Reviews Rack Bolt Lock

EDOSTORY Tray Hitch Mount Bike Rack,Foldable 2 Dark Black Bicycle Rack fit for Cars, Trucks, SUV and Sedan with 1.25\ and 2\ Hitch Receiver-Hitch Stabilizer

  • [EASY TO INSTALL]:Our bike rack only takes a few minutes to assemble.There is two version manual in the package,please follow "Tray Hitch Mount Bike Rack With Hitch Stabilizer Version Manual". This bike rack fit for 1.25'' and 2” hitches. Note: Not compatible with RVs, trailers, or any kind of Class B vehicles Optional hitch extender needed for cars with spare tires..
  • [Htich Stabilizer]:install correctly and it can stop rattling, wobbling, rocking and significantly reducing noise.Easy to install, after insert the tube, lock them directly by U-bolt and plate, put on original spring washers, flat washers and fasten by nuts, then done. If the hitch is low, and there is a risk for U-Bolt to scrap ground, lock the tightener from the bottom.Follow the picture to install it and also can be mounted from the bottom..
  • [GOOD LOADING CAPACITY]:Heavy duty all steel construction bike rack will easily transport up to 2 bicycles.max load to 120LB.Hooks and tire cradles adjust to fit most bikes frames with 20" to 30" wheel sizes.The tire cradle is only suitable for bikes whose tire width does not exceed 4 inches(10cm)..
  • [DURABLE CONSTRUCTION]:durable and long-lasting all steel construction with protective powder paint finish.
  • [CUSTOMER SATISFACTION]: All of our bicycle....
Check Stock

VEVOR Rack Ratchet (2\ OD Round Pipe)

  • Effortless Installation: The ladder rack ratchet can be either bolted or welded. It is complete with bolt mounting hardwaret. 2 Inches OD round pipe steel..
  • Thoughtful Design: The rubber pad reduces friction between the machine and the ladder rack ratchet strap, which reduces damage to the machine surface. Widen the diameter of the handwheel to save more effort, tighten forward and lock backward..
  • Ratchet Tie Down: The rack ratchet with strap adopts a smooth ratchet structure, which is used for one-way drive and is commonly used in manual winches to prevent reversal. The ladder rack ratchet is made of alloy steel with a 1,000 lbs capacity for high durability..
  • 9" Polyester Strap: The ladder rack tie-down straps are equipped with an extended ribbon to increase cargo the loading range of cargo volume. The length of the strap is similar to that of the same product. Strap length: 9 ft / 274 cm..
  • Wide Application: Ladder tie-down straps are used for ladder racks and truck racks. Perfect for tying down cargo and lumber. The frame can be welded or bolted onto the rack. It is suitable for a variety of mounting styles, ideal for almost any rack..
Check Stock

Universal Roof Box U-Bolt Clamps Cargo Carrier Roof Rack Bracket Kit Van Mounting Fitting Kit 85mm Internal Width 40mm Thick Luggage Rack Adjustable U Bolt Quick Release Latch for Roof Box Hardware

  • UNIVERSAL FIT - Universal roof box u-bolt clamps fit for car crossbars within 80mm, can accommodate luggage racks up to 40mm/1.57 inches thick, widely used in hatchbacks, sedans, SUVs, off-road vehicles, etc. NOTICE: Not fit for THULE Roof Box.
  • SIZE: Inner width 83mm/3.27 inches, outer width 90mm/3.54 inches, screw diameter 7mm/0.27 inches, 40mm/1.57 inches thick.
  • NOT EASILY DEFORMED - Roof rack mount u-bolt clamps has a rubber gasket and a plastic back plate, which can protect your car from scratches to the greatest extent, and can increase friction, which has a high hardness, good confinement effect, strong bearing capacity.
  • GALVANIZED STEEL MATERIAL - Universal roof box u-bolt clamps using galvanized steel material, durable, alkali resistance, and has a clear thread, uniform force and not easy to slip to improve overall stability.
  • PACKAGE INCLUDED - Roof box rack mounting fitting U-Bolt clamp kits included 4pcs galvanized U bolts, 4pcs plastic backplane, 4pcs rubber gasket, 8pcs heavy lock nuts, 2pcs strap.
Check Stock

T Slot Bolts for Thule Yakima Roof Rack Cross Bars Platform Cargo Basket Stainless M6 / M8 x 30mm/35mm/65mm Square T Track Bolt Adapter to Secure Bike/Ski/Kayak Rack Solar Panel Awning

  • Versatile t Track Bolts - this t-track adapter accessory kit is a great solution to attach items firmly to your t track crossbar, compatible with Thule, Yakima, Whispbar cross bar with t slot, perfect t-track adapter accessory kit to attach bike rack / ski rack / kayak rack, roof rack awning, solar panel, fishing rod holder, cargo box to roof rack cross bars, roof rack cargo basket, car rooftop platform or side rails, works well with most solar panel mounting brackets.
  • Technical Specification - the t bolt is made of 304 solid stainless steel, 79 in x 0.79 in x 0.16 in (20mm x 20mm x 4mm) square head base, m6 / m8 threading, 30m / 35mm / 65mm length.
  • Easy to Set Up - no drilling, cleaner look, just need to slide it into the t slot of your roof bar, and won't scratch your cross bar, great alternative to roof rack t track clamp*NOTE-please check the dimension of your cross bar rail, this t bolts base is 20mm x 20mm x 4mm (L x W x Thickness)*.
  • Marine Resistant - stamping t slot accessories, more durable compared with welding parts, made of solid 304 stainless steel, it features rust resistant and corrosion resistant even in salt water, designed for most harsh environment, perfect t track accessories for suv / rv roof top.
Check Stock

ZQULOYO 4 PCS Universal Stainless Steel Roof Box U-Bolt Clamps Rooftop Cargo Carrier Rack Bolts Car Van mounting Accessories U-Bracket Clips with 8 Lock Nuts 2 Strap Kit for Most Cars

  • 【FITMENT】This roof box u bolt clamps is suitable for most cars on the market, can be used for up 85mm(3.34 inch) width and 40mm(1.57 inch) thick luggage rack..
  • 【HIGH-QUALITY MATERIAL】u-bolt clamps using galvanized steel material, durable, good alkali resistance, acid resistance, corrosion resistance, strong temperature resistance..
  • 【FEATURE】This product has a rubber gasket and a plastic back plate，which can protect your car from scratches to the greatest extent, and can increase friction to improve overall stability..
  • 【EASY TO INSTALL】: No need to drill and install directly. Accurate mounting size and long-enough bandages, suit your roof box and daily opening and closing box..
  • 【PACKAGE INCLUDED】 Roof box rack mounting fitting U-Bolt clamp kits included 4pcs galvanized U bolts, 4pcs plastic backplane, 4pcs rubber gasket, 8pcs heavy lock nuts, 2 bandages，1 Hole Sealing Sticker..
Check Stock

Bayou Classic 700-186 Accessory Fryer Basket, Fits 2-1/2 and 4-Gallon Bayou Fryer

  • Vented Lid prevents vapor lock when boiling.
  • Heavy-Duty Welded Handles for secure handling of stockpot.
  • Perforated Poultry Rack designed to create a circular flow of oil through & around the cavity during frying.
  • 12-in Stainless Fry Thermometer enables you to monitor optimal frying temperature.
  • 2-oz Seasoning Injector is ideal for infusing your favorite seasonings into the turkey prior to cooking.
  • 44-qt Stainless Stockpot with Vented Lid.
  • 14-in Tall Stainless Cooker Frame with single bolt leg attachment.
Check Stock

uxcell M8x25mm T-Slot Drop-in Stud Sliding Bolt Screw Carbon Steel for 40 Series Aluminum Profile 8pcs

  • Head Size: 10 x 6 x 3mm/0.39" x 0.24" x 0.1"(L*W*T).
  • Advantage: Carbon steel T screw bolt screws nuts surface chrome finish, quenching and tempering heat treatment, not easy corrosion, and high-hardness..
  • Application: Used widely for aluminum alloy, rack assembly and clamping lock, used with T-nuts, good fastening effect..
  • Notice: When purchasing, please confirm the size of your aluminum profile or T-groove to ensure that it matches the size of our T-bolt..
Check Stock

uxcell M8x25mm T-Slot Drop-in Stud Sliding Bolt Screw Carbon Steel for 40 Series Aluminum Profile 10pcs

  • Head Size: 18 x 8 x 5mm/0.71" x 0.31" x 0.2"(L*W*T).
  • Advantage: Carbon steel T screw bolt screws nuts surface chrome finish, quenching and tempering heat treatment, not easy corrosion, and high-hardness..
  • Application: Used widely for aluminum alloy, rack assembly and clamping lock, used with T-nuts, good fastening effect..
  • Notice: When purchasing, please confirm the size of your aluminum profile or T-groove to ensure that it matches the size of our T-bolt..
Check Stock

uxcell M8x30mm T-Slot Drop-in Stud Sliding Bolt Screw Carbon Steel for 40 Series Aluminum Profile 5pcs

  • Head Size: 19 x 8.5 x 5.5mm/0.75" x 0.33" x 0.22"(L*W*T).
  • Advantage: Carbon steel T screw bolt screws nuts surface chrome finish, quenching and tempering heat treatment, not easy corrosion, and high-hardness..
  • Application: Used widely for aluminum alloy, rack assembly and clamping lock, used with T-nuts, good fastening effect..
  • Notice: When purchasing, please confirm the size of your aluminum profile or T-groove to ensure that it matches the size of our T-bolt..
Check Stock

Stainless Steel T-Bolt T-Slot Bolt T-Shaped Platen Screw GB37 M10 M12 304 1 Pcs M10 45mm

  • Head Size: 19 x 8.5 x 5.5mm/0.75" x 0.33" x 0.22"(L*W*T).
  • Advantage: Carbon steel T screw bolt screws nuts surface chrome finish, quenching and tempering heat treatment, not easy corrosion, and high-hardness..
  • Application: Used widely for aluminum alloy, rack assembly and clamping lock, used with T-nuts, good fastening effect..
  • Notice: When purchasing, please confirm the size of your aluminum profile or T-groove to ensure that it matches the size of our T-bolt. When installing, put the screw head into the profile groove and turn it 90 degrees to clamp it..
Check Stock

Dye M3+ Paintball Marker - Battleship 2.0

  • FL-21 Bolt - The FL-21 Bolt System with an all-new 2-Stage Flex Face Bolt Tip sets a new standard for dependability and performance. Designed to operate across the widest range of extreme conditions, the FL-21 bolt provides unmatched performance without sacrificing reliability..
  • Flex Face Bolt Tip - The all-new 2-Stage Flex Face Bolt Tip within the FL-21 Bolt System maintains ideal bolt speed throughout the bolt cycle. A slow, soft first stage for optimal paint handling and a second stage with a speed boost to maximize valve lift operation..
  • Quick Release Bolt - The proven Quick Release Bolt Assembly is a robust steel gate system that securely hold the bolt in place. A simple push button system allows the user to remove and re-install the bolt kit in seconds. Standard maintenance has never been easier or more accessible..
  • SLAP ASA Slide Lock AirPort - DYE’s Slide Lock AirPort (SLAP) ASA is all-new for the M3+. The new enclosed SLAP design provides longterm dependability in a rugged and easy-to-operate package. The shielded design has no button to operate, no knob to turn and no lever to get snagged. All critical operations are protected by the Slide Lock Cover. Simply press and slide the lock cover back to engage the air supply with ease..
Check Stock

Dye M3+ Paintball Marker - F&CK Cancer PGA

  • FL-21 Bolt - The FL-21 Bolt System with an all-new 2-Stage Flex Face Bolt Tip sets a new standard for dependability and performance. Designed to operate across the widest range of extreme conditions, the FL-21 bolt provides unmatched performance without sacrificing reliability..
  • Flex Face Bolt Tip - The all-new 2-Stage Flex Face Bolt Tip within the FL-21 Bolt System maintains ideal bolt speed throughout the bolt cycle. A slow, soft first stage for optimal paint handling and a second stage with a speed boost to maximize valve lift operation..
  • Quick Release Bolt - The proven Quick Release Bolt Assembly is a robust steel gate system that securely hold the bolt in place. A simple push button system allows the user to remove and re-install the bolt kit in seconds. Standard maintenance has never been easier or more accessible..
  • SLAP ASA Slide Lock AirPort - DYE’s Slide Lock AirPort (SLAP) ASA is all-new for the M3+. The new enclosed SLAP design provides longterm dependability in a rugged and easy-to-operate package. The shielded design has no button to operate, no knob to turn and no lever to get snagged. All critical operations are protected by the Slide Lock Cover. Simply press and slide the lock cover back to engage the air supply with ease..
Check Stock

CZC AUTO Hitch Tightener, Heavy Duty Anti-Rattle Stabilizer for 1.25\ and 2\ Hitches, Reduce Movement from Hitch Tray Cargo Carrier Bike Rack Trailer Ball Mount, Rust Free (1 Pack, Carbon Steel)

  • CZC AUTO hitch tightener equiped with heavy duty φ0.4" U-bolt and 0.28" thick black powder coated plate anti-rattle stabilizer, can undertake all weather condition, rust free..
  • Reduce rattle and movement for hitch tray, cargo carrier, bike rack, trailer ball mount with brands curt,highland, goplus, pro series, rola, yakima, thule, etc. Can help to decrease noise and give you a quiet world when towing..
  • This tow clamp is perfect for locking 1.25" and 2" hitches, compatible with most hitches classes I, II, III, and IV (1, 2, 3 and 4). Suitable for trailer truck SUV sedan RV camper van and minivan..
  • Easy to install, after insert the tube, lock them directly by U-bolt and plate, put on original spring washers, flat washers and fasten by nuts, then done. If the hitch is low, and there is a risk for U-Bolt to scrap ground, lock the tightener from the bottom..
  • New arrival with very good price for only 1 month. Do not miss this price in hesitation. Please feel free to contact us at first if there is any problem when you receive or use our products. We are always here to support you..
Check Stock