Reviews Ramps Drivers

MKS Gen L V2.0 3D Printer Integrated Motherboard Controller PCB Board A4988/DRV8825/TMC2208/TMC2130 Like Ramps 1.6 MKS Gen V1.4 Mainboard 1PCS

  • ❤️ Integrate 2560 and Ramps1.4 one PCB,easier wiring and more stable.
  • ❤️Use high-quality 4 layer PCB&Use special power chip,support 12V-24V, also Use Marlin firmware,same as configuration way as Ramps1.4, it can replace Ramps1.4 directly.
  • ❤️ Support a variety of stepper drivers:4988,8825,TMC2208 and TMC2100, and available to work with LCD2004,LCD12864,MKS.
  • ❤️TFT24/28/32/35 & Available to connect external large stepp drivers Accept 24V input,reduce the heated bed current to 1/4 that slove the Mosfet heat problem efficiently.
  • ❤️Retail Servos,AUX-1 and AUX-2 interface of Ramps1.4 provide three 5V output and three 12V output interfaces.
Check Stock

MKS GEN L V1.0 Controller Board 3D Printer Kit Mainboard Ramps1.4 Dual Extruder Touch for 3D Printer Accessories

  • Support a Variety of Stepper Drivers -- 2560 and Ramps 1.4 are integrated in the board, which avoids the problem of complicated connectors and malfunctioning. Support a variety of stepper drivers such as A4988, DRV8825, TMC2100, available to change the stepper drivers and motors as users like..
  • Reserve External Driver Signal -- available to connect external high-current driver to drive the 57 and 86 stepper motors. Use high-quality MOSFET, better cooling effect and more stable. Use specific power chip, support 12V-24V power input, and resolve t..
  • Use CH340 Serial Port Chip -- Stable and reliable filter circuit greatly reduces interference and avoids crashes as possible in the process of printing. Use CH340 serial port chip, more easily install the drive than 16U2..
  • Support 24V Input -- The heated bed current can be reduced to 1/4 at the same system power which effectively resolves the problem that the MOSFET of heated bed heats. Run Marlin firmware, the configuration is completely same as Ramps 1.4..
  • Compatible With -- Support Ramps 1.4, 2004LCD,12864LCD, TFT28 and TFT32. X-axis, Y-axis and Z-axis with different color terminal controls the stepper motors and endstops, which is convenient to wire..
Check Stock

Aoicrie MKS Gen L V1.0 3D Printer Integrated Mainboard Controller PCB Board Compatible Ramps1.4/Mega2560 R3 with A4988 Motor Driver for 3D

  • ...rmware,same as configuration way as Ramps1.4, it can replace Ramps1.4 directly..
  • Use high quality MOSFET tube,better cooling and more stable.Use special power chip,support 12-24V input,reduce the heated bed current to 1/4 that slove the Mosfet heat problem efficiently and power shortage..
  • Support a variety of stepper drivers: A4988,DRV8825,TMC2208 and TMC2100, and available to work with LCD2004,LCD12864,MKS TFT24/28/32/35 & Available to connect external large stepp drivers, A4988 driver board widely used in 3D printers and small CNC machines..
  • Support functions: Non-trace resumption after power off, run out filament ,and auto shut down, XTZ axis with different color terminal controls the motors and end stop,which is convenient to wire.Use high-quality 4 layer PCB&Use special power chip.Retail Servos,AUX-1 and AUX-2 interface of Ramps1.4 provide three 5V output and three 12V output interfaces..
  • Five different step resolutions: full-step, half-step, quarter-step, eighth-step, and sixteenth-step.Adjustable current control lets you set the maximum current output with a potentiometer, which lets you use voltages above your stepper motor's rated voltage toachieve higher step rates.Use the configuration file to set the driving current mode, avoid manual adjustm....
Check Stock

YJYGR Mega2560 R3+RAMPS 1.4+A4988 Optical Endstop 3D Printer Mainboard Module Board

  • Smooth transmission, bumpers, damping capacity, low noise level..
  • RAMPS 1.4:It is a Mega Pololu Shield, or RAMPS for short, designed to fit the entire electronics needed for a RepRap in one small package for low....
  • RAMPS interfaces an Mega with the powerful MEGA platform and has plenty room for expansion..
  • The modular design includes plug in stepper drivers and extruder control electronics on an MEGA shield for easy service, part replacement,....
  • We are a professional Amazon store. If you have any questions, you can contact us at any time. We sincerely create a good buying experience for every....
Check Stock

3D Printer MKS Gen-L V1.0 Controller Board MKS Integrated Mainboard Motherboard Compatible with Ramps1.4 Supports TMC2100 A4988 8825 Driver LCD2004 LCD12864 TFT28 TFT32

  • 2560 and Ramps 1.4 are integrated in the board, which avoids the problem of complicated connectors and malfunctioning. Reserve external driver signal,....
  • Use specific power chip, support 12V-24V power input, and resolve the problems of chip heating and power shortage. Use high-quality MOSFET, better....
  • Use CH340 serial port chip, more easily install the drive than 16U2. Stable and reliable filter circuit greatly reduces interference and avoids....
  • Run Marlin firmware, the configuration is completely same as Ramps 1.4, and available to directly replace the Ramps 1.4. Support Ramps 1.4,....
  • Plug the stepper drivers according to the different color terminals which decreases the probability of reverse and prevents the controller board....
Check Stock

Bruder Toys Man TGA Low Loader Truck With JCB Backhoe Loader

  • Tipping Drivers Cab reveals view of engine block.
  • Clip-on low loader with fifth wheel coupling and fold down loading ramps.
  • Front screen made of transparent unbreakable polycarbonate.
  • Locks in highest position tilting front shovel drivers seat swivels 360 Degree.
Check Stock

Ender 3 Upgraded Silent Board Motherboard V4.2.7 with TMC2225 Driver Marlin 2.0.1 for Ender 3/ Ender 3 V2/ Ender 3 Pro/Ender 5 Customized and Non-Standard Matching

  • 3D Printer Controller RAMPS 1.4 interfaces an Arduino Mega2560 board. The modular design includes plug in stepper drivers and extruder control....
  • With LCD 12864, you can easy connect it to your Ramps board using the "smart adapter" included. After connecting this panel to your Ramps you don't....
  • It is designed to fit the entire electronics needed for a RepRap in one small package for low cost.
  • Please Note : No technical support for this product..
Check Stock

Ickiya MKS Gen L V2.1 3D Printer Control Board Motherboard, Open Source Marlin Support TMC2209/TMC2208/TMC2208/TFT35 V3.0/TFT35 E3/BL TOUCH/LCD12684 for Ramps 1.4 /Ramps 1.5/Ramps 1.6 3D Printer

  • ✅Integrate 2560 and ramps1.4 are intergrated on a piece of board, which solves the problem of complicated and easy failure for Ramps1.4 composite interface.Users can change their own motor drive, support A4988/TMC2209/TMC2208/TMC5160/DRV8825 stepper drivers.
  • ✅Using CH340 serial chip to ensure the stable and reliable premise, reduce the cost, and to solve the problem of the previous 16U2 hard drive.Using the open source firmware for Marlin, the configuration is exactly the same as for ramps1.4, and can replace for Ramps1.4 directly..
  • ✅24V input can be accepted, and the same system power can reduce the hot bed current to 1/4, effectively solving the hot bed MOS tube heating problem..
  • ✅It can be directly connected to 2004LCD display and 12864LCD display, and can be supported by TFT28 /TFT32/TFT35/TFT50/TFT70 touch screen..
  • ✅The XYZ axis adopts the terminals of different colors to correspond to the motor and the limit switch, and the connection is convenient,reduces the probability of inserting and reversing, and prevents the main board from being damage by the oppsite inserted of the drive..
Check Stock

RAMPS 1.4 Controller + MEGA2560 R3 Board + 5pcs Soldered A4988 Stepper Motor Drivers + 5pcs Heat Sinks + 19pcs Jumpers with USB Cable for RepRap 3D Printer Kit

  • SAVING SPACE: The RAMPS 1.4 board is designed to fit the entire electronics needed for a RepRap in one small package. So it can save space and cost..
  • SCALABLE: RAMPS interfaces an Mega with the powerful MEGA platform and has plenty room for expansion. A number of expansion boards can be added to the system as long as the main RAMPS board is kept to the top of the stack..
  • EASY TO USE: Using the bootloader, you can download the program directly via USB without using other external writers. Development IDE interface is based on open-source principles, allows you to free download for use in project work, school teaching, motor control, interactive works..
  • MODULAR DESIGN: The modular design includes plug in stepper drivers and extruder control electronics on an MEGA shield for easy service, part replacement, upgrade-ability and expansion..
  • POWER SUPPLY AND DRIVER: Supply part of the optional USB power, or as an external power using the AC-to-DC adapter and battery. This stepper motor driver lets you control one bipolar stepper motor at up to 2 A output current per coil..
Check Stock

K'NEX Monster Jam Grave Digger versus Maximum Destruction Set

  • Build Grave Digger and Maximum Destruction at the same time.
  • Both monster trucks include K’NEXmen drivers and pull-back motors.
  • Enough parts to build ramps and things to destroy.
  • Step-by-step building instructions included.
Check Stock

Aluminum Truck Ramps, KOLOTOOL 7.5ft Loading ramps 1500lbs Four Wheeler ramps for Lawn Mower,ATV,Golf Cart

  • 【Truck Loading Ramps Folding】(Unfolded Size: 89.8*12”.
  • Folded Size: 45.7*12”). ATV truck bed ramps are ideal for transferring any four-wheeled vehicle or two-wheeled vehicle to a truck trailer..
  • 【Lightweight&Sturdy Aluminum Loading Ramps】Metal foldable truck ramp’s net weight is only 16 lbs(each）and its load capacity of 750 lbs each, combined rating 1500 lbs. Before use, please confirm the weight of the machine you will carry, please do not exceed the max capacity..
  • 【Cargo Trailer Ramps with Rubber Tipped Fingers & Safety Straps】Ramps include heavy duty load straps to keep the aluminum ramp firmly attached to the tailgate. This ensures safe transfer onto a truck without collapsing or buckling. Rubber tipped fingersprovide extra safety for your vehicle while also preventing damage to the tailgate..
  • 【Arched Ramps for Four Wheeler Ramp】 Powersports loading ramps do have a slight arch, once installed and strapped to the bumper, to achieve a heavier load rating. Ramps can be used as pickup truck ramps,truck loading ramps,ATV ramps,golf cart ramps,four wheeler ramps,riding lawn mower ramps,tailgate ramps..
  • 【KOLOTOOL Ramps Quality Guarantee】Ramps are manufactured from high-grade Aluminum, professionally welded, and will last a lifeti....
Check Stock

2Pack Curb Ramp with one Large Hose Hook, Portable Lightweight Heavy Duty Plastic Driveway Curb Ramps for Low Cars,Motorcycle Ramp,Curb Ramps (5.12 inch High)

  • CURB RAMPS SIZE – 2 connected Curb Ramps has 19.7 Inch /50 cm width, 10.6 Inch /27cm length and 5.12 inch / 13cm High. It can fit any ramps liking shed ramps, car ramps, ramps for trucks, Road curb ramps, squat road ramps. The Curb Ramp can fit up to 5.12 Inch high and get your wheeled vehicle over ramps easily..
  • CURB MODE – 2 or more Connected Parking Curb can be installed any ramps and work for any cars, trucks, moto and others..
  • HIGH VALUE INCLUDED – The item includes 2 Curb Ramps/Packing Curb and one Large Hose Hook. It will make you value to use for car parking, over curb ramp and hang various water pipes in your garage..
  • HEAVY DUTY – Amazing 22,000 lbs Withstand Ability with High Density PVC plastic material manufactured. The Curb Ramps can ruggedly withstand any vehicles easily..
  • SPLICING DESIGN and FAST ASSEMBLY – The Curb Ramps/Parking Curb are designed for splice connection. In ground you only simply clear holes with drill and fix the Parking Curb by 2 fixed expansion screws..
Check Stock

VENDAV ATV Ramps for Pickup Trucks 7.5 FT Aluminum Portable Ramps 1500 Lbs Capacity,2PC.

  • ✪【ALUMINUM LOADING RAMP--LIGHTWEIGHT&STURDY】：Portable and lightweight truck ramps built from high-strength aluminum,lightweight, durable, weather resistant.The ATV ramps weight is only 15.5lbs(each）,This weight is easy to use without assistance.These ramps have a load capacity of 750 pounds each, combined rating 1500 LBS.Before use, please confirm the weight of the machine you will carry, please do not exceed the max capacity ..
  • ✪【FOLDABLE LOADING RAMPS--FOLDABLE & NO ASSEMBLY REQUIRED】：The aluminum ramps are easy to use,just open it and ready to use. No installation required.(Unfolded Size: 89*12”.
  • Folded Size: 46*12”).The motorcycle ramp are 46 inches when folded, will fit in most back seats for easy carry and easy storage..
  • ✪【PICKUP TRUCK RAMPS -- RUBBER TIPPED FINGERS&LOAD STRAPS】：These truck ramp include heavy duty load straps to keep the aluminum ramp firmly attached to the tailgate. This ensures safe transfer onto a truck without collapsing or buckling. Rubber tipped fingersprovide extra safety for your vehicle while also preventing damage to the tailgate..
  • ✪【PROFESSIONAL WELDING & MATURE PRODUCTION TECHNOLOGY】：Crossbars ，heavy-duty hinges, joints are professionally welded, so the powersports loading ramps ....
Check Stock