It rotates....
  • EASY OPERATION - Elaborately-written user manual and published video for you to easy build your own sensor car robot..
Check Stock