Reviews Radiator Cap Hose

MASTERCOOL 43301 27 Piece Master Radiator Pressure Test Kit

  • Detects and exposes external system leaks.
  • Detects internal engine leaks due to blown gaskets or cracked block.
  • Vacuum type cooling system, Purge and refill for quick change of coolant, Test Range: 0 - 35 psi, Includes 1 blue radiator cap test connector....
  • Includes 1 black radiator cap test connector R123/R124 Includes 1 thermometer, 1 universal radiator cap, 1 vacuum purge and refill tool, coolant hose....
  • Includes hand pump and 19 adapters (No. 's 2, 3, 4, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 20, 21) to fit most popular domestic and....
Check Stock

YSTOOL Radiator Pressure Tester Pneumatic Vacuum Type Purge Refill Kit Universal Automotive Cooling System Water Tank Leak Test and Coolant Fill Tool 28PCS Set with Adapters Gauge Black Case

  • Radiator pressure tester & coolant vacuum refill kit mainly includes 3 tools set, radiator leakage detector, coolant refill tool and thermometer. 17PCS specific adapters and 1PC universal cone rubber adapter, fit nearly any type of radiator openings on vehicles at home and abroad, helping detect and determine whether the water tank is leaking and fill the coolant under vacuum. There are also 3PCS radiator cap adapters and 2PCS connectors checking the radiator caps for leaks..
  • Radiator pressure tester is composed of 3" pressure gauge(0-35 psi.
  • 0-2.5 bar), aluminum cylinder pump and 21" long rubber hose. Manual radiator leak tester features fast pressure relief function and quick disconnect for convenience. Use the hand gauge tester pump tool to pressurize the radiator / cap and observe whether the pointer drops over time to confirm a system leak..
  • Vacuum coolant filler uses shop air to draw a vacuum, by using the connected coolant filling hose to extract new coolant and transfer it into the cooling system with no air pockets produced. Adding coolant in vacuum condition will not appear large cavitation, avoid engine warping and other damage. Coolant vacuum refill tool adopts superior brass manifold body with plastic cover, and 18" long rubber hose, brass....
Check Stock

YSTOOL Radiator Pressure Tester Coolant Vacuum Refill Kit 28PCS Automotive Cooling System Leak Test Pneumatic Water Tank Purge Fill Tool Set with Gauge Adapter Cap Universal for Auto Car Airlift

  • Three-in-one cooling system tool kit has 3 excellent functions: coolant pressure tester, coolant refilling & temperature measurement. Manual pump cooling system pressure tester can diagnose whether the radiator is leaking and help quickly bleed the waste coolant if needed. Pneumatic vacuum fill coolant tool vacuumizes to eliminate trapped air in minutes and refills cooling system with no air bubbles produced. Thermometer checks if the coolant temperature is too high. Fit for home & business.
  • 28PCS universal radiator tester pressure leak test set includes 17 color-coded radiator test adapter caps and a universal rubber cone adapter for almost all radiator openings on most vehicles at home and abroad. Another 3 radiator cap adapters and 2 connectors for radiator cap leak detection. All are well positioned in the case, complete in specifications and easy to assemble. Widely compatible with GM, BMW, VW, GMC, Porsche, Chevy, Dodge, JEEP, Chrysler and many other model car, truck & airlift.
  • Radiator manual pump pressure detector adopts premium aluminum cylinder and accurate shock-proof gauge design (3'' color-coded dial, 0-35PSI/ 0-2.5bar). Vacuum type coolant refiller takes reliable brass and plastic material. 21" & 18'' rubber hose with brass parts, anti-co....
Check Stock

48” Radiator Hose Flexible Stainless Steel Universal Coolant Water Hose Kit With 4Pcs Chrome Caps REENKEY (Silver)

  • Application: Radiator hose assemblies for 1-1/4", 1-1/2", 1-5/8"radiator neck (PLEASE CONFIRM THE O.D. OF THE NECK BEFORE PURCHASING, FEEL FREE TO CONTACT US IF YOU CAN NOT MAKE SURE.).
  • Material: Made of high quality stainless steel. The Coolant water hose assembly has good heat resistance and corrosion resistance. Importantly, it does not crack or rot as easily as rubber and has a long service life..
  • Easy to install: These Coolant Hose can be simply bent to form the desired shape, or cut to any length you want. Flexible design can help you avoid the trouble of finding a properly bent rubber hose..
  • Includes:Reenkey chrome stainless steel hose kit contains 1x stainless steel flex hose （48 in, 1.2'' I.D）. 4x rubber reducers（1-1/4'' I.D. FOR NECK ONLY), 4x rubber reducers, （1-1/2'' I.D. FOR NECK ONLY), 4x rubber reducers, 1-5/8" I.D.（FOR NECK AND HOSE), 4x end cap covers, 8x clamps..
  • Thoughtful Service: 100% new stainless steel flexible radiator condenser hose, WARRANTY PERIOD OF 1 year! If there are problems during the annua....
Check Stock

OTC Water Pump Holding Tool

  • Coolant pressure tester kit includes 3 tools set, radiator leakage detector, coolant refill tool and thermometer. 17PCS specific adapters and 1 universal cone rubber adapter, to connect almost all types of radiator openings on the domestic and imported vehicles, help to check the leak of water tank and fill the coolant under vacuum environment. There are also 3PCS radiator cap adapters and 2PCS connectors for testing the leakage of the radiator caps..
  • Manual vacuum pump pressure checker uses high quality aluminium cylinder, much harder than regular plastic one. 21" long rubber hose, brass parts, anti-corrosion and durability. 3" large dials with color coded small scale range 0-35PSI, very easy to observe. Use the hand pump tester to pressurize the radiator/cap and observe whether the pointer drops over time to confirm a system leak..
  • Cooling system coolant filling manifold tool adopts superior brass manifold body with plastic cover, and 18" long rubber hose, brass parts for anti-corrosion and durability. The pneumatic vacuum refiller firstly uses the workshop air to pump the cooling system and form a vacuum, and then pumps the coolant into the system. Add coolant under vacuum environment, there is no large cavitation, avoid engine warping and other dam....
Check Stock

LCGP 800ml Cooling Catch Bottle Aluminum Radiator Coolant Tank Black Overflow Oil Catch Tank for Universal Car

  • OVERFLOW OIL CATCH TANK: Improve the cooling efficiency of the water tank. Save the cooling systems of your car. And keep the engine within the operational temperatures to improves its performance..
  • MATERIAL&SIZE: The radiator coolant tank is made of high quality T6061 aluminum, and anodized polished. These make the radiator coolant tank more durable and anti-corrosive. And the volume of the cooling catch bottle is 800ml, height 8.27”, bottom diameter is 2.96”, the length of hose is 39.37”..
  • Application: Our coolant overflow tank bottle can fit for most vehicle. It’s used in the cooling system of your car to save the cooling system from rust. Also protects the necessary components from oil..
  • WORKING PRINCIPLE: When the engine works, the coolant in the radiator will sealed through the pressure cap and flows through the hose into our cooling catch bottle. And when the radiator cools, the coolant in the cooling catch bottle recycle back into the radiator..
  • INSTALL AND WARRANTY: Install the bottle in the car’s pipe, away from the heat source, connect the bottle to the radiator with a hose. We provide this overflow oil catch tank have 1-year warranty. Our customer service will try our best to help you..
Check Stock

ABN Coolant Funnel Kit Radiator Spill Free Funnel Auto Coolant Flush Kit No Spill Funnel Radiator Funnel Fill Kit

  • PERFORM TESTS & REFILL FLUIDS: The ABN | Cooling System Refiller Kit Coolant Burping Funnel Radiator Flush Kit prevents squeaky belts and spills when changing radiator coolant, flushing systems, vacuum filling, or replacing hoses.
  • Connects to radiator and seals for hands-free work so you can fill fluid level higher than radiator (allows for coolant expansion) to remove trapped air pockets or head gasket combustion leak bubbles that can otherwise cause cooling system errors and heater issues.
  • FITS YOUR VEHICLE: Antifreeze funnel kit works on any vehicle filled through the radiator (not the expansion tank).
  • The included straight extension and 45-degree elbows allow access to caps located under shrouds or in fender wells.
  • Works in any hard-to-reach area and can be combined to use on radiator caps that are placed at an angle.
  • BUILT TO LAST: 6.75-inch x 8.25-inch (17.1cm x 21cm) overall with 0.75-inch (1.9cm) outside diameter (OD) coolant fill funnel tip that securely fits the included adapters of different sizes.
  • While there are no measurement markings on the coolant spill free funnel, it can hold a maximum of approximately 70 ounces (2.1 L).
  • Constructed from opaque yellow hard-plastic components.
  • 3 out of 5 cap adaptors include steel rings to hold the ada....
Check Stock

FEXON Fan Clutch Nut Wrench Compatible with BMW E34 E46 E90 E39 E36 Clutch Removal Tool Kit Replaces 70074 Fan Clutch Wrench Set 32mm

  • ...ter in the tank will leak out under pressure, shows the fracture position, such as the tank, hose, a loose connection, etc. Check regularly, repair promptly, avoid leak result in the reduction of coolant and boiling point, cause high engine temperature, low oil viscosity and other serious problem.
  • Specification: The radiator pressure test tool uses aluminum pump cylinder rather than plastic one, 21.2" rubber nylon resin hoses, brass fittings, solid and durable. 3" large dial gauge with index range 0 to 35psi (0 to 2.5bar), easy to observe. Chrome plated brass quick coupler with relief valve, can be connected to radiator adapters easily and quickly..
  • Easy To Use: Remove the original radiator cap, choose an available radiator cap from the test kit and install it on radiator opening. Work the handpump till the pressure up to 10-15psi (Avoid up to 35psi). Check the gauge reading, if the reading drops automatically, it means that the leakage might occur in radiator. Please inspect the radiator system and repair it if necessary. Normally, it takes around 10mins to test leak, very easy and fast to operate..
  • Wide Application: Coolant system leak checker tool set is equipped with 12 specific aluminum adapters, solid and durable, widely compatible for Cadillac, B....
Check Stock

DASBET 18PCS Radiator Pressure Leakage Tester Tool Kit, Automotive Cooling System Water Tank Leak Test Detector Set with Hand Pump and Nylon Adapters

  • Hand Pump Leak Detector: The radiator pressure test tool uses aluminum pump cylinder rather than plastic one, 21.2" rubber nylon resin hoses, brass fittings, solid and durable. 3" large dial gauge with index range 0 to 35psi (0 to 2.5bar), easy to observe. Chrome plated brass quick coupler with relief valve, can be connected to radiator adapters easily and quickly..
  • Leak Detection Tool: The hand pump leak detection tool pressurize on the reservoir, and watch for pointer drop over time to confirm system leak down. If there is any crack in the cooling system, the water in the tank will leak out under pressure, shows the fracture position, such as the tank, hose, a loose connection, etc. Check regularly, repair promptly, avoid leak result in the reduction of coolant and boiling point, cause high engine temperature, low oil viscosity and other serious problem.
  • Easy To Use: Remove the original radiator cap, choose an available radiator cap from the test kit and install it on radiator opening. Work the handpump till the pressure up to 10-15psi (Avoid up to 35psi). Check the gauge reading, if the reading drops automatically, it means that the leakage might o....
Check Stock

Dorman 902-5135 Engine Coolant Thermostat Housing Assembly Compatible with Select BMW Models

  • Direct bolt-in replacement to stock, cracked or discolored tanks Fabricated Aluminum for strength, factory tanks fail after repeated high heat situations No cutting of factory hoses is required and accepts the factory clip-on hose Included is a Moroso Part No. 63324 racing radiator cap that operates in the same pressure range as the factory cap The Moroso radiator cap mounts to a billet aluminum neck that will not strip out like plastic threaded necks Easy to read slight level is included This Aluminum tank can be polished, chromed, painted, powder coated or left as is for a race look..
Check Stock

Motcoda Flexible Hose Clamp Pliers Tool 24\ Long Reach Locking Clamp Plier For Automotive Radiator Fuel Water 18mm-54mm Hose Clamps

  • ...n easy-to-operate long-distance remote pliers, remote hose pliers, cable hose clamp pliers.
  • 【Flex pliers with locking function】This flexible pliers, has a ratchet locking mechanism, this locking mechanism keeps the engine hose pliers in the open size position, and holds the cable hose clamp pliers in place, this radiator clamp remover is one-handed Can be operated.
  • is a cooler clamp pliers, radiator hose spring clamp pliers that help you to remove and install easily.
  • 【Widely used long reach clamp pliers】This flexible hose clamp tool can loosen hose clamps on cars, remove factory spring hose clamps, factory GM clamps, machine coolant or radiator hoses.
  • let this flexible hose clamp clamp plyers, can be your radiator hose clamp removal tool, cable clamp plier, heater hose clamp pliers, brake hose clamp pliers, remote hose clamp pliers.
  • 【Multi-Compatible with spring clamp tool】This radiator hose clamp pliers has a maximum opening of 1-1/2" and a long distance of 2 feet.
  • spring loaded hose clamp pliers have a removal diameter of 11/16" - 2-1/2" (18mm - 54 mm) plastic and/or metal self-tightening hose clamps.
  • a single hose clamp remover pliers becomes a versatile spring clamp removal tool.
  • 【Easy radiator clamp tool】This radiator hose clamp tool....
Check Stock

JIFETOR Radiator Coolant Pressure Tester Vacuum Refill Tool Kit, 28PCS Automotive Cooling System Leak Test and Pneumatic Purge Fill Set with Testing Adapter Caps Universal for Airlift Car Auto Truck

  • MULTIFUNCTION: JIFETOR all in one comprehensive coolant pressure tester fill kit includes leak detection, temperature measurement and coolant filling functions. Radiator pressure tester pressurize on the reservoir/cap, and watch for pointer drop over time to confirm system leak down. Coolant vacuum refill tool uses vacuum pump to extract air and form a vacuum to draw coolant into the cooling system. Add coolant in vacuum, there is no large air pocket and avoid warping or other damage in engine..
  • WIDE USAGE: Cooling system pressure tester and coolant bleeder kit is equipped with 17 specific adapters and 1 universal tapered rubber adapter, suits for almost all types of radiator openings on classic and modern vehicles. Included 3 radiator cap test adapters and 2 connectors help to diagnose the leakage of radiator caps on most cars. All these adapters are color coded and placed exclusively, can be easily selected according to the marked pictures in instruction, convenient and no confusion..
  • COOLING SYSTEM VACUUM FILL TOOL: Plastic covered premium brass manifold body, equipped with brass fittings, anti-corrosion and durable. The index range of gauge is -30 to 0inHg (-76 to 0cmHg), and normally -25 to -20inHg is right time to add coolant. 18" rubber resin ma....
Check Stock

Kauplus Radiator and Cap Test Kit Cooling System Pressure Test Kit Radiator and Pressure Cap Test kit Coolant Pressure Tester

  • For testing the leakage in radiator system on a variety domestic/import vehicles.
  • Hand pump and tester head with 12 In. hose and gauge reads pressure in pounds per square inch.
  • 2 popular radiator adapters (32 mm ID cap systems in both the 9.5 mm and the 15 mm depths) and 1 stand cooling cap adapter.
  • Cap has a rotating lever for fine pressure adjustment and safe pressure release.
  • Tests automotive pressurized cooling systems up to 30 PSI.
Check Stock