Reviews Rail Clamp Double

Athlon Optics Precision 34mm MSR Ring, Black (701007)

  • Double 1'' scope ring mount for Picatinny/ Weaver Rail (21mm)..
  • Design in hollowed-out configuration between the ring and the bottom of the base, to release heavy duty when clamping your scope..
  • Built-in tape inside per rings to prevent from marring the scope, also prevent sliding and holding postion accurately..
  • The ring is for most scopes which are in 1''/ 25.4mm scope tube. High profile, 0.98'' gap from base of mount to bottom of rings. ( Item height: 2.1'').
  • With only 1 rail clamp screw and 1 scope clamp screw per side, just twist off the nut and mount the base on the 20mm rail easily..
Check Stock

SMALLRIG Articulating Magic Arm with Screw Ballhead and NATO Clamp Ballhead, Monitor Mount for Field Monitor, Lights, Audio Recorders, DIY Camera Rig - 2071

  • ▶ NATO Clamp Ballhead: Attach cage with NATO rail with on the other end via ballhead with NATO clamp, while it could attach monitor cage on the other end via ballhead with 1/4’’ screw.
  • ▶ Quick Release & Adjust Angle: It features quick release and attachment and could be slid to get the balance of the whole kit.The monitor mounted on it could be adjusted in different positions and angles via both the ballhead and ballhead clamp.
  • ▶ Precision locking device: A single wingnut is applied to lock the double ballhead tight directly, and thumb screws on both ends are utilized to lock the devices manually and a spared hex spanner is ready to lock it tighter.
  • ▶ Extensive compatibility: The ballhead with 1/4″ screw thread can not only be connected to monitors, camera cages (such as gh5 cage rigs SMALLRIG 2049, SMALLRIG 2050, SMALLRIG 2051, SMALLRIG 2052), but also can be attached to monitor cages with NATO rail, such as Cage(5″) SMALLRIG 1726, SMALLRIG 2008,SMALLRIG Cage for Ninja Assassin 1788, SMALLRIG Monitor Cage 1834 or other products with nato rail.
  • ▶ What You Get: 1 x Ballhead with 1/4’’ Screw.
Check Stock

wipboten Optic Scope Rings Medium Profile Scope Mounts for Picatinny/Weaver Rail

  • Double scope ring mount for 11mm dovetail mounts..
  • One of the dovetail rings features a stop pin, for rock solid application..
  • High profile, 21mm(0.8 inch) from top of the dovetail rail to bottom of rings ( Item height: 1.9 inch)..
  • The scope ring is for most scopes which are in 1 inch/ 25.4mm scope tube..
  • With two rail clamp screws and four scope clamp screws, Precision and Repeatable Alignment..
Check Stock

EGW Picatinny Rail Scope Mount Savage Rascal

  • Double scope ring mount for 11mm dovetail rail, specialized scope mount for Airgun/.22 Rails..
  • Design in hollowed-out configuration between the ring and the bottom of the base, to release heavy duty when clamping your scope..
  • Lightweight: 1.15oz per ring. High profile, 20mm/0.79in gap from base of mount to bottom of rings. ( Item height: 1.97'').
  • The ring is for most scopes which are in 1''/ 25.4mm scope tube..
  • With only 1 rail clamp screw and 1 scope clamp screw per side, quick and easy to install. Precision and Repeatable Alignment..
Check Stock

Rail Riser Mount for Red Dot Sights, Optics and Accessories, Full Size Scope Riser Mount for Scopes

  • ☑ Double scope ring mount for Picatinny/ Weaver Rail (21mm)..
  • ☑ Design in see-through style, provide potential visibility for open sights, meanwhile hollowed-out configuration helps to release heavy duty when clamping your scope..
  • ☑ Built-in tape inside per rings to prevent from marring the scope, also prevent sliding and holding postion accurately..
  • ☑ The ring is for most scopes which are in 1''/ 25.4mm scope tube. Medium profile, 0.5'' gap from base of mount to bottom of ring. ( Item height: 1.9'').
  • ☑ With 1 rail clamp screw and 2 scope clamp screw per side, ensure mount any 1'' scope firmly, just twist off the nut and mount the base on the 20mm rail easily..
Check Stock

Modkin Scope Rings, Rifle Scope Mount High Profile Scope Mounts for Picatinny Rail (1 inch, Set of 2)

  • Double scope ring mount for Picatinny/ Weaver Rail (21mm)..
  • Design in hollowed-out configuration between the ring and the bottom of the base, to release heavy duty when clamping your scope..
  • Built-in tape inside per rings to prevent from marring the scope, also prevent sliding and holding postion accurately..
  • The ring is for most scopes which are in 1 inch / 25.4mm scope tube. High profile, 0.71 inch gap from base of mount to bottom of rings. ( Item height: 2 inch).
  • With 1 rail clamp screw and 2 scope clamp screw per side, ensure mount any 1 inch scope firmly, just twist off the nut and mount the base on the 21mm rail easily..
Check Stock

CVLIFE 1’’ Dovetail Scope Rings for 3/8’’ or 11mm Dovetail Rails, High Profile Scope Mounts, 2Pieces

  • ✔Double dovetail rings for 3/8’’ or 11mm dovetail mount specialized scope mount for .22/Airgun..
  • ✔ The dovetail ring is for most scopes which are in 1''/ 25.4mm scope tube..
  • ✔ High profile, 20.4mm(0.8 in) from top of the dovetail rail to bottom of rings ( Item height: 1.9'')..
  • ✔ Built-In Tape Inside Per Rings To Prevent From Marring The Scope, Also Prevent Sliding and Holding Postion Accurately..
  • ✔ With two rail clamp screws and two scope clamp screws, Precision and Repeatable Alignment..
Check Stock

Modkin 1'' Dovetail Scope Rings, Medium Profile Scope Mounts for 11mm Dovetail Rails - 2 Pieces (One has Stop pin)

  • ✔ Double dovetail rings for 11mm dovetail mount specialized scope mount for .22/Airgun..
  • ✔ One of the dovetail mounts features a stop pin, for rock solid application. Adopt anti-oxidation and anti-corrosion coating treatment..
  • ✔ Medium profile, 15mm(0.6 in) from top of the rail to bottom of scope rings ( Item height: 1.6'')..
  • ✔ The dovetail ring is for most scopes which are in 1''/ 25.4mm scope tube..
  • ✔ With two rail clamp screws and four scope clamp screws, Precision and Repeatable Alignment..
Check Stock

Monstrum Picatinny Rail Mount for Savage Accu-Trigger Model Rifles | Savage 10/11/12/14/16/110 | Short Action | 0 MOA

  • Double scope ring mount for 11mm dovetail rail, specialized scope mount for Airgun/.22 Rails..
  • Design in hollowed-out configuration between the ring and the bottom of the base, to release heavy duty when clamping your scope..
  • Lightweight: 1.15oz per ring. High profile, 20mm/0.79in gap from base of mount to bottom of rings. ( Item height: 1.97'').
  • The ring is for most scopes which are in 1''/ 25.4mm scope tube..
  • With only 1 rail clamp screw and 1 scope clamp screw per side, quick and easy to install. Precision and Repeatable Alignment..
Check Stock

Modkin 11mm Dovetail Scope Mounts for 1'' Scope Tube High Profile for Airguns or Premium .22 Rifles (Set of 2)

  • Double scope ring mount for 11mm dovetail rail, specialized scope mount for Airgun/.22 Rails..
  • Design in hollowed-out configuration between the ring and the bottom of the base, to release heavy duty when clamping your scope..
  • Lightweight: 1.15oz per ring. High profile, 20mm/0.79in gap from base of mount to bottom of rings. ( Item height: 1.97'').
  • The ring is for most scopes which are in 1''/ 25.4mm scope tube..
  • With only 1 rail clamp screw and 1 scope clamp screw per side, quick and easy to install. Precision and Repeatable Alignment..
Check Stock

Action Mount - Picatinny Rail Mount + Locking Smartphone Mount for Video Recording While Hunting or Target Practice Includes Allen Wrench + Thumbscrew Wrench Picatinny Rail

  • HEAVY DUTY PHONE CLAMP - This fully adjustable holder contains a spring loaded rubber lip so you can easily insert and remove your device with ease..
  • SPRING LOADED - clamp contains toggle switch on top so you can enact the spring loaded top lip of the mount. This enable you to easily insert and....
  • RAIL MOUNT - This CNC rail mount fits only standard rail designs, includes screw-pin tightening system to lock in place. This set includes an allen....
  • SPORT CAM COMPATIBLE- Use Rail Mount with Sport Camera. Also, this phone clamp can be inserted onto any action sports mounts that work with sport....
  • WHAT'S INCLUDED - High Quality adjustable phone clamp, quick clip, Picatinny Rail mount, allen wrench, 1 thumb screw, tightening wrench ($5.00 value)..
Check Stock

BESSEY KT5-2 2 spindle edge clamp for use with clamp rails up to 1/2

  • Economical spindle clamp mounts on the rail of bar clamps.
  • Allows bar clamps to also function as edge clamps.
  • Mounts on bar clamp rail stock up to 1/2 in. thick.
  • Fits any clamp rail up to 1/2 inch thick.
Check Stock

Grit Fluxx Pro Scooter Black/Black Green

  • SKILL LEVEL: Intermediate Rider, WEIGHT: 7.67 lbs.
  • DECK: 4" W x 18" L with Grit Skeletonized Down Tube Triple Channel 6061 Heat Treated Alloy and 3 degrees Concavity and Integrated Grind Rail.
  • COMPRESSION: Threaded, FORK/HEADSET: Threaded High Tensile Steel HIC Fork, CLAMP: 31.8mm Alloy Double Clamp.
  • BARS: 21.25" H x 18" W Reinforced Gusseted Riser Bars, GRIPS: Soft Feel Grips.
  • WHEELS: 100mm 85A PU Alloy Core 2 Color Wheels with ABEC 9 Bearings, BRAKE: Grit Flex Fender Brake with no rattle.
Check Stock