Reviews Rail Clamp Rod Holder

Fishing Boat Rod Holder, 1/2/4 Pack Pole Stand Rack, 360° Adjustable Holder Racks Bracket for Kayak Canoe Raft Fishing, Reinforced Nylon

  • 【High-quality Clamp】- The set includes 2 pack fishing pole boat holders. Clamp max opening is 1.8 Inch. Fishing Rod Holder gives you versatility and convenience while fishing..
  • 【Easy to Install】- The rod holder has a clamp base to attach on objects. Open end grip design accommodates to all types of rods . There is no drilling needed for installation, and you can choose to have it surface mounted or rail mounted..
  • 【360° Adjustable】- By adjusting two different screw joints, fishing rods can be adjusted to any orientation you want. It was designed as a multi-function rod holder for a wide range usage from spinning, casting to spin cast and so on fishing for large medium and small fish species..
  • 【Eco-friendly Material】- This fishing boat rod holder is totally made of high quality and eco-friendly material--strong & anti-corrosion, constructed with high impact resistant heavy duty ABS..
  • 【High Impact Resistant Construction】- The construction is very easy to hold on the boat or kayaks which is very steady. Great fishing rod holders for boats or kayaks, it includes....
Check Stock

Amarine-made 5 Rod Holders Angle Adjustable Rod Holders Fishing Console Boat T Top Rod Holder Rocket Launcher Adjustable Fishing Rod Holder for Rails 1" to 1-1/4"

  • The clamp size is 2 inch, we supply 2 rubber inserts for 1" to 1-1/4" inch size tubing..
  • Adjustable Fishing Rod Holder for Rails 1" to 1-1/4".
  • The 5 rod holders will clamp to your T-Top, hardtop, tower, radar arch, rail or any structure made from 2 inch tube pipe (without insert), 1.5inch-1.75inch pipe (with insert)..
  • You will have a place for you fishing rods in a safe place off your floor.
  • Stainless Steel Clamp On Adjustable Fishing Rod Holder for Rails 1" to 1 1/4". It Can Adjust to Any Angle..
Check Stock

Emoly Upgraded Baby Cup Holder, Universal Stroller Cup Holder Bottle Holder Large Caliber Designed 360 Degrees Rotation Fit for Baby Stroller, Bicycle, Wheelchair, Walker, Trolleys

  • 【High Adaptability】The Multifunctional cup holder can be installed in baby pram, armrest, scooter, kid bicycle, wheelchair , all kinds of mountain bicycles, office chair, buggies, recliner etc，To put different sizes bottles, like water bottle, coffee mug, baby bottle etc..
  • 【Adjustable Size】The Multifunctional cup holder is suitable for the pushchair rod of 2-4. 5cm diameter and can firmly clamp on the baby buggy rod to avoid sliding easily. The width of the clip can be freely adjusted, thus the cup holder can be installed on different styles of strollers..
  • 【Simple Operation】Tools free and simple to install, you can get it ready without any tools..
  • 【Flexible Clamp】The quick-attach clamp with rubber pad can attach to almost any shape, tube, rail or seat and allows 360 degree rotation as well. The cup holder is perfect for different sizes bottles, like water bottle, coffee mug, baby bottles, etc..
  • 【Scientific and Safe Design】The cup holder is made of safe and materials. The ABS plastics and slip resistant sheet ensure that cups can keep steady in the buggy cup holder even on the rough road..
Check Stock

AresKo Fishing Boat Rod Holder, Fishing Rods Holder, Fishing Rod Racks with 360 Degree Adjustable Large Clamp (2 Pack)

  • 【Practical Gift】: These fishing rod holders are designed to make things easy when fishing: When fishes bite slowly, our fishing rod holder can do a big favor for you by doing the most tedious task: hold the rod. Owing to our unique design and delicate package, it can be the best gift for your family member or friends who are addicted to fishing..
  • 【Easy Installation】: The rod holder has a clamp base to attach on objects. Open end grip design accommodates to all types of rods . There is no drilling needed for installation, and you can choose to have it surface mounted or rail mounted..
  • 【Steady Construction】: Our universal fit holder fits any common rod, with or without a reel. And we put a ring lock to prevent rod loss when big fish bites. This holder is applicable to boats and kayaks..
  • 【3D All Direction Adjustable】: By adjusting two different screw joints, fishing rods can be adjusted to any orientation you want. It was designed as a muti-function rod holder for a wide range usage from spinning, casting to spin cast and so on fishing for large medium and small fish species..
  • 【Top-class Material】: The fishing rod holder is totally made of high-quality and eco-friendly material which featured as high impact resistance and anti-corrosion ....
Check Stock

Marinebaby 5 Rod Holders Angle Adjustable Rod Holders Fishing Console Boat T Top Rod Holder Rocket Launcher Adjustable Fishing Rod Holder for Rails 1' to 1-1/4'

  • The clamp size is 2 inch, we supply 2 rubber inserts for 1" to 1-1/4" inch size tubing..
  • Adjustable Fishing Rod Holder for Rails 1" to 1-1/4".
  • The 5 rod holders will clamp to your T-Top, hardtop, tower, radar arch, rail or any structure made from 2 inch tube pipe (without insert), 1.5inch-1.75inch pipe (with insert)..
  • ou will have a place for you fishing rods in a safe place off your floor.
Check Stock

LEFTFOTO Camera Cage Top Handle NATO Rail Standard with 7mm NATO Rail for DLSR Camera Cage,Anti-Off and Quick Release Design.

  • 【Quick Release System】Package Include NATO Rail Standard Handle & 7mm NATO Rail,Simply Slide Onto NATO Rail and Tighten Down The Wingnut Screw,Easy to Disassembly..
  • 【Multiple Screw Holes & Cold Shoes】4*Cold shoes and Multiple Screw Holes To Mount LED Lights,Microphones,Monitors,etc. There are Also Multiple 1/4"and 3/8" mounting points for additional accessories attachment..
  • 【BUILT-IN Rod Clamp】There are 15mm Rod Clamp,Meets The Need For Mounting Rod Accessories..
  • 【BUILT-IN Spanner】Cage Top Handle Has a Hex Spanner,And It Attaches Via Magnet Inside The Handle.This Is Convenient For Shooting Outdoors, Which Is More Convenient and Fast..
  • 【Wide Compatibility】Compatible With Most Camera Cages With Excellent Stability,It Can Be Attached To Any Accessories With Two 1/4" Holes..
Check Stock

SmallRig Battery Grip Compatible Cage Only for BMPCC 6K Pro, Comes with Built-in NATO Rail & Locating Holes for ARRI and Cold Shoe Mount - 3382

  • ...minum alloy, with matte surface and strong oxygen resistance..
  • 【MULTIPLE MOUNTING POINTS】It is equipped with multiple mounting points, such as 1/4" & 3/8" threaded holes, cold shoes, NATO Rail and locating holes for ARRI, allowing you to connect more accessories such as SmallRig Top Handle 2165, and SmallRig SSD Holder 3300 for Samsung T5 SSD, etc..
  • 【FEATURED RECOMMENDATIONS】It features a NATO rail and multiple 1/4" threaded holes on the left side, that could attach NATO Side Handle 2187 for handheld shooting and dedicated HDMI & USB-C cable clamp 3271 for stable signal. The holes at top-right corner and bottom-left corner allow access to follow focus rod clamp 3276. Its bottom is compatible with dual rod clamp 1943, ensuring the distance between the dual rods and the center of the lens is 85mm, and allowing installing lens support..
  • 【SWEET DESIGN】Strap slots are included to add a wrist strap or neck strap for your camera to prevent dropping. Besides, with built-in magnetic suction design, the included screwdriver is ready for your assembly without fear of loss..
Check Stock

Action Mount - Picatinny Rail Mount + Smartphone Mount for Video Recording While Hunting Paintball or Target Practice Universal Mount Fits Most Phones.

  • HEAVY DUTY PHONE CLAMP - This adjustable threaded device holder contains a screw mechanism so you can lock you device in place with ease..
  • TIGHT GRIP - clamp opens from 55 mm to 102 mm wide and contains angled lip on top and bottom that creates a non-slip hold so you can so you can be....
  • RAIL MOUNT - This CNC rail mount fits all standard rail designs, includes screw-pin tightening system to lock in place. This pin can be tightened by....
  • iPhone Compatible- This works with iPhones, or any phones, and allows you to view the screen so you easily start and stop video recording. Also, this....
  • WHAT'S INCLUDED - High Quality adjustable phone clamp, Picatinny Rail mount. This holder fits most phones..
Check Stock

SMALLRIG Lightweight Top Plate for BMPCC 4K & 6K - APT2510

  • 【FOR BMPCC 4K & 6K】SMALLRIG APT2510 is designed to mountarious accessories such as a monitor or top handle on your Blackmagic Design Pocket Cinema....
  • 【ANTI-TWIST】The multifunctional top plate for BMPCC 4K & 6K firmly mounts to the camera using a 1/4”-20 screw and features an anti-twist....
  • 【MOUNTING POINTS】The plate features a variety of mounting options including 1/4”-20 and 3/8”-16 holes, two locating holes for ARRI standard,....
  • 【SINGLE 15MM ROD CLAMP】The included 15mm rod clamp is detachable and can mount on several selected places, so you can use a seperately available....
  • 【BUILT IN NATO RAIL & COLD SHOE】The plate also includes a built-in NATO rail, two integrated shoe mounts for additional mounting options. An Allen....
Check Stock

Tiltaing Camera Cage for BMPCC 6K Pro Basic Kit TA-T11-B-B Blackmagic Pocket Cinema Camera Rig (Basic Kit Black)

  • ...tached to the top of the cage via a cold shoe receiver and ¼”-20 screw. This provides an extremely secure connection to comfortably handle and operate your camera system..
  • The Top Handle features additional ¼”-20 threads, cold shoe receivers and a horizontal 15mm rod holder for mounting external monitors or EVFs..
  • [RECORD TO SSD] via the T7 Drive Holder and Mountable USB-C Cable.The SSD Drive Holder attaches directly to the Cage via a 1/4″-20 screw and locating pin. It can then clamp onto a T7 SSD drive, securing it to your camera setup and allowing you to record footage onto a separate SSD card. The included USB-C cable is able to screw into the SSD Holder and the Side Panel of the Cage near the USB-C Port..
  • [15MM ROD SUPPORT] When Using Battery Grip Extension Bracket.An included 15mm rod mount can be installed to support 15mm rods in front of the camera body when using the Battery Grip in the Half Cage setup..
Check Stock

Action Mount - Picatinny Rail Mount + Locking Smartphone Mount for Video Recording While Hunting or Target Practice Includes Allen Wrench + Thumbscrew Wrench Picatinny Rail

  • HEAVY DUTY PHONE CLAMP - This fully adjustable holder contains a spring loaded rubber lip so you can easily insert and remove your device with ease..
  • SPRING LOADED - clamp contains toggle switch on top so you can enact the spring loaded top lip of the mount. This enable you to easily insert and....
  • RAIL MOUNT - This CNC rail mount fits only standard rail designs, includes screw-pin tightening system to lock in place. This set includes an allen....
  • SPORT CAM COMPATIBLE- Use Rail Mount with Sport Camera. Also, this phone clamp can be inserted onto any action sports mounts that work with sport....
  • WHAT'S INCLUDED - High Quality adjustable phone clamp, quick clip, Picatinny Rail mount, allen wrench, 1 thumb screw, tightening wrench ($5.00 value)..
Check Stock

NICEYRIG Tablet Tripod Mount Handheld Video Holder Kit for iPad Mini 7.9/ Air 10.5 10.9/ Pro 11 12.9, Galaxy Tab S8/S7/S6 with 15mm Rod Handle Set, 12’’ 15mm Rod and Rail Block [Aluminum Alloy] - 511

  • Dual handheld support kit for vlog vlogging, livestreaming, video record and even Run-and-Gun steady shoot on tablet.
  • Features dual cold shoe extension bar on the top of the tablet holder for accessories like microphone, flash light.
  • furthermore, threaded 1/4’’, 3/8’’ & ARRI sufficient locating holes over the back side for DIY operation.
  • 131mm - 245mm wide range mounting clamp adopting drawer-type instead of spring-loading system, is convenient to adjust a desired height and secure via thumbscrew. Padding angled-gel on the mouth prevents the tablet from twisting and scratching.
  • 15mm rod rail grip set with unsmooth surface featuring lines increases friction and is more comfortable to hold. Built-in a 1/4’’-20 threaded hole on the end for your shoulder strap option.
  • Easy to assemble, connecting the tablet holder with the handles through 15mm rail block and 15mm rod. Quickly switch between hand-held shooting and Arca tripod shooting with built-in ARCA-Swiss bottom plate.
Check Stock

One Good Reason (A Boston Love Story Book 3)

  • Uses a clamp-on design that allows for easy relocation.
  • No drilling is required for installation.
  • The Rod Holder mounts on vertical or horizontal rails from 3/4 to 1 in diameter.
  • Features a 9 tube, clamp, and screws of stainless steel and a black plastic collar.
  • No big water trolling system is complete without a high-quality and rock steady rod holder.
  • Free your hands with these durable stainless steel Pisfun Rod Holders.
Check Stock