Reviews Raspberry Pi Case Cluster

GeeekPi 6-Layers Raspberry Pi Cluster Case,Raspberry Pi Rack Case with Raspberry Pi Heatsinks Stackable Case Stack Enclosure for Raspberry Pi 4/3/2 Model B,Raspberry Pi 3 Model B+ (Clear)

  • Compatible with Raspberry Pi 4 Model B & Raspberry Pi 3 B+ & Raspberry Pi 3/2 Model B.
  • Access to all ports and slots of Raspberry Pi, including SD card slot, GPIO port, USB ports, HDMI port and so on..
  • The case includes heatsinks for cooling down your Raspberry Pi better..
  • The stackable case can provide you with an environment to put six pieces of Raspberry Pi board together..
  • Package Includes:1 x 1 Pack of 6-Layer Acrylic Cluster framework For Raspberry Pi,6 x Aluminum Heat Sink pack (For RPi 4B),6 x Aluminum and Copper Heat Sink Pack (For RPi 3B+),1 x Screw driver.
Check Stock

UCTRONICS Raspberry Pi Cluster Case, Desktop Metal Rack Case, 4 Layers with 2 Cooling Fans Compatible with Raspberry Pi 4B and 2.5\ SSD

  • For All Raspberry Pi B Models: The metal enclosure is designed for Raspberry Pi and is compatible with Raspberry Pi 4B+/3B/3B+/2B/B+.
  • Supporting up to 4 2.5" SSDs (7mm thickness) and 4 Pi installations.
  • it allows you to add additional storage to your Raspberry Pi whenever and wherever you want, making it easy to build Raspberry Pi clusters and Raspberry Pi NAS servers. Please note that the thickness of a 2.5" SSD cannot exceed 7mm..
  • Side Opening Design: you can easily position the Raspberry Pi HDMI, audio, and power supply. Each layer is 40mm/4.57inch high, there is enough space for you to install 4 mini PoE hats and raspberry pi PoE+hat..
  • Made of metal aluminum, Size: 4.13*4.84*7.12inch.
  • the case is strong and durable, compact and lightweight. So you can easily place it anywhere on your desk. An SD card slot is reserved in the mounting bracket, which can be accessed from the front of the case using an SD card adapter (Asin: B09CKRDFTH). 4 additional screw holes on the top of the enclosure for stacking..
  • Easy to install: The case is not pre-assembled and requires simple installation once you get it in your hands. Each mounting plate uses M4 hand screws, making it easy to remove and install one of the units without a screwdriver..
Check Stock

UCTRONICS Fan Adapter Board for Raspberry Pi Upgraded Complete Enclosure and Raspberry Pi Cluster Case, Compatible with Raspberry Pi 3/3B+/4B, Output 5V Power

  • This fan adapter board is designed for Raspberry Pi desktop cluster cases and supports any Raspberry Pi motherboard with micro USB or USB C power..
  • With 4 pins on the adapter board, it can provide 5v power to two fans, which is the best way to power your fans when your Raspberry Pi GPIO is occupied by the PoE hat and keep your device cool at all times..
  • Plug and play: The fan adapter fits any 5V fans with an XH2.54 duplex connector. Simply plug the red wire of the fan connector into the positive and the black wire into the negative to run. Size:0.51*0.59 inch..
  • Compatible ASIN List: Raspberry Pi Complete Enclosure: B09JNHKL2N, B09S11Q684.
  • Raspberry Pi Cluster Case: B099RR1ZCT, B09K439BTY all are suitable for this fan adapter..
Check Stock

GeeekPi Raspberry Pi Cluster Case, Raspberry Pi Rack Case Stackable Case with Cooling Fan 120mm RGB LED 5V Fan for Raspberry Pi 4B/3B+/3B/2B/B+ and Jetson Nano (8-Layers)

  • Wide Application --- The new 8-layers cluster case is designed for Raspberry Pi clusters, Raspberry Pi NAS servers, Jetson Nano clusters, and disk array clusters to to provide shell protection and cooling solutions. It’s compatible with Raspberry Pi4B/3B+/3B/2B/B+, 2.5MM HDD, Jetson Nano (Note: Not for Raspberry Pi Zero).
  • Better Cooling Effect --- With 120mm 5V RGB LED Fan for better heat dissipation.
  • This case is open on three sides with each acrylic layer containing enough space for maximum air flow for each Raspberry Pi.
  • With a large fan on one side to flow strong wind for reducing the temperature of each Raspberry Pi.
  • Good compatibility with Raspberry Pi --- It can be access to all ports of Raspberry Pi board, such as GPIO port, HDMI port, USB port, SD Card slot and so on. It’s also compatible with the latest Raspberry Pi 4 Model B and Raspberry Pi 3B+/3B/2B/B+..
Check Stock

GeeekPi Raspberry Pi Cluster Case, Raspberry Pi Rack Case Stackable Case with Cooling Fan 120mm RGB LED 5V Fan for Raspberry Pi 4B/3B+/3B/2B/B+ and Jetson Nano

  • Wide Application --- The new 4-layers cluster case is designed for Raspberry Pi clusters, Raspberry Pi NAS servers, Jetson Nano clusters, and disk array clusters to to provide shell protection and cooling solutions. It’s compatible with Raspberry Pi4B/3B+/3B/2B/B+, 2.5MM HDD, Jetson Nano (Note: Not for Raspberry Pi Zero).
  • Simple Installation --- The long fixing screws are designed with flat head screws, smooth and easy to install. The fool-proof design of the positioning holes can prevent you from having trouble during installation. A variety of screws with different specifications can meet your various product fixing needs. For example, Raspberry Pi, 2.5-inch hard drive, 3.5-inch hard drive, Jetson Nano and so on..
  • Better Cooling Effect --- With 120mm 5V RGB LED Fan for better heat dissipation.
  • This case is open on three sides with each acrylic layer containing enough space for maximum air flow for each Raspberry Pi.
  • With a large fan on one side to flow strong wind for reducing the temperature of each Raspberry Pi.
  • Good compatibility with Raspberry Pi --- It can be access to all ports of Raspberry Pi board, such as GPIO port, HDMI port, USB port, SD Card slot and so on. It’s also compatible with the latest Raspberry Pi 4 Model B and Raspberry....
Check Stock

GeeekPi New Raspberry Pi Cluster Case, Raspberry Pi Rack Case Stackable Case with Cooling Fan 120mm RGB LED 5V Fan for Raspberry Pi 4B/3B+/3B/2B/B+ and Jetson Nano (12-Layers)

  • Wide Application --- The new 12-layers cluster case is designed for Raspberry Pi clusters, Raspberry Pi NAS servers, Jetson Nano clusters, and disk array clusters to to provide shell protection and cooling solutions. It’s compatible with Raspberry Pi4B/3B+/3B/2B/B+, 2.5MM HDD, Jetson Nano (Note: Not for Raspberry Pi Zero).
  • Simple Installation --- The long fixing screws are designed with flat head screws, smooth and easy to install. The fool-proof design of the positioning holes can prevent you from having trouble during installation. A variety of screws with different specifications can meet your various product fixing needs. For example, Raspberry Pi, 2.5-inch hard drive, 3.5-inch hard drive, Jetson Nano and so on..
  • Better Cooling Effect --- With 120mm 5V RGB LED Fan for better heat dissipation.
  • This case is open on three sides with each acrylic layer containing enough space for maximum air flow for each Raspberry Pi.
  • With a large fan on one side to flow strong wind for reducing the temperature of each Raspberry Pi.
  • Good compatibility with Raspberry Pi --- It can be access to all ports of Raspberry Pi board, such as GPIO port, HDMI port, USB port, SD Card slot and so on. It’s also compatible with the latest Raspberry Pi 4 Model B and Raspberr....
Check Stock

LoveRPi Power-Over-Ethernet (PoE) HAT Kit for Raspberry Pi 3 Model B+ with Black Case

  • ULTIMATE POWER OVER ETHERNET HAT FOR RASPBERRY PI 3 B+: Deliver clean and reliable power to the latest Pi 3 Model B+ by removing the problematic MicroUSB plug altogether! Power-over-Ethernet is both simple, power efficient, and cost effective compared to having multiple power adapters..
  • BUILT FOR CLUSTER NODES: Simplify cable management and expand your on-premise cloud with POE! Power five, ten, twenty Raspberry Pi 3 Model B+ boards through a single POE switch. This PoE HAT was designed to exceed the power delivery standards set by the official Raspberry Pi PoE HAT and other products available on the market..
  • POWER OVER ETHERNET SWITCH REQUIRED: Network switch must be compliant with IEEE 802.3af PoE standard. PoE power output must be within the budget of the switch when powering multiple boards. PoE switch and Raspberry Pi 3 Model B+ sold separately..
  • ANODIZED HEATSINK AND VENTILATED CASE WITH COOLING FAN INCLUDED: Raspberry Pi 3 Model B+ gets very hot and active cooling is the only way to prevent temperatures from exceeding 150°F! This kit includes everything you need to keep your PoE powered board operating at maximum performance. Raspberry Pi 3 Model B+ sold separately!.
  • NOT COMPATIBLE WITH RASPBERRY PI 4 OR RASPBERRY PI 3 MODEL B AND OLDER MODE....
Check Stock

UCTRONICS SSD Baseplate for Raspberry Pi Cluster, Supports 2 Units of 2.5” Solid State Drives

  • This bracket is specifically designed for Raspberry Pi cluster ASIN B096MKY263, so as to get a bigger Network attached storage for Raspberry Pi, compatible with 2.5” SSD (7mm/9mm)..
  • Easy to Setup: Just insert your SSDs, fix them with the screws, and assemble it with the RPi baseplate, then mount them to the cluster..
  • Quality Built: Made of aluminum alloy, matte black powder coat finish, have nothing breaking off, paint chips, sharp exposed edges (plate corners are rounded off smooth)..
  • Applications: This is a solution to expand the storage of your Pi with 2 2.5" SSDs, perfect for game or media servers, security monitoring, or other projects expanding the functions of Raspberry Pi..
  • NOTE: Please search for ASIN B096MKY263 to get the RPi cluster rack, and ASIN B094D12ZXF to get the SATA adapter as you need..
Check Stock

Miuzei Raspberry Pi 4 Case with Fan Cooling Pi 4 Case with 4 Pcs Aluminum Heat Sinks Pi 4B Case for Raspberry Pi 4 Model B -Black/Blue (Pi 4 Board Not Included)

  • Raspberry Pi 4 Case for Raspberry Pi 4 - Miuzei clear blue acrylic raspberry pi 4b case is specially designed for raspberry pi 4 modle b / 4 b, and perfect compatible with raspberry pi 4 /4b. assembly easy for beginners and amateur..
  • Raspberry Pi 4 Case With Fan - New Raspberry pi 4b case with a Silence DC 5V cooling fan and 4 pcs Aluminum heatsinks, cooling system keep your Raspberry pi 4 B cool quickly even the CPU under high load..
  • Raspberry Pi 4 Model B Case - acrylic pi 4 case won’t block the signal.the rubber feet on the bottom lid can provide a stable platform for raspberry pi 4 case so that it allows air to circulate on the bottom side of the board and avoid the screws scratching the desk surface..
  • Easy To Access All Ports - Miuzei raspberry pi 4 case fan can perfect Access to the USB-C Power Connector, Dual Micro HDMI, Audio/Video, USB and Ethernet Ports, GPIO Port, Camera Cable, and Access to the Micro SD Card..
  • Packaging Content & After -Sales - you will receive pi 4 clear blue case, 4 piecess raspberry pi heatsink, 35mm cool fan, 4 piecess rubber feet, screwdrive, awesome looking, it can make your pi looks cooler than others. if you encounter any problems, you can contact us at any time, and we will answer you..
Check Stock

Smraza Raspberry Pi 3 B+ Case with Fan, 5V 2.5A Power Supply and 3 Heat Sinks for Raspberry Pi 3 Model B+ (B Plus), 3B, 2B

  • ✓ The Latest Version 9 Layers case for Raspberry Pi 3 model B+ / Raspberry pi 3 /pi 3 model b / pi 2 / pi 2 b (Not include Pi Board).
  • ✓ Raspberry Pi Case has the layout design for the Raspberry pi 3 model b+ and will perfectly protect your pi components.
  • ✓ Easy to access all GPIO ports - Raspberry pi case with cutout to allow Pi's GPIO, HDMI, USB, SD, Power Supply and Other GPIO Ports access.
  • ✓ Made of Acrylic, the raspberry pi 3b case Won’t Block your raspberry pi's Wifi / Bluetooth Signal.
  • ✓5V 2.5A power supply with 59 Inch power cable is durable, on/off switch would cause less wear and tear on your raspberry pi's power port. Package Include: Raspberry Pi 3 B+ Case, Fan, 3 Pcs Heatsinks, 2.5A Power Supply.
Check Stock

UCTRONICS Upgraded Complete Enclosure for Raspberry Pi Cluster, with 4 Removable Mounting Brackets for Pi 4B, 3B+/3B, and Other B Model and 2 Cooling Fans ,Support 4 2.5\ SSD and Switch

  • 【Improvement】 In this version, we changed the assembly method based on the previous version(U6184), using frames to connect each side panel. The Complete desktop kit for Raspberry pi 4 Can accommodate 4 Raspberry Pi boards and 4 2.5” SSDs and an ethernet switch. It has 4 reserved SD card cut that allows you to access the SD card from the front of the rack with an extension board(not included). Note: It comes disassembled and needs to be installed briefly before use..
  • 【Front Removable】 Each baseplate is independent so as to easily slide in-and-out, just fixed with thumbscrews, allowing you very convenient and quick access to each node within the cluster for maintenance..
  • 【Quality Built】Made of full metal material,black powder coat finish, have nothing breaking off, paint chips, sharp exposed edges (plate corners are rounded off smooth)..
  • 【Efficient Heat Dissipation 】Efficient Heat Dissipation - Dual 8cm 5V cooling fans provide enough airflow to keep your RPis cool quietly, with a convenient connector and free of light pollution, the fans also can help circulate the air in your closet if you locate the cluster in, so as to improve the heat dissipation of other network equipment..
  • 【Applications 】This is the perfect solution for b....
Check Stock

Smraza Case for Raspberry Pi 4 Model B, Acrylic Case with Cooling Fan, 4PCS Heatsinks, 5V 3A USB-C Power Supply for Raspberry Pi 4B (RPI 4 Board Not Included) - Black and Clear

  • NEWEST RASPBERRY PI 4 B CASE - Unique 9 layer raspberry pi case designed for Raspberry Pi 4 Model B (Pi Board NOT Included). Made of acrylic, the RPI 4B case won't block Pi's Wifi or Bluetooth signal. Note: This case is not suitable for raspberry pi 3..
  • EASY TO ACCESS TO ALL PORTS - Cut-outs for the dual micro HDMI, Audio/Video, USB and Ethernet ports, as well as the USB-C power connector and access to the microSD card.
  • KEEP RASPBERRY PI 4 B COOLING - The Quiet Cooling Fan and 4 pcs Heatsinks are good for heat dissipation of Raspberry Pi board.
  • CONVENIENT TO TURN ON / OFF YOUR PI - Stable 3A USB-C power supply for Raspberry Pi 4 with a handy on/off switch on the 59 inches cable, easily press button to power on Raspberry Pi 4.
  • 100% CUSTOMER SATISFACTION GUARANTEED - If for ANY reason you aren't completely satisfied with the case, please let us know and we will give you a satisfy solution. WARNING: This case is NOT compatible with other model of Raspberry Pi.
Check Stock

Geekworm Raspberry Pi 4 Case, Raspberry Pi 4 Heatsink Aluminum Alloy Passive Cooling Case (P330)

  • 【Passive Cooling Aluminum Alloy Case】Geekworm Raspberry Pi 4 Case - P330 is designed for Raspberry Pi 4 Model B computer only, support Raspberry Pi 4B 1GB/2GB/4GB/8GB version.
  • Cool your Raspberry Pi 4 without fans and noise..
  • 【Add Copper Heatsink for Better Cooling】Equipped with a CPU copper heatsink(to replace the thermal pad) to attach with CPU grease on CPU of Pi4 for better heat dissaption (Not include CPU grease).
  • 【High Quality Aluminum Material】Sturdy and durable, keep your Raspberry Pi 4 free from scratches, dust and damage..
  • 【Easy Access to Raspberry Pi 4 Ports】Easy installation. Easy access to all Raspberry Pi 4 ports, such as GPIO, Micro HDMI, TF Card, USB-C Power Supply ".
  • 【Packing List】1 x Raspberry Pi 4 Aluminum Alloy Case, 1 x Copper Heatsink, 1 x Screws Pack 【Note】NOT include raspberry pi board.
Check Stock