Reviews Raspberry Pi B Power Supply

Miuzei Raspberry Pi 3 B+ Case with Fan Cooling, Pi 3B Case with 3 Pcs Heat-Sinks, 5V 3A Power Supply for Raspberry Pi 3 B+ (B Plus), 3B (No Raspberry Pi Board)

  • NEW DESIGN FOR RASPBERRY PI 3 B - Miuzei Clear Acrylic Raspberry Pi 3 B Case is Specially designed for Raspberry pi 3 B / 3 B+, and perfect compatible with Raspberry Pi 3 B / 3 B+ / 2B. Assembly easy for beginners and children..
  • KEEP RASPBERRY PI 3 B+ COOLING - New Raspberry pi 3 B case with a Silence DC 5V cooling fan and 3 pcs Aluminum heatsinks, double cooling system keep your Raspberry pi 3 B+ cool quickly even the CPU under high load..
  • EASY TO ACCESS ALL PORTS - Miuzei Raspberry pi 3 model B case can perfect access all ports including the micro HDMI, Audio/Video, USB and Ethernet Ports, Micro USB Power Connector and Micro SD Card..
  • ETL LISTED 2.5A Micro USB POWER SUPPLY - Raspberry Pi 3 B case With a 59 inch 5V 2.5A power supply which has an ON/OFF switch, easy to power on/off your Raspberry pi 3 b+ / 3 b / 2 b. No need to worry about overvoltage or overcurrent.
  • 18-MONTH FREE RETURN AND EXCHANGE - Miuzei support lifetime technical support and free return and exchange service for each customers..
Check Stock

Geekworm X820 V3.0 2.5“ SATA HDD/SSD Storage Expansion Board, USB 3.0 Mobile Hard Disk Module for Raspberry Pi 3 B+/3B/ROCK64/Tinker Board&2.5 Inch SATA HDD/SSD

  • ✔ Please use this high quality certified DC 5V 4A power supply(ASIN :B07413Q5Y4).Power supply request: 5Vdc +/-5% , 4A.
  • The power adapter not only powers Raspberry Pi board but also powers your SSD or HDD. If the power is low, the SSD/HDD may not be identified or damage your RPi or X820 board. [Do Not Use ASIN:B01K0608A0!!!].
  • ✔ Raspberry Pi SATA X820 V3.0 HDD/SSD USB3.0 shield expansion board provides an complete storage solution for Raspberry Pi motherboard/ROCK64, Support up to 4TB 2.5 inch SATA interface hard disk drives (HDD) / solid-state drive (SSD). A good raspberry pi sata adapter for Raspberry Pi 3B+, 3B, 2B, B+, ROCK64. Note: For Raspberry Pi 4 Model B 2.5 inch SATA HDD/SSD storage board, please refer to ASIN:B07VXF2HJG.
  • For Raspberry Pi 4 Model B mSATA SSD storage board, please refer to ASIN: B07VXFGFLX.
  • ✔ X820 V3.0 supports USB booting from your HDD/SSD('reboot' command is supported), a useful and reliable function to every raspberry pi users or fans. Suggest to use with geekworm x820 metal case(ASIN :B07GRZRW7J).
  • User manual, pls refer to Geekworm WiKi search(X820)..
  • ✔ Powers the Raspberry Pi via Pi's 40-pin header or Micro USB socket.
  • Furthermore, On-board XH2.54 connector and USB power socket (5V 2A output) to power other devices,....
Check Stock

[17.5W 5V 3.5A] Raspberry Pi 4 Case, with iUniker 17.5W 5V 3.5A USB C Raspberry Pi 4 Power Supply with Switch Heatsink 40mm Cooling Fan for Pi 4 4 8gb/4gb/2gb

  • 【Cooling Raspberry Pi 4 Case】Raspberry Pi 4 B Case with 40mm Fan. Perfectly Protects Your Pi 4 Board. You Can Check The Running Status of The Pi Board at Any Time as Well.
  • 【Accurately Access All Ports】iUniker Raspberry Pi 4 Model B Case Reserves Enough Space for Pi 4 Model B, So Users Can Access All Ports Without uninstall.
  • 【Advanced Cooling System】Raspberry Pi 4 Case with 40mm Fan.This Fan Has Better Heat Dissipation Performance Than Regular. High Performance Heatsink Help Raspberry Pi 4 To Heat Dissipation and Quickly Cool Pi 4 B CPU, GPU and RAM.
  • 【5V 3.5A Type-C Power】iUniker Raspberry Pi 4 B Case with A Power Supply Which 5V 3.5A Type-C Port and Has UL Safety Certification. Pi 4 Power Supply with Switch Length 5 ft (1.5m) Without Risk of Overcurrent and Overvoltage.
  • 【18-month Guaranteed】Our Customer Can Get 18-month Warranty Service and Lifetime Technical Support. Any Doubt Just Reach Our Team by Amazon Email or Support Email..
Check Stock

[5V 3A 15W] Raspberry Pi 3 Case, iUniker Pi 3 b+ Case, Raspberry Pi 3 Power Supply with Switch Raspberry Pi Power Supply (UL Listed)

  • Our Raspberry Pi 3 Case is Specially designed for Raspberry pi 3 B / 3 B+, and perfect compatible with Raspberry Pi 3 B / 3 B+ / 2B. Assembly easy for beginners and children..
  • New Raspberry pi 3 case with a Silence DC 5V cooling fan and 3 pcs Aluminum heatsinks, double cooling system keep your Raspberry pi 3 B+ cool quickly even the CPU under high load..
  • Our Power Supply Compatible only with the Raspberry Pi 2, Pi 3 and Pi 3 B+. NOT Compatible with Raspberry Pi 4.
  • Micro USB plug and UL Listed, Output: 5V DC / 3A Regulated Input: 100 - 240V AC.
  • We support lifetime technical support and free return and exchange service for each customers..
Check Stock

Miuzei Case for Raspberry Pi 4, Raspberry Pi 4 B Case with Fan 30mm, Pi 4 Model B 5V 3A Type-C Power Supply for Pi 4 B case, 4 pcs Aluminum Heatsinks Support Rpi 4B 8gb/4gb/2gb (No Raspberry Pi board)

  • ▶【Newest Raspberry Pi 4 Case】9-layer Acrylic Board With Good Nisibility. Miuzei Raspberry Pi 4B Case Perfectly Protects Your Pi 4 Board. You Can Check The Running Status of The Pi Board at Any Time as Well.
  • ▶【Accurately Access All Ports】Miuzei Raspberry Pi 4 Model B Case Layered Design Reserves Enough Space for Pi 4 Model B So That Users Can Access All Ports Without Barriers.
  • ▶【Advanced Cooling System】Raspberry Pi 4 Case with A Fan (35mm). Large Fan Has Better Heat Dissipation Performance Than Regular. Heatsinks Assists Raspberry Pi 4 To Heat Dissipation and Quickly Cool Pi 4 B CPU, GPU and RAM.
  • ▶【5V 3A Type-C Power】Miuzei Raspberry Pi 4 B Case with A Power Supply Which 5V 3A Type-C Port and Has ETL Safety Certification. Pi 4 Power Supply Length 5 ft (1.5m) Without Risk of Overcurrent and Overvoltage.
  • ▶【12-month Guaranteed】Miuzei’s Customers Can Get 12-month Warranty Service and Lifetime Technical Support. Any Doubt Just Reach Miuzei Team via Amazon Email or Support Email..
Check Stock

Raspberry Pi 3 Model B Board

  • Raspberry pi 3 model b With WiFi & Bluetooth and it is 10 faster than Raspberry pi 2 model b.
  • 2.5 A power supply. With more processor speed and on-board connectivity, you’ll need more power.
Check Stock

NorthPada Raspberry Pi 3 Model B B+ A+ Plus Power Supply Charger AC Adapter Cord 5V 3A PSU Micro USB 5 Feet with Power On/Off Switch, with a USB C Adapter for Raspberry Pi 4 Model B, Pi 400

  • Input: AC 100-240V 0.3A 50/60Hz, Output: DC 5V 3000mA/3A.
  • Cable Length: 150cm/5Feet with On/Off Power Switch, Inline Noise Filter.
  • For Raspberry Pi 3 Model B B+ A+, Raspberry Pi 2 Model B, Raspberry Pi A/A+/B/B+, Raspberry Pi Zero, Raspberry Pi Pico, ASUS Tinker Board S.
  • Come with a micro USB to USB C Adapter, it can also support Raspberry Pi 4 Model B, Raspberry Pi 400.
  • Package included: 1 x 5V power supply with micro usb, 1 x micro USB to USB C Adapter.
Check Stock

Argon ONE Raspberry Pi Micro USB Cable Power Supply 5.25 Volts 3 Amps | UL Listed | 3.3 Feet Long Cable with Micro USB Connector | Micro USB Cable and Wall Charger

  • This Argon Raspberry Pi 3 Power Supply was designed to support Raspberry Pi boards up to the Raspberry Pi 3 Model B+ Boards inside the Argon ONE Rpi3....
  • Voltage Output 5.25 volts DC and 3 Amps Regulated Current | Power Input 100V to 240V AC | 1m / 3.3 ft length USB Charger with built in Micro USB Cable.
  • Allows maximum usage of Raspberry Pi 3 boards under various projects thanks to avoiding under voltage caused by additional accessories on the....
  • While the Argon Power Supply is primarily a Raspberry Pi Power Supply it can also power devices that need a micro usb fast charger or micro usb phone....
  • This Raspberry Pi 3B Power Supply has built-in safety checks to ensure that it can safely be used, even as a MicroUSB Wall Charger at the comfort of....
Check Stock

GeeekPi Raspberry Pi 4 4GB Starter Kit - 32GB Edition, Raspberry Pi 4 Case with PWM Fan, Raspberry Pi 5V 3.6A 18W Power Supply with ON/Off Switch, HDMI Cables for Raspberry Pi 4B (4GB RAM)

  • Includes Raspberry Pi 4 4GB Model B with 64-bit quad-core CPU (4GB RAM).For 2GB Version,please refer to ASIN: B0B7DFF7TY.
  • 8GB Version,please refer to ASIN:B09LYP7QH3.
  • This Raspberry Pi 4B case contains a super quite 40mm PWM fan and 4pcs heatsinks for good heat dissipation of Raspberry Pi 4B..
  • 5V 3.6A Type C Power Supply will make your Pi work more stable. With ON/OFF switch, it's convenient for you to power on and power off your Raspberry Pi 4..
  • 32GB High Speed Class 10 Card with Card Reader and adapter , can work with all version Raspberry Pi.
  • Package Includes:1x Raspberry Pi 4B (4GB RAM).
  • 1x 32GB SD Card (with Card Reader and Adapter).
Check Stock

Smraza Case for Raspberry Pi 4 Model B, Acrylic Case with Cooling Fan, 4PCS Heatsinks, 5V 3A USB-C Power Supply for Raspberry Pi 4B (RPI 4 Board Not Included) - Black and Clear

  • NEWEST RASPBERRY PI 4 B CASE - Unique 9 layer raspberry pi case designed for Raspberry Pi 4 Model B (Pi Board NOT Included). Made of acrylic, the RPI 4B case won't block Pi's Wifi or Bluetooth signal. Note: This case is not suitable for raspberry pi 3..
  • EASY TO ACCESS TO ALL PORTS - Cut-outs for the dual micro HDMI, Audio/Video, USB and Ethernet ports, as well as the USB-C power connector and access to the microSD card.
  • KEEP RASPBERRY PI 4 B COOLING - The Quiet Cooling Fan and 4 pcs Heatsinks are good for heat dissipation of Raspberry Pi board.
  • CONVENIENT TO TURN ON / OFF YOUR PI - Stable 3A USB-C power supply for Raspberry Pi 4 with a handy on/off switch on the 59 inches cable, easily press button to power on Raspberry Pi 4.
  • 100% CUSTOMER SATISFACTION GUARANTEED - If for ANY reason you aren't completely satisfied with the case, please let us know and we will give you a satisfy solution. WARNING: This case is NOT compatible with other model of Raspberry Pi.
Check Stock

GeeekPi Raspberry Pi 4 2GB Starter Kit - 32GB Edition, Raspberry Pi 4 Case with PWM Fan, Raspberry Pi 18W 5V 3.6A Power Supply with ON / Off Switch, 2PCS HDMI Cables for Raspberry Pi 4B (2GB RAM)

  • Includes Raspberry Pi 4 2GB Model B with 64-bit quad-core CPU (2GB RAM).For 4GB Version,please refer to ASIN: B0B3M2HKN6.
  • 8GB Version,please refer to ASIN:B09LYP7QH3.
  • This Raspberry Pi 4B case contains a super quite 40mm PWM fan and 4pcs heatsinks for good heat dissipation of Raspberry Pi 4B..
  • 18W 5V 3.6A Type C Power Supply will make your Pi work more stable. With ON/OFF switch, it's convenient for you to power on and power off your Raspberry Pi 4..
  • 32GB High Speed Class 10 Card with Card Reader and adapter , can work with all version Raspberry Pi.
  • Package Includes:1x Raspberry Pi 4B (2GB RAM).
  • 1x 32GB SD Card (with Card Reader and Adapter).
Check Stock

Dorhea for Raspberry Pi 3 b+ Display 3.5 inch TFT LCD Screen Kit, 3.5'' 480x320 Resolution TFT Touch Screen Moudle with Protective Case Touch Pen Heatsinks for Raspberry Pi 3 B+,Pi 3 B, Pi 2, Pi Zero

  • 3.5 inch HD touch screen designed for Raspberry Pi 3B 2B/B+/A+ /A/B Zero, 320*480 resolution, better display with TFT LCD Display touch screen panel, No external power supply needed.
  • Raspberry Pi Case : Protective case design for Raspberry Pi 2 model B and Raspberry Pi 3 model B,protects your raspberry from scratches and damage, this case is easy to install and has good ventilation.
  • Copper & Aluminum Heatsink : 3 Copper & Aluminum heatsinks make sure your pi works stable,size perfectly matched with paspberry pi ,heatsink to cooling down CPU ,LAN ,VRAM, VGA, RAM, IC Chips, MOSFET SCR, Southbridge ,Northbridge etc.
  • Compatible With : Suitable for Raspberry Pi 3 Model B+,Raspberry Pi 3 Model B, Pi 2 Model B & Pi Model B+ . Access to all controls and features.
Check Stock

[20W 5V 4.0A] Raspberry Pi 4 Power Supply, iUniker 20W USB C Power Supply with ON/Off Switch 5 V 4 A Raspberry Pi Power Supply for Raspberry Pi 4 Model B 8GB/4GB/2GB/1GB (UL Listed)

  • iUniker Raspberry Pi 4 Power Supply – USB C Type C power supply specially designed and tested for the Raspberry Pi 4. Compatible with (Pi 4 Model B), 1GB / 2GB / 4GB / 8GB Version..
  • Raspberry Pi 4B Power Supply with UL Listed Certification – UL Listed. Input: 100-240V AC, 50-60Hz, 0.8A. Output: 5.25V 4A 21W. Cable length: 5ft/1.5m..
  • Raspberry Pi 4 Charger with on/off Switch Design – With on/off switch, it’s convenient to power on or off your Raspberry Pi 4..
  • Our Raspberry Pi 4 Adapter is made of Premium Material – Special design and high quality materials ensure that the adapter can work in low temp and charging safety..
  • 100% Customer Satisfaction Guaranteed – For ANY reason you are not satisfied with our power supply, please let us know..
Check Stock