Reviews Raspberry Pi B Heatsink And Fan

Geekworm Raspberry Pi 4 Aluminum Case, Raspberry Pi 4 Model B Heavy Duty Passive Cooling Metal Case/Housing with Heatsink Pillar for Raspberry Pi 4B Only-Black (P173)

  • Geekworm Raspberry Pi 4 passive cooling aluminum case - P173 is designed for Raspberry Pi 4 Model B computer only, support Raspberry Pi 4B 1GB/2GB/4GB/8GB version.
  • Design with good heat dissipation, passive cooling design, net weight up to 184 grams, don't need to install the cooling fan or heatsink, this is a heatsink case..
  • Access to all ports of Raspberry Pi 4 Model B, GPIO cable interface is reservered, support to install the gpio cable..
  • Made of high quality aluminum material. Equipped with a copper heatsink to replace the thermal pad at the CPU part, and attach proper silicone grease (not included) on two sides of copper heatsink to get better heat dissipation.
  • Reserve the TF Card slot for easy access..
  • Note: The Raspberry Pi 4 Model B is not included in the packing list. for Raspberry Pi 4 PSU: Recommend to use Geekworm UL listed 5V 4A Type-C power adapter (ASIN:B09J856PND)..
Check Stock

Miuzei Raspberry Pi 4 Case with Fan Cooling Pi 4 Case with 4 Pcs Aluminum Heat Sinks Pi 4B Case for Raspberry Pi 4 Model B -Black/Blue (Pi 4 Board Not Included)

  • Raspberry Pi 4 Case for Raspberry Pi 4 - Miuzei clear blue acrylic raspberry pi 4b case is specially designed for raspberry pi 4 modle b / 4 b, and perfect compatible with raspberry pi 4 /4b. assembly easy for beginners and amateur..
  • Raspberry Pi 4 Case With Fan - New Raspberry pi 4b case with a Silence DC 5V cooling fan and 4 pcs Aluminum heatsinks, cooling system keep your Raspberry pi 4 B cool quickly even the CPU under high load..
  • Raspberry Pi 4 Model B Case - acrylic pi 4 case won’t block the signal.the rubber feet on the bottom lid can provide a stable platform for raspberry pi 4 case so that it allows air to circulate on the bottom side of the board and avoid the screws scratching the desk surface..
  • Easy To Access All Ports - Miuzei raspberry pi 4 case fan can perfect Access to the USB-C Power Connector, Dual Micro HDMI, Audio/Video, USB and Ethernet Ports, GPIO Port, Camera Cable, and Access to the Micro SD Card..
  • Packaging Content & After -Sales - you will receive pi 4 clear blue case, 4 piecess raspberry pi heatsink, 35mm cool fan, 4 piecess rubber feet, screwdrive, awesome looking, it can make your pi looks cooler than others. if you encounter any problems, you can contact us at any time, and we will answer you..
Check Stock

[17.5W 5V 3.5A] Raspberry Pi 4 Case, with iUniker 17.5W 5V 3.5A USB C Raspberry Pi 4 Power Supply with Switch Heatsink 40mm Cooling Fan for Pi 4 4 8gb/4gb/2gb

  • 【Cooling Raspberry Pi 4 Case】Raspberry Pi 4 B Case with 40mm Fan. Perfectly Protects Your Pi 4 Board. You Can Check The Running Status of The Pi Board at Any Time as Well.
  • 【Accurately Access All Ports】iUniker Raspberry Pi 4 Model B Case Reserves Enough Space for Pi 4 Model B, So Users Can Access All Ports Without uninstall.
  • 【Advanced Cooling System】Raspberry Pi 4 Case with 40mm Fan.This Fan Has Better Heat Dissipation Performance Than Regular. High Performance Heatsink Help Raspberry Pi 4 To Heat Dissipation and Quickly Cool Pi 4 B CPU, GPU and RAM.
  • 【5V 3.5A Type-C Power】iUniker Raspberry Pi 4 B Case with A Power Supply Which 5V 3.5A Type-C Port and Has UL Safety Certification. Pi 4 Power Supply with Switch Length 5 ft (1.5m) Without Risk of Overcurrent and Overvoltage.
  • 【18-month Guaranteed】Our Customer Can Get 18-month Warranty Service and Lifetime Technical Support. Any Doubt Just Reach Our Team by Amazon Email or Support Email..
Check Stock

LoveRPi Power-Over-Ethernet (PoE) HAT Kit for Raspberry Pi 3 Model B+ with Black Case

  • ULTIMATE POWER OVER ETHERNET HAT FOR RASPBERRY PI 3 B+: Deliver clean and reliable power to the latest Pi 3 Model B+ by removing the problematic MicroUSB plug altogether! Power-over-Ethernet is both simple, power efficient, and cost effective compared to having multiple power adapters..
  • BUILT FOR CLUSTER NODES: Simplify cable management and expand your on-premise cloud with POE! Power five, ten, twenty Raspberry Pi 3 Model B+ boards through a single POE switch. This PoE HAT was designed to exceed the power delivery standards set by the official Raspberry Pi PoE HAT and other products available on the market..
  • POWER OVER ETHERNET SWITCH REQUIRED: Network switch must be compliant with IEEE 802.3af PoE standard. PoE power output must be within the budget of the switch when powering multiple boards. PoE switch and Raspberry Pi 3 Model B+ sold separately..
  • ANODIZED HEATSINK AND VENTILATED CASE WITH COOLING FAN INCLUDED: Raspberry Pi 3 Model B+ gets very hot and active cooling is the only way to prevent temperatures from exceeding 150°F! This kit includes everything you need to keep your PoE powered board operating at maximum performance. Raspberry Pi 3 Model B+ sold separately!.
  • NOT COMPATIBLE WITH RASPBERRY PI 4 OR RASPBERRY PI 3 MODEL B AND OLDER MODE....
Check Stock

GeeekPi Raspberry Pi 4 Aluminum Heatsink with PWM Controllable Fan, Raspberry Pi 4 Armor Lite Heatsink with PWM Speed Control Fan for Raspberry Pi 4 Model B

  • Compatible with Raspberry Pi 4 Model B --- This Armor Lite Aluminum Heatsink is only designed for Raspberry Pi 4 Model B 1GB/2GB/4GB/8GB Version..
  • Support PWM Speed Control --- Different from ordinary fans, this cooling fan supports PWM speed regulation, which is perfectly compatible with Raspberry Pi OS..
  • Good Heat Dissipation Effect --- With 3510 ultra-quiet cooling fan and thermal pads, it can lower the temperature of Raspberry Pi Board quickly..
  • Lightweight and Easy to Install --- With screwdriver and 2pcs screws, it's easy to fix the heatsinks with Raspberry Pi Board..
Check Stock

GeeekPi Raspberry Pi Cluster Case for Raspberry Pi 4 Model B, Raspberry Pi Case with Cooling Fan and Raspberry Pi Heatsink for Raspberry Pi 3 Model B+, Raspberry Pi 3/2 Model B

  • Compatible with Raspberry Pi 4 Model B & Raspberry Pi 3 B+ & Raspberry Pi 3/2 Model B.
  • Access to all ports and slots of Raspberry Pi, including SD card slot, GPIO port, USB ports, HDMI port and so on..
  • The case includes cooling fans and heatsink for cooling down your Raspberry Pi better. The metal protective cover on the top will protect the cooling fan against being destroyed..
  • The stackable case can provide you with an environment to put four pieces of Raspberry Pi board together. The instruction manual will tell you how to assemble step by step..
  • Package Includes: 5x Acrylic Plates, 4x Cooling Fans with Metal Protective Cover, 12x Heatsinks for Raspberry Pi 3B+/3B/2B,16x Heatsinks for Raspberry Pi 4 Model B(Added on 2019.8.2), 1x Screw Set, 1x Screw Driver,1x Instruction Manual.
Check Stock

RasTech Raspberry Pi 3 Model B Starter Kit with 32GB Micro SD Card, Power Supply with ON/Off, Case, Micro SDHC Card, Cooling Fan, HDMI Cable, Network Cable, Heatsinks, Card Reader, Screwdriver

  • Geekworm Raspberry Pi 3B+/3B passive cooling aluminum case is designed for Raspberry Pi 3 Model B Plus and Raspberry Pi 3 Model B..
  • Design with good heat dissipation, passive cooling design, net weight up to 207 grams, don't need to install the cooling fan or heatsink.
  • Access to all ports of Raspberry Pi 3 Model B+ or Raspberry Pi 3 Model B , GPIO cable interface and TF card slot is reservered, support to install the gpio cable and TF card..
  • Made of high quality aluminum material. with 4pcs thermal tapes to attach on your Raspberry Pi 3B+/3B. For Raspberry Pi 3B+, attach the big thin thermal tape on CPU.
  • For Raspberry Pi 3B, attach the big thickness thermal tape on CPU..
  • Note: The Raspberry Pi 3 board is not included in the packing list. Packing List: √1 x Aluminum Case for Pi3.
Check Stock

iUniker Raspberry Pi Cluster Case, Raspberry Pi Case with Cooling Fan and Raspberry Pi Heatsink for Raspberry Pi 3 Model B+, Pi 3 B, Pi 2 B, Pi B+ (4 Layers-Brown)

  • Complete Stackable Clear Acrylic Case Kit for Up To Four Layers.
  • Compatible With Current Raspberry Pi’s including Pi 3 B+, Pi 3 B, Pi 2 B, Pi B+.
  • Our iUniker Raspberry Pi Case is open on all sides with each acrylic layer containing a built in air vent to allow for maximum air flow for each Raspberry Pi.
  • With Quiet Cooling Fan, it can drop the temps for your Pi.
  • Include Raspberry Pi Heatsink, Better Cooling Experience.
Check Stock

Geekworm Raspberry Pi 3 B+ Case, Raspberry Pi 3B+/3B Aluminum Alloy Heavy Duty Passive Cooling Metal Case with Heatsink Pillar for Raspberry Pi 3 Model B+/Raspberry Pi 3 Model B-Black (P252)

  • Geekworm Raspberry Pi 3B+/3B passive cooling aluminum case is designed for Raspberry Pi 3 Model B Plus and Raspberry Pi 3 Model B..
  • Design with good heat dissipation, passive cooling design, net weight up to 207 grams, don't need to install the cooling fan or heatsink.
  • Access to all ports of Raspberry Pi 3 Model B+ or Raspberry Pi 3 Model B , GPIO cable interface and TF card slot is reservered, support to install the gpio cable and TF card..
  • Made of high quality aluminum material. with 4pcs thermal tapes to attach on your Raspberry Pi 3B+/3B. For Raspberry Pi 3B+, attach the big thin thermal tape on CPU.
  • For Raspberry Pi 3B, attach the big thickness thermal tape on CPU..
  • Note: The Raspberry Pi 3 board is not included in the packing list. Packing List: √1 x Aluminum Case for Pi3.
Check Stock

Raspberry Pi 4 Cluster Case, iUniker Raspberry Pi 4 Case with Cooling Fan and Raspberry Pi 4 Heatsink for Raspberry Pi 4 Model B, 3 B+, Pi 3 B, Pi 2 B, Pi B+ (4-Layers)

  • Complete Stackable Clear Acrylic Case Kit for Up To Four Layers.
  • Compatible With Current Raspberry Pi's including Pi 3 B+, Pi 3 B, Pi 2 B, Pi B+.
  • Our iUniker Raspberry Pi Case is open on all sides with each acrylic layer containing a built in air vent to allow for maximum air flow for each Raspberry Pi.
  • With Quiet Cooling Fan, it can drop the temps for your Pi.
  • Include Raspberry Pi Heatsink, Better Cooling Experience.
Check Stock

LoveRPi Professional PoE HAT with PWM Fan Controller for Raspberry Pi 4

  • PROFESSIONAL RASPBERRY PI 4 POE HAT: Ideal for all PoE installation, this isolated PoE HAT offers up to 3KV of PD protection with 4-pin PWM fan header and 2-pin 5V header for displays and other accessories..
  • FULLY ISOLATED: The professional model features an isolation transformer for IEEE 802.3af/at compliance and generalized DC PoE compatibility in most environments. This greatly reduces the risk of electrical loops and allows the Raspberry Pi to be directly grounded through USB, HDMI, or GPIO header making it suitable for commercial applications in non-controlled environments..
  • INTEGRATED PWM FAN CONTROLLER: Based on the EMC2301 SMBus compliant fan controller, this PoE HAT is fully programmable over I2C to control standard 4-pin PWM fans. Set user-space or device-tree based temperature or event triggers for complete fan control from off to maximum RPM. Fan speed tach also provides stall detection, spin-up control, and ramp rate control with 1% accuracy from 500-16K RPM..
  • VENTILATED CASE WITH FAN HIGHLY RECOMMENDED: Do not use this product in an enclosed case without active air circulation. Airflow around the HAT and Raspberry Pi 4 Model B ensures performance and stable operation..
  • EASY INSTALLATION AND BACKWARDS COMPATIBLE: Please remove all non-essent....
Check Stock

Argon NEO Raspberry Pi 4 Case | All Aluminum

  • Argon NEO is a thoughtfully designed aluminum Raspberry Pi 4 case enclosure for the Raspberry Pi 4 with removable magnetic cover.
  • Maximize Pi4 potential as a single board computer by turning it into a tiny desktop, media player, retro console or server. Compatible with Raspberry Pi 4 Model B 1GB / 2GB / 4GB / 8GB..
  • Keeps RPI 4 cooler with the aluminum metal case acting as heatsink. Keep it even cooler with Raspberry Pi accessories like Argon Fan Hat..
  • Easy access to ports connects power cable, external HDD or SSD, display screen and other official RPI and GPIO accessories..
  • Works best with Raspberry OS, Kodi, LibreElec, Ubuntu, Retropie, and other Debian based OS.
Check Stock

Dorhea for Raspberry Pi 3 b+ Display 3.5 inch TFT LCD Screen Kit, 3.5'' 480x320 Resolution TFT Touch Screen Moudle with Protective Case Touch Pen Heatsinks for Raspberry Pi 3 B+,Pi 3 B, Pi 2, Pi Zero

  • 3.5 inch HD touch screen designed for Raspberry Pi 3B 2B/B+/A+ /A/B Zero, 320*480 resolution, better display with TFT LCD Display touch screen panel, No external power supply needed.
  • Raspberry Pi Case : Protective case design for Raspberry Pi 2 model B and Raspberry Pi 3 model B,protects your raspberry from scratches and damage, this case is easy to install and has good ventilation.
  • Copper & Aluminum Heatsink : 3 Copper & Aluminum heatsinks make sure your pi works stable,size perfectly matched with paspberry pi ,heatsink to cooling down CPU ,LAN ,VRAM, VGA, RAM, IC Chips, MOSFET SCR, Southbridge ,Northbridge etc.
  • Compatible With : Suitable for Raspberry Pi 3 Model B+,Raspberry Pi 3 Model B, Pi 2 Model B & Pi Model B+ . Access to all controls and features.
Check Stock