Reviews Ramset Powder Actuated

.22 Caliber Power Load A Crimp Yellow Level 4

  • Light weight duty tool designed for applications such as small room additions and basement remodels.
  • The model HD22 is a low velocity piston type fastening tool.
  • Designed for use with Ramset 0.22 caliber CW powder loads and Ramset fasteners.
  • HD22 single shot .22 caliber powder actuated fastener tool.
  • Delivers a powerful single shot to fasten your projects.
Check Stock

Ramset Powder Fastening Systems SP178 1-7/8-Inch Step Shank Pins 100 Pack

  • Use with Ramset powder actuated tools for general purpose attachments to harder concrete and steel when maximum holding strength is required.
  • Consistent, optimum quality in every pin.
Check Stock

Ramset Powder Fastening Systems 2-1/2-Inch Washer Pin w/Ramguard 100 per Box

  • ITW Ramset powder actuated fasteners are specifically fabricated to meet the exacting requirements of toughness and durability that enable them to....
  • Coated to improve corrosion resistance in treated lumber and other applications.
  • Washer increases bearing surface against the material to be fastened.
  • Designed for use in treated lumber applications.
  • Meets the requirements of toughness and durability that enable them to penetrate dense concrete and structural quality steel.
Check Stock

Freeman PSSCP Pneumatic 3" Single Pin Concrete Nailer with Case

  • Construction Applications: Fasten wood, steel, or other thin metal to concrete walls, cement blocks, and poured concrete slabs fast and easy. Designed for heavy duty jobs such as basement renovations, garage updates, framing, plywood to concrete nailing, wire lathe installation, steel banding, decking, fencing, and subfloors..
  • Compatible Nails: Single concrete pins from 3/4" – 3" and 0.145" diameter, including Ramset and Hilti.
  • Built to Last: One piece hardened steel drive blade results in a durable pneumatic tool resistant to damage.
  • 10 Times Faster than Powder-Actuated Systems: Works with conventional air compressors, hoses and fittings. No powder or certifications required, and no need to pre-drill holes..
  • Ergonomic Body: Rugged but also lightweight and comfortable for extended use.
Check Stock

VOTOER Mini Manual Steel Nail Gun Wall Fastening Rivet Tool, Wire Slotting Device Decoration Tools Shooting Machine for Penetrate Concrete Walls, 7.3mm Diameter

  • Construction Applications: Fasten wood, steel, or other thin metal to concrete walls, cement blocks, and poured concrete slabs fast and easy. Designed for heavy duty jobs such as basement renovations, garage updates, framing, plywood to concrete nailing, wire lathe installation, steel banding, decking, fencing, and subfloors..
  • Compatible Nails: Single concrete pins from 3/4" – 3" and 0.145" diameter, including Ramset and Hilti.
  • Built to Last: One piece hardened steel drive blade results in a durable pneumatic tool resistant to damage.
  • 10 Times Faster than Powder-Actuated Systems: Works with conventional air compressors, hoses and fittings. No powder or certifications required, and no need to pre-drill holes..
  • Ergonomic Body: Rugged but also lightweight and comfortable for extended use.
Check Stock

Woodpecker ST38H 14 Gauge Concrete Nailer with 400 PCS Concrete T Nails, 3/4" to 1-1/2" T Nail Gun for Concrete Nailing, Baseboard, Pallets

  • Construction Applications: Fasten wood, steel, or other thin metal to concrete walls, cement blocks, and poured concrete slabs fast and easy. Designed for heavy duty jobs such as basement renovations, garage updates, framing, plywood to concrete nailing, wire lathe installation, steel banding, decking, fencing, and subfloors..
  • Compatible Nails: Single concrete pins from 3/4" – 3" and 0.145" diameter, including Ramset and Hilti.
  • Built to Last: One piece hardened steel drive blade results in a durable pneumatic tool resistant to damage.
  • 10 Times Faster than Powder-Actuated Systems: Works with conventional air compressors, hoses and fittings. No powder or certifications required, and no need to pre-drill holes..
  • Ergonomic Body: Rugged but also lightweight and comfortable for extended use.
Check Stock

Hare Krishna Hare Rama

  • Not to be used in any type firearms. Use compatible with HILTI DXE37.
  • High performance in penetrate hollow block and concrete.
  • Power level is designated by the load level number marked on each box and also by the color of the box and the....
  • High quality powder loads, Includes 100 power loads per box.
Check Stock

Hilti 3498241 HDM 500 Manual Adhesive Dispenser

  • Available in different strengths: green/3 (light), yellow/4 (medium), red/5 (heavy).
  • Hilti cartridges are designed specifically for use with Hilti powder-actuated tools as part of a matched tolerance system.
  • .27 caliber short cartridges for use with DX 460, DX 351 and DX 36 powder-actuated tools.
  • For driving pins, studs, etc. into concrete and steel.
Check Stock

Hilti 3738Baseplate 36/S13 - DX 36

  • Available in different strengths: green/3 (light), yellow/4 (medium), red/5 (heavy).
  • Hilti cartridges are designed specifically for use with Hilti powder-actuated tools as part of a matched tolerance system.
  • .27 caliber short cartridges for use with DX 460, DX 351 and DX 36 powder-actuated tools.
  • For driving pins, studs, etc. into concrete and steel.
Check Stock

Fastener Pin with Washer, 3/4 in, PK100

  • Use with Ramset SA270, Cobra + and Viper tools, POWERS P3500, PA3500, P3600, Rocket, XT540, Hilti DX350, DX36M, DX451, DX460, 2HNW6, 2HNW7 and all other 27 caliber clone tool.
  • 10 green strips: each strip contains 10 pieces powder loads..
  • Help to provide the power to penetrate heavy duty, hollow block and concrete.
  • Power level is designated by the load level number marked on each box and also by the color of the box and the powder load. As the number increases, the power level increases.
  • High quality powder loads, Includes 100 power loads per box.
Check Stock

Hilti Powder Actuated Fastener Cartridge - .22 5.6/16 - Single - Yellow - Medium - Pack of 100 - 50398

  • Use with POWERS P35S, SIMPSON PT25-S and Ramset R25 tools. and all other 25 caliber clone tool.
  • 10 green strips: each strip contains 10 pieces powder loads..
  • Help to provide the power to penetrate heavy duty, hollow block and concrete.
  • Power level is designated by the load level number marked on each box and also by the color of the box and the powder load. As the number increases, the power level increases.
  • High quality medium powder loads, Includes 100 power loads per box.
  • Improve tool performance and increase fastening accuracy.
Check Stock

Ramset Powder Fastening Systems 1512SD 1-1/2-Inch Washered Pins, 100 Pack

  • Use with Use with Ramset SA270, Cobra + and Viper tools, POWERS P3500, PA3500, P3600, Rocket, XT540, Hilti DX350, DX36M, DX451, DX460, 2HNW6, 2HNW7 and all other 27 caliber clone tool.
  • 10 yellow strips: each strip contains 10 pieces powder loads..
  • Help to provide the power to penetrate hollow block and concrete.
  • Power level is designated by the load level number marked on each box and also by the color of the box and the powder load. As the number increases, the power level increases.
  • High quality powder loads, Includes 100 power loads per box.
Check Stock

0.27 Caliber Red Shot Strip Loads, Power Fasteners Actuated Powder Loads (100-Count)

  • Use with Ramset SA270, Cobra + and Viper tools, POWERS P3500, PA3500, P3600, Rocket, XT540, Hilti DX350, DX36M, DX451, DX460, 2HNW6, 2HNW7 and all other 27 caliber clone tool.
  • 10 red strips: each strip contains 10 pieces powder loads..
  • Help to provide the power to penetrate hollow block and concrete.
  • Power level is designated by the load level number marked on each box and also by the color of the box and the powder load. As the number increases, the power level increases.
  • High quality powder loads, Includes 100 power loads per box.
Check Stock