Reviews Quiet Tone Mufflers

Speedway 2.5" Mild Steel DIY Custom Mandrel Exhaust Pipe Bend Kit w/Mufflers

  • Premium 16-gauge steel construction of both tubing and mufflers to provide long lasting performance.
  • Each tube is expanded on one end to allow easy slip fit installation.
  • 2.5" mandrel bent tubing is full size throughout the bend for maximum flow and increased power.
  • Two chamber mufflers with twin baffles to reduce drone and interior noise while maintaining a deep powerful tone.
  • Mufflers are offset inlet and center outlet configuration to fit a variety of muscle car and hot rod applications.
Check Stock

Speedway 2.25" Mild Steel DIY Custom Mandrel Exhaust Pipe Bend Kit w/Mufflers

  • Premium 16-gauge steel construction of both tubing and mufflers to provide long lasting performance.
  • Each tube is expanded on one end to allow easy slip fit installation.
  • 2-1/4" mandrel bent tubing is full size throughout the bend for maximum flow and increased power.
  • Two chamber mufflers with twin baffles to reduce drone and interior noise while maintaining a deep powerful tone.
  • Mufflers are offset inlet and center outlet configuration to fit a variety of muscle car and hot rod applications.
Check Stock

Delkevic Stubby 14" Stainless Steel Oval Muffler

  • This is a slip on muffler and is not bike specific. We manufacture 300+ motorcycle specific pipes, we do not guarantee this muffler fits any specific model. Please search our products for bike specific fitment..
  • Delkevic Stubby 14" stainless steel oval mufflers are manufactured from high-grade 304 stainless steel polished to a mirror finish. These mufflers give a decent increase in sound over the stock muffler but can be fairly quiet in lower RPM..
  • This set includes all necessary hardware to mount the muffler onto the engine. Gaskets are included..
  • No rejetting or remapping is required after fitment on a stock bike however we always recommend a dyno test. If the motorcycle has other modificaitons to the intake or exhaust system some tuning may be required..
  • Delkevic mufflers are handcrafted from the finest quality materials to enhance your motorcycle in both performance and looks..
Check Stock

Delkevic Aftermarket Slip On compatible with Honda ST1300 (2003-2015) with 18" Carbon Fiber Oval Muffler

  • Delkevic 18" carbon fiber oval mufflers are manufactured from a pre-formed carbon fiber composite sleeve and 304 stainless steel. This muffler has the quietest, deepest tone of mufflers we offer. This will be the closest sounding to stock available and best for long haul trips..
  • This set includes all necessary hardware to mount the muffler onto the engine..
  • No rejetting or remapping is required after fitment on a stock bike however we always recommend a dyno test. If the motorcycle has other modificaitons to the intake or exhaust system some tuning may be required..
  • Delkevic mufflers are handcrafted from the finest quality materials to enhance your motorcycle in both performance and looks..
Check Stock

Delkevic Aftermarket Slip On compatible with Honda ST1300 (2003-2015) with 18" Stainless Steel Oval Muffler

  • Delkevic 18" stainless steel oval mufflers are manufactured from high-grade 304 stainless steel and polished to a mirror finish. This muffler is has the deepest, quietest tone of mufflers we offer. It will be the closest sounding to stock and the best choice for long haul trips..
  • This set includes all necessary hardware to mount the muffler onto the engine..
  • No rejetting or remapping is required after fitment on a stock bike however we always recommend a dyno test. If the motorcycle has other modificaitons to the intake or exhaust system some tuning may be required..
  • Delkevic mufflers are handcrafted from the finest quality materials to enhance your motorcycle in both performance and looks..
Check Stock

Peastorm Glasspack 3 Inch Muffler Exhaust Pipe, Universal Performance Resonator Dual Loud Exhaust Tip 3 Inch Inlet for Trucks Car

  • Universal performance mufflers 3" OD inlet/outlet 15.5" long 4.3" round body width, as long as your exhaust pipe is 3 inch and have enough space to install, it will be fit..
  • Utilizes spiral design helps strengthen back pressure at low rpms, and improve exhaust efficiency at high rpm..
  • The quiet resonator adopts a unique double-layer spiral structure, filled with fiberglass absorbs unwanted interior resonance, get a low, deep tone, both ends can be inlet, no inlet or outlet difference..
  • Stainless steel construction provides long-lasting durability, withstands high exhaust temperature..
  • This product needs to be welded or linked with clamps, and professional installation is strongly recommended..
Check Stock

Delkevic Aftermarket Slip On compatible with Honda ST1300 (2003-2015) with DL10 with Stubby 14" Carbon Fiber Round Muffler

  • Delkevic DL10 14" carbon fiber round mufflers are manufactured from a pre-formed composite carbon fiber sleeve and 304 stainless steel. These mufflers give a decent increase in sound over the stock muffler but can be fairly quiet in lower RPM..
  • This set includes all necessary hardware to mount the muffler onto the engine..
  • No rejetting or remapping is required after fitment on a stock bike however we always recommend a dyno test. If the motorcycle has other modificaitons to the intake or exhaust system some tuning may be required..
  • Delkevic mufflers are handcrafted from the finest quality materials to enhance your motorcycle in both performance and looks..
Check Stock

Peastorm Glasspack 2.5 Inch Muffler Exhaust Pipe, Universal Performance Resonator Dual Loud Exhaust Tip 2.5 Inch Inlet for Trucks Car

  • Universal performance mufflers 2.5" OD inlet/outlet 15.5" long 4" round body width, as long as your exhaust pipe is 2.5 inch and have enough space to install, it will be fit..
  • Utilizes spiral design helps strengthen back pressure at low rpms, and improve exhaust efficiency at high rpm..
  • The quiet resonator adopts a unique double-layer spiral structure, filled with fiberglass absorbs unwanted interior resonance, get a low, deep tone, both ends can be inlet, no inlet or outlet difference..
  • Stainless steel construction provides long-lasting durability, withstands high exhaust temperature..
  • This product needs to be welded or linked with clamps, and professional installation is strongly recommended..
Check Stock

Delkevic Full 4-2 Exhaust compatible with Honda Goldwing GL1100 SL10 14' Stainless Steel Round Muffler 80-83

  • Delkevic SL10 14″ stainless steel round mufflers are manufactured from high-grade 304 stainless steel. This muffler gives a decent amount of sound over stock but can be fairly quiet with in low RPM. This is a great pipe if you want some sound but not to be too loud..
  • This set includes all necessary hardware to mount the muffler onto the engine. Gaskets are included..
  • No rejetting or remapping is required after fitment on a stock bike however we always recommend a dyno test. If the motorcycle has other modificaitons to the intake or exhaust system some tuning may be required..
  • Delkevic mufflers are handcrafted from the finest quality materials to enhance your motorcycle in both performance and looks..
Check Stock

Delkevic Aftermarket Slip On compatible with Honda ST1300 (2003-2015) with SL10 14" Stainless Steel Round Muffler

  • Delkevic SL10 14" stainless steel round mufflers are manufactured from high-grade 304 stainless steel. This muffler gives a decent amount of sound over stock but can be fairly quiet with in low RPM. This is a great pipe if you want some sound but not to be too loud..
  • This set includes all necessary hardware to mount the muffler onto the engine..
  • No rejetting or remapping is required after fitment on a stock bike however we always recommend a dyno test. If the motorcycle has other modificaitons to the intake or exhaust system some tuning may be required..
  • Delkevic mufflers are handcrafted from the finest quality materials to enhance your motorcycle in both performance and looks..
Check Stock

Borla 140496 Cat-Back Exhaust System

  • Full stainless steel exhaust for maximum durability and corrosion resistance.
  • Custom mufflers tuned to generate the highest quality exhaust tone possible.
  • Straight through exhaust system to maximize exhaust flow and minimize backpressure to boost performance.
  • Full system is back up by a million mile warranty. 2.50inches diameter front pipe, 2.00inches diameter split-rea pipes.
Check Stock

Borla 11827 Exhaust System for Jeep Grand Cherokee

  • Full stainless steel exhaust for maximum durability and corrosion resistance.
  • Custom aggressive mufflers tuned to generate the highest quality exhaust tone possible.
  • Straight through exhaust system to maximize exhaust flow and minimize backpressure to boost performance.
  • Full system is back up by a million mile warranty.
Check Stock

Borla 11826 Exhaust System for Jeep Grand Cherokee

  • Full stainless steel exhaust for maximum durability and corrosion resistance.
  • Custom aggressive mufflers tuned to generate the highest quality exhaust tone possible.
  • Straight through exhaust system to maximize exhaust flow and minimize backpressure to boost performance.
  • Full system is back up by a million mile warranty.
Check Stock