Reviews Rack Mount Hard Drive Bay

StarTech.com 4 Bay 3.5 SATA SAS Backplane - 3 x 5.25in Bays - Trayless Mobile Rack - SATA Backplane - Removable Hard Drive Bay - HDD Rack HSB43SATSASB

  • Hot swap up to four 3.5" SATA or SAS hard drives using three 5.25" bays.
  • 4 Bay 3.5" SATA SAS Backplane with trayless design.
  • Hot Swap Mobile Rack for three 5.25" bays, supports SAS I/II and SATA I/II/III (up to 6Gbps).
  • 4 bay mobile rack with durable plastic and aluminum construction provides a cost-effective solution for drive maintenance and hot swapping drives....
  • 2 fans and venting to optimize heat dissipation / HDD Rack/ SAS Backplane/ SATA Backplane / hard drive tray / 4-bay SAS/SATA backplane / Hard drive....
Check Stock

PASOW 2.5'' 3.5'' to 5.25'' SSD HDD Mounting Bracket Internal Hard Disk Drive Bays Holder Adapter for PC

  • You can use it for 2 drives,2.5" SSD and 3.5" HDD.Allow to mount a 3.5 inch drive and a 2.5 inch drive (or a 8cm fan) to a 5.25 inch drive bay in your computer case at the same time..
  • Converts an available 5.25" HDD bay drive to accommodate 3.5" HDD or 2.5'' SSD (Solid State Drive)..
  • Compatible with any 2.5 or 3.5 inch IDE,SATA or SAS Hard Drive and Solid State Disk..
  • Mounting the 2.5'' drive firstly when you mount 3.5'' drive and 2.5'' drive at the same time,you can mount 8cm fan at the back if not mount 2.5'' hard disk..
  • Made of plastic body,quick and easy installation.
Check Stock

StarTech.com 2.5 SATA Drive Hot Swap Bay - for 3.5” Front Bay - Anti-Vibration - Front Mount Design - Hard Drive Caddy - Hard Drive Rack SATBP125VP

  • Hot swap drives in the front bay of your computer or server and safeguard your data with anti-vibration protection.
  • 2.5 SATA Drive Hot Swap Bay for 3.5" Bay.
  • 2.5in SATA SSD/HDD Hard Drive Rack with durable aluminum construction and Venting to optimize heat dissipation.
  • Four anti-vibration bumpers provide vibration protection to safeguard your data.
  • Supports one 2.5” SATA SSD/HDD with drive heights from 5-15 mm / Mobile Rack w/Lockable Drive Door / SATA hot swap / Hard drive caddy/ HDD caddy /....
Check Stock

WORKDONE 12-Pack - 3.5\ Hard Drive Caddy - Compatible for Dell PowerEdge Selected 14-15th Gen. Servers - with Detailed Setup Manual - Front Sticker Labels - Screwdriver - Strong Tray Screws

  • README FIRST: The same PowerEdge server type can have two different sizes of the drive bay.  Your server HAS TO HAVE 3.5 inches Hot-Plug Drive Bay. This 3.5 inch Drive caddy supports ONLY 3.5-inch hard drives. Check that your PowerEdge Server or Drive Array is LISTED and supported..
  • SUPPORTED 3.5 inch MODELS PowerEdge 15th Generation: R250, T350, R450, T550, R550, R650, R650xs, R750, R750xs, R6515, R6525, R7515, R7525, C6520 enclosure.
  • PowerEdge 14th Generation: R240, R340, R440, R540, R640, R740, R740xd, R740xd2, R6415, R7415, R7425, XC Series appliances XC640-10, XC740xd-12 and C6420/25 enclosure, Precision 3930 Rack and 7920 Rack. Supported ONLY Hot-Plug 3.5-inch Drive Bay models. NOT compatible when your server has a 2.5-inch drive bay.
  • WORKDONE BRIGHT LED: This innovation make hard drive indicator lights brighter. The PowerEdge server backplane has activity LEDs and LED signal lights are transferred special plastic rail to the front of drive caddy. Indicator lights tell important status from the hard drive. Hard drive activity indicator green and hard drive status indicator - green and amber are now cleaner and brighter. (compared typical aftermarket products - green light in the pictures are just an illustration).
Check Stock

WorkDone 3.5 inch Drive Caddy with 2.5 inch HDD Adapter - Compatible for Dell PowerEdge Servers - R740 R640 R540 R440 R340 R550 R450 R650xs R750xs - Bright LED Tray - with Detailed Setup Manual

  • README FIRST: The same PowerEdge server type can have two different sizes of the drive bay.  Your server HAS TO HAVE 3.5 inches Hot-Plug Drive Bay. This 3.5 inch Drive caddy supports 3.5-inch hard drives and with a 2.5-inch converter also 2.5-inch hard drives. Check that your PowerEdge Server or Drive Array is LISTED and supported. .
  • SUPPORTED 3.5 inch MODELS PowerEdge 15th Generation: R250, T350, R450, T550, R550, R650, R650xs, R750, R750xs, R6515, R6525, R7515, R7525, C6520 enclosure.
  • PowerEdge 14th Generation: R240, R340, R440, R540, R640, R740, R740xd, R740xd2, R6415, R7415, R7425, XC Series appliances XC640-10, XC740xd-12 and C6420/25 enclosure, Precision 3930 Rack and 7920 Rack. Supported ONLY Hot-Plug 3.5-inch Drive Bay models. NOT compatible when your server has a 2.5-inch drive bay.
  • WORKDONE BRIGHT LED: This innovation make hard drive indicator lights brighter. The server backplane has activity LEDs and LED signal lights are transferred special plastic rail to the front of drive caddy. Indicator lights tell important status from the hard drive. Hard drive activity indicator green and hard drive status indicator - green and amber are now cleaner and brighter. (compared typical aftermarket products - green light in the pictures are just a....
Check Stock

Alloy Steel Hard Drive Cage,Steel Plate Cage Hard Drive Tray Rack with Fan Space,Adapter Rack Bracket SATA 5.25\ to 5X 3.5 Rack PC Supplies for Computer SAS

  • It fits for PC Case which CD-ROM Slot Inwall is flat, or Bracket Installation Type CD-ROM Slot, Some PC case special design may not support this Hard Drive Rack, then you can only DIY your PC Case or use it External, please note before buying.
  • Heat Dissipation:With 1x 12cm cooling fan Install slot space.Can help heat dissipation and would not easily get out of shape, protecting your hard disk effectively.
  • Perfectly fitting with the optical drive bay, accurately locating the site of case, hard drive and screw hole, easily expanding storage capacity..
  • Holding 5x 3.5 With Cooling Fan Install Lock space. Hard Drive Cage Drawer Rack Bracket.
  • Package included: (Fan and Hard Drive are not included) 1 set x HDD Hard Drive Cage Rack..
Check Stock

{2PCS Pack}3.5 inch Hard Drive Caddy X7K8W Compatible for Dell PowerEdge Servers 14th Gen R240 R340 R440 R540 R640 R740 R740xd2 R6415 R7425

  • {2pcs pack} 3.5 inch Hard Drive Caddy X7K8W 07K8W.
  • COMPATIBILITY: This hard drive caddy works ONLY with the latest 14th Generation PowerEdge and XC Series appliances. Supported Hot-Plug 3.5-inch Drive Bay models R240, R340, R440, R540, R640, R740, R740xd, R740xd2, R6415, R7415, R7425.
  • XC Series appliances XC640-10, XC740xd-12 and C6420 Enclosure. Precision 3930 and 7920 Rack. NOT compatible when your server has 2.5-inch drive bay or non-Hot-Plug type Drive Bay.
  • This hard drive caddy size(L x W x H)6.8x4.1x1.0 inches.
  • You will receive:2pcs HDD tray caddy,8pcs Mounting Screws,and 1pcs tool.
Check Stock

Seaocloud 5.25 Trayless Mobile Rack CD-ROM 3.5 inch Internal SATA Hard Drive Adapter

  • Fits 3.5 inch SATA hard drives in a front-accessible 5.25 inch PC drive bay without capacity limitations.
  • Tool-free mounting process, just lock your 3.5" hard drive in, mount in your 5.25" CD/DVD drive bay, and connect through SATA interface..
Check Stock

Syba 5.25' Bay Adapter for Slim Optical Drive, 2.5' Trayless Rack for Hard Drives HDD SSD, USB Hub - SY-MRA55005

  • Mount a slim Optical Drive into a single 5.25" bay.
  • Able to support 12.7mm Slim Optical drive.
  • Patent NSS Connector - Trouble Free 50000 Cycles Hot Swaps.
  • Built-in USB 3.0 19-pin Header Cable for the front two USB 3.0 Ports.
Check Stock

SABRENT 2.5 Inch to 3.5 Inch Internal Hard Disk Drive Mounting Bracket Kit (BK-HDDH)

  • Convert any 2 2.5" Hardrive into a 3.5" drive bay.
  • Compatible with all types of 2.5" hard drive. Including SSD DRIVES!!!.
Check Stock

SABRENT 2.5 Inch to 3.5 Inch Internal Hard Disk Drive Mounting Bracket Kit (BK-HDDF)

  • Convert any 2 2.5" Hardrive into a 3.5" drive bay.
  • Compatible with all types of 2.5" hard drive. Including SSD DRIVES!!!.
Check Stock

StarTech.com Black Aluminum 5.25in Professional SATA Hard Drive Mobile Rack Drawer (DRW115SATBK)

  • Maximize performance, with file transfer speeds up to 6Gbps when paired with SATA III HDD and controller.
  • Mobile rack system makes removing/replacing drives quick and safe, while a key lock prevents unauthorized access to the drive.
  • Rubber shock absorbers, and solid aluminum construction ensure the drive is protected both inside and outside the computer system.
  • Fits a single SATA drive into a front accessible 5.25″ bay.
  • Heavy duty aluminum construction for the drive caddy and bay.
  • Backed by a StarTech.com 1 year warranty and free lifetime technical support.
Check Stock

WorkDone 4-Pack - 3.5 inch Hard Drive Caddy - Compatible for Listed Dell PowerEdge Servers - with Detailed Installation Manual - Sled Front Sticker Labels - Screwdriver- Added Tray Screws

  • SUPPORTED 3.5 inch MODELS: PowerEdge 14th Generation R240, R340, R440, R540, R640, R740, R740xd, R740xd2, R6415, R6515 R6525, R7415, R7425, R7515, R7525.
  • XC Series appliances XC640-10, XC740xd-12 and C6420 Enclosure, Precision 3930 Rack and 7920 Rack..
  • README FIRST: Check that your PowerEdge Server or Drive Array is LISTED and supported. Your Dell server has to have 3.5 inches Hot-Plug Drive Bay. This 3.5 inch Drive caddy supports ONLY 3.5-inch hard drives. Please, contact us if you are not sure..
  • WORKDONE BRIGHT LED: This new innovation makes hard drive indicator lights brighter. The server backplane has activity LEDs and LED signal lights are transferred special plastic rail to the front of drive caddy. Indicator lights tell important status from the hard drive. Hard drive activity indicator green and hard drive status indicator – green and amber are now cleaner and brighter. (compared typical aftermarket products – green light in the pictures are just an illustration).
  • 4-YEAR PRODUCT WARRANTY: Try them out for yourself, install to your server, and if you aren’t happy with the compatibility, or for any reason at all, then we’ll be more than happy to give you an immediate refund. NON-OEM/NON-ORIGINAL ACCESSORY PART.
Check Stock