Reviews Rack Cable Arm

Swagman XC Cross-Country 2-Bike Hitch Mount Rack (1/1/4 and 2-Inch Receiver)

  • Carries up to 2 bikes. Fat tire wheel trays sold separately (64674). Locking hitch pin 1/2 inch and 10mm security cable sold separately (64031).
  • Center arm folds down to allow access to the rear-of-vehicle without removing the rack.
  • Upright ratcheting arms easily adjust to different bike frame sizes.
  • Transports up to 2 bikes, compatible with 1 1/4″ and 2″ receiver hitch also has a built in anti woble hitch device. Takes only a few minutes to assemble. | Max Load 35lbs per bike.
  • Upright ratchet arms easily adjust to different bike frame sizes, will accommodate bike frames up to 59 cm..
  • Center arm folds down to allow access to the rear of the vehicle without removing the rack..
  • Fat tire wheel trays sold separately (64674). Locking hitch pin 1/2 inch and 10mm security cable sold separately (64031).
Check Stock

Saris Bike Lock Cable, 8 Feet, Black

  • Trunk mounted rack carries up to two bikes, of up to 35 pounds each.
  • Ratcheting hold downs are easy to adjust.
  • Secure bikes to your bike rack to reduce bike theft..
  • Eight foot, 10mm braided stainless steel locking cable..
Check Stock

Thule T2 Pro XT 2 Bike Add-on (2' Only)

  • 2 bike add-on that attaches to the Thule T2 Pro XT or XTR 2" bike carrier (sold separately) so that you can carry a total of 4 bikes.
  • Hitchswitch lever easily tilts rack up when not in use or down for rear of vehicle access.
  • Frame free ratcheting arm secures bikes quickly without frame contact.
  • Fits 20 - 29" wheels and up to 5" tires without adapters making it ideal for carbon frames, mountain, Downhill, or fat bikes.
  • Integrated cable lock and lock knob locks bikes to the rack and secures the rack to the receiver.
  • Do not install on a trailer or other towed vehicle.
  • Not intended for use with recumbents or bikes with extensive fenders..
Check Stock

NNI FITNESS 2020 Commercial Smith Machine - Black

  • Preacher Curl (Optional on Bench Attachment).
  • Leg Extension / Leg Curl (Optional on Bench Attachment).
  • J Hooks (Extends 4.5" From Cable Columns).
  • Bar Catches (Extends 16" From Cable Columns - Included in the Depth measurement of 65).
  • Lat Pull Knee Cushion (latches on to support you at the knees for lat pull downs).
  • Jammer Arms (Connects to Cable Columns to perform various arm / leg workouts).
  • Weight Stack Increments: 11 lbs (20) 11 lb Plates per side (Feels like 5.5 lb increments due to 2:1 ratio).
  • Dimensions: 87 3/8"h x 88 1/8"W x 65"D (65" Depth is w/Bar Catches connected).
  • Dimensions w/Jammer Arms Fully Extended" 101.5" (Jammer Arms extend 56.5" from Cable Columns).
Check Stock

DR4-TB-BK2 1U Rackmount Lockable Industrial Keyboard with Integrated Trackball Mouse (USB) and Adjustable Depth Rear Mount Bracket Supporting 4 Post and 2 Post Relay Rack

  • Fully QWERTY 82 Key Layout in compact 14" form factor with integrated Trackball mouse (USB).
  • Constructed with 16 Gauge Steel for Industrial use..
  • Lockable Keyboard drawer with 2 keys with Integrated cable arm keeps keyboard cable clear from sliding rail..
  • Including Adjustable depth rear mount brackets supporting depth from 15" to 19" and 19" to 31" for 4 Post Server Rack.
  • Including center mount brackets for 2 Post relay rack. Made in USA.
Check Stock

DR4-PAD-BK2 1U Rackmount Lockable Industrial Keyboard with Touch Pad Mouse USB Version and Adjustable Depth Rear Mount Bracket Supporting Cabinet Depth from 15 inch to 31 inch

  • Fully QWERTY 82 Key Layout in compact 14" form factor with integrated Touch Pad mouse USB version.
  • Constructed with 16 Gauge Steel for Industrial use..
  • Lockable Keyboard drawer with 2 keys with Integrated cable arm keeps keyboard cable clear from sliding rail..
  • Including Adjustable depth rear mount brackets supporting depth from 15" to 19" and 19" to 31" for 4 Post Server Rack.
  • Including center mount brackets for 2 Post relay rack. Made in USA.
Check Stock

AmScope ASC Articulating Stand with Clamp for Stereo Microscopes

  • This is an articulating arm with a O-ring focusing rack with 3" diameter, and clamp for stereo microscopes..
Check Stock

Lat Bar Cable Machine Attachment Curl Pulldown Bar Barbell Revolving Bar, Multi-Exerciser Cable Attachment Bar, Solid Steel Tricep Press Down Bar with Rubber Handgrips & Revolving Hanger(M)

  • The YUHQC Lat Pull Down bar is great compatible with functional trainer, home gym pulley system, cable machine, cable crossover rowing machine, weight machine, lat pull down machine, squat rack with lat pulldown, cable machine and more. Ideal for performing pull-down actions exercise the lower side of the latissimus dorsi, Arm and waist back muscles..
  • Constructed with high-strength, solid stainless steel with polished chrome coating, features rotating and swiveling center for more sports..
  • Revolving Hanger & Rubber Handgrips, Use environment friendly textured rubber to provide ergonomic and firm grip during your regular routine, as well as to increase comfort and safety..
  • Package Sides & Package Dimensions: M (15 x 6 x 6.5 inch , weighs 6 lbs), included one carabiner. Perfect dimension provides comfort during your workout, fit well in your palm.
  • This LAT Bar attachment is ideal for developing a variety of arm muscles..
Check Stock

HPE 734811-B21 Standard Cable Management Arm

  • Designed For: HP Large Form Factor Easy Install Rail Kit, Small Form Factor Easy Install Rail Kit.
Check Stock

Synology Cable Management Arm CMA-01

  • Synology Cable Management Arm CMA-01 allows you to organize data and power cables, optimize rack cabinet space, and enable proper access to the rear of the system.
  • It can be easily attached to compatible Synology rail kits (RKS-02).
Check Stock

Lat Bar Cable Machine Attachment Curl Pulldown Bar Barbell Revolving Bar, Multi-Exerciser Cable Attachment Bar, Solid Steel Tricep Press Down Bar with Rubber Handgrips & Revolving Hanger(30 Inch)

  • The YUHQC Lat Pull Down bar is great compatible with functional trainer, home gym pulley system, cable machine, cable crossover rowing machine, weight machine, lat pull down machine, squat rack with lat pulldown, cable machine and more. Ideal for performing pull-down actions exercise the lower side of the latissimus dorsi, Arm and waist back muscles..
  • Constructed with high-strength, solid stainless steel with polished chrome coating, features rotating and swiveling center for more sports..
  • Revolving Hanger & Rubber Handgrips, Use environment friendly textured rubber to provide ergonomic and firm grip during your regular routine, as well as to increase comfort and safety..
  • Package Sides & Package Dimensions: 30 Inch(29.5 x 4.6 x 2.2 inch , weighs 8 lbs), included one carabiner. Perfect dimension provides comfort during your workout, fit well in your palm.
  • This LAT Bar attachment is ideal for developing a variety of arm muscles..
Check Stock

Roland INTEGRA-7 SuperNATURAL Sound Module, 1-Inch

  • This bundle includes: Roland 30 inch Cymbal Arm w Ball Joint, stopper, felt washer and nut, 1.5 inch Rack Clamp and Silverline Audio 10ft Connection Cable.
  • Perfect for replacing an original Roland part or adding a cymbal to your kit.
  • Ball and socket design allows for superior adjustment of your cymbal's position.
  • Also compatible with most Alesis, Yamaha and Simmons sets.
Check Stock

AIYoo Swivel Towel Bar 15 inch Wall-Mounted SUS 304 Stainless Steel 4-Arm Bathroom Swing Hanger Towel Rack Holder Storage Organizer Space Saving, Brushed Chrome

  • 304 STAINLESS STEEL BATH TOWEL BAR - The swivel towel bar construted of Type 304 premium grade stainless steel ,Brushed with Chromium and Nickel ,to protect against corrosion and rust ,ensuring the quality and longevity.
  • 180 DEGREES SWING TOWELS RACK - This amazing swing arm towel rack features 4 folding arms that can rotate 180°, support multiple use all purpose storage organizer towel rack ,allowing you to hang your wet and dry towels simultaneously, without them touching one another.
  • LARGE SIZE AND SPACE-SAVING SWIVEL TOWEL BAR - The stainless steel towel bar ARM is 15” long and total 9.2” tall, ensuring that it can store even your biggest towels,Wall-Mounted towel rack ,Never take up more precious wall space.
  • EASY TO INSTALLATION THE SWING ARM TOWEL BAR - Installing this swivel towel rack will not take you more than 5 minutes ,Can be easily mounted on any wall using the included installation hardware, no assembly is required , It is so easy that you can definitely do it yourself.
  • FASHION CONVENIENT BATHROOM HARDWARE - Concealed screws, beautiful and elegant look folding swing arm towel rack,One piece, no assembly required.Clean, light, convenient ,Suitable for bathroom , Kitchen ,office, living room.
Check Stock